Español Advanced Search Results
Refine your search by using the category filter.
Ideal for preservation, coatings, and formulations. High melting point
High-purity nickel pellets for chemical reactions and special alloys.
High-viscosity, partially hydrolyzed polyvinyl alcohol for diverse applications.
Copper Powder 99.3%, Mesh 325
Ultra-fine, high-purity copper powder made via water atomization and hydrogen reduction. Features spheroidal particles and clusters, offering higher conductivity and lower density. Suitable for metal injection molding and applications requiring high conductivity and purity. Typical applications include conductive inks, paints, pastes, thermal sprays, and sintered products. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will show conductivity when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.31% |
| Hydrogen Loss | 0.39% |
| Apparent Density | 2.97 g/cc |
| Mesh Size | 325 mesh |
| Sieve Analysis |
+60 Mesh: 0% -60/+80 Mesh: 0% -80/+100 Mesh: 0% -100/+140 Mesh: Trace -140/+200 Mesh: Trace -200/+325 Mesh: 0.6% -325 Mesh: 99.4% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Conductive inks, paints, and pastes
- Injection molding
- Thermal management
- EDM electrodes
- Antifouling paints
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder 99.8%, Electronic Grade, Mesh 325
Electronic grade, high-purity copper powder made via water atomization and hydrogen reduction. Features ultra-fine, spheroidal particles with high conductivity and low density. Recommended for a variety of applications where conductivity is crucial, including thick and thin film pastes, capacitor chips, and thermal sprays. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will conduct when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.85% |
| Hydrogen Loss | 0.19% |
| Apparent Density | 2.97 g/cc |
| Mesh Size | 325 mesh |
| Sieve Analysis | +60 Mesh: 0% -60/+80 Mesh: 0% -80/+100 Mesh: 0% -100/+140 Mesh: Trace -140/+200 Mesh: Trace -200/+325 Mesh: 0.6% -325 Mesh: 99.4% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Capacitor chips
- End cap terminators
- Conductive inks, paints, and pastes
- Injection molding
- Electronics
- Thermal management
- EDM electrodes
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Gum Rosin Lumps, Honduran, Grade WG/WW
DOWNLOAD SDSHonduran Gum Rosin Lumps (HROSIN) are high-grade colophony derived from the Pinus Oocarpa species in Honduras. This semi-transparent pine rosin varies in color from pale yellow to light brown and contains about 10% natural unsaponifiable matter, which imparts anticrystalline properties to the rosin and its compounds. The product is widely used in adhesives, coatings, chewing gums, cosmetics, linoleum, paints, printing inks, resins, rubber, sizes, and varnishes.
Product Specifications
| Color Grade USDA | WG/WW |
| Appearance | Pale Yellow, Transparent |
| Softening Point (Ring & Ball) | 66 – 72°C |
| Acid Number (mgKOH/g) | 147 – 155 |
| Specific Gravity @ 25°C | 1.06 – 1.08 |
| Refractive Index @ 20°C | 1.540 |
| Unsaponifiable Matter | 7 – 12.1% |
| Toluene Insolubles | 0.01% Max. |
| Iron Content | 15 PPM Max. |
| Ash Content | 0.01% Max. |
| Volatile Matter | Negligible |
| Flash Point °C (COC) | Above 204°C |
Applications and Benefits:
- Used in adhesives for strong bonding properties.
- for coatings, varnishes, and linoleum production.
- Popular in chewing gums and cosmetics formulations.
- Widely applied in paints, printing inks, and resins.
- Suitable for rubber, sizes, and industrial applications.
Caution:
Handle with appropriate safety measures. Refer to the SDS for detailed safety and handling instructions.
Mechanical Tally Counter
Count anything with the mechanical tally counter - no batteries required. Counts up to 9,999 laps, runs, goals, strokes, overs, hits, people, goods delivered, and more. Reset knob in one side with metal ring for secure holding in hands. Suitable for business, pleasure, and many sports.
Key Features:
- 1 Pack = one assorted-color counter.
- 5 Pack = all five counters.
- Counts up to 9,999
- No batteries required
- Reset knob with metal ring
- Suitable for business, pleasure, and many sports
- Counts laps, runs, goals, strokes, overs, hits, people, goods delivered, and more
Product Specifications:
| Count Range | 0000 - 9999 |
| Reset Method | Rotating clockwise |
| Suitable For | Business, pleasure, and many sports (cricket, triathlon, baseball, basketball, walking, cycling, parachuting, rifle shooting, bird watching, bat watching, sport training, football, hockey, stool ball, golf, skating, etc.) |
| Materials | ABS plastic case |
| Additional Information | Lightweight and durable. Can also be used for counting trees, plants, fishing, even karaoke and other singing contests. |
Count Anything with the Mechanical Tally Counter - No Batteries Required
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: Keep away from children as it contains small parts that can be a choking hazard. Do not use in wet or damp conditions as it is not waterproof. Use with caution and follow instructions carefully to avoid injury.
Perfect for:
- Students
- Teachers
- Wholesale buyers
- Sports enthusiasts
- Business professionals
- Anyone who needs to count anything!
Microcrystalline Wax, High Melt
Microcrystalline Wax, High Melt (Product Code: WX6575) is an acid-free inert wax made from petroleum. This wax is specifically designed for preservation, coatings, and formulations. It is known for its high melting point, making it suitable for impregnating corrosion-encrusted materials, wood objects, and coating metal surfaces. Moreover, it serves as a key ingredient in various formulations, including relining paintings, varnishes, polishes, and for securely positioning objects and statuary.
Melting Point: 73-79°C (165 - 175°F)
Viscosity at 210°F: 10 - 14 CPS
Needle Penetration at 110°F: 122 DMM
ODOR: Pass
Visual Inspection: Pass
Color Saybolt >=8
Key Features:
- Ideal for preservation, coatings, and formulations
- High melting point for durability
- Acid-free and inert
Product Specifications:
| Melting Point | 73-79°C (165 - 175°F) |
| Viscosity at 210°F | 10 - 14 CPS |
| Needle Penetration at 110°F | 122 DMM |
| ODOR | Pass |
| Visual Inspection | Pass |
| Color Saybolt | >=8 |
Similar Products:
- Wax for Preservation
- Coating Wax
- Formulation Wax
- Inert Wax
- High Melting Point Wax
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for professionals in preservation, coatings, and formulations. Adapted to meet the specific needs and interests of professionals in these fields.
Nickel Pellets, Electrolytic Grade
Nickel Pellets, Electrolytic Grade are highly pure with a purity level of at least 99.9%. These pellets are perfect for chemical reactions and for making special alloys. With a diameter range of 6mm up to 18mm (1/4" up to 3/4"), these pellets are versatile and can be used for a variety of applications.
| Product Name: | Nickel Pellets, Electrolytic Grade (100 Grams) |
| Pellet Type: | Pellets |
| Grade: | Electrolytic |
| Purity: | At least 99.9% |
| Suitable for: | Chemical reactions and making special alloys |
| Pellet Diameter: | 6mm up to 18mm (1/4" up to 3/4") |
Similar Products
- Nickel Powder, High Purity (100 Grams)
- Nickel Wire, Electrolytic Grade (1 Meter)
- Nickel Foil, Ultra-Thin (10 Grams)
- Nickel Sheet, High Purity (50 Grams)
- Nickel Rod, Electrolytic Grade (1 Meter)
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: Handle with care and use appropriate protective equipment when handling nickel pellets, as they may pose a hazard if ingested or inhaled. Keep out of reach of children and animals.
Perfect for:
- Chemical laboratories
- Manufacturers of special alloys
- Chemical researchers
- Industrial chemists
- Metallurgists
- Engineering students
Note: The target audience for this product is professionals and students in the fields of chemistry, metallurgy, and engineering who require high-purity nickel pellets for their work. The language and tone of the description should be technical and informative to cater to their needs and interests.
WX7580 is a high melting point paraffin waxes blend that comes in 12-lb slabs. It is white when solid, but clear when melted.
For laboratory use, industrial applications, cosmetics applications, arts, sculpture, candles and more.
Comment: This product conforms to FDA 21CFR172.886
High Melt Point Paraffin Wax 4045H, 10-Lb Slab
This high melt point paraffin wax (melting point range 130–135 °F / 54–57 °C) is a blend of refined paraffinic hydrocarbons designed for hurricane candles, tapers, alcove, and single-pour votives. It enables pronounced mottling when used with appropriate additives. With a nominal melt point of 143 °F (62 °C), it provides sufficient rigidity for free standing forms such as pillars and molded novelties. Recommended pour temperature is 140–145 °F (60–63 °C) for optimal surface quality. Supplied in solid slabs of approximately 10 lb (±0.4 lb) for efficient handling in production environments.
Product Specifications
| Melting Point Range | 130–135 °F (54–57 °C) |
| Nominal Melt Point | 143 °F (62 °C) |
| Recommended Pouring Temperature | 140–145 °F (60–63 °C) |
| Packaging | 10 lb slab (approx. 10.4 lb) |
| Applications | Votive, Pillar, Taper, Novelty, and Decorative Candles |
| Additives | Recommended for optimal results |
Applications and Benefits:
- Formulated for multiple candle types
- Enables full mottling effect
- Requires additives for optimal performance
- High melt point for superior structure
- Produces smooth and consistent candle surfaces
Caution:
Use proper safety practices when heating wax. Always monitor temperatures and avoid overheating. Work in a well-ventilated area.
Paraffin Wax, USP II, Kosher, Pastilles, 140°-145°
Paraffin Wax, USP II, Kosher, in pastille form, features a melting point of 140°-145°. This non-toxic, non-irritating, and non-reactive wax is kosher-certified and offers excellent water barrier properties. It is widely used in polishes, cosmetics, candles, waterproofing, sealing, lubricating, plant and food protection, pharmaceutical ointments, electronics, hot melt adhesives, and more. Certificate of Analysis (COA) is available free of charge for orders of one or more 55-lb bags. Ships within 2 days.
Product Specifications
| CAS No. | 8002-74-2 |
| EINECS# | 232-315-6 |
| Melting Point | 140°-145° |
| Congealing Point (ASTM D938) | 139°-144° |
| Acid Value (USP 401) | ≪1 |
| Saponification Value (USP 401-Modified) | ≪1 |
| Penetration (ASTM D1321) | 11-18, 100g, 5 Sec @ 25° |
| Color (Visual) | White |
Applications and Benefits:
- Polishes, cosmetics, and candles for improved performance.
- Waterproofing and sealing for industrial and commercial use.
- Food, fruit, cheese, and vegetable protection coatings.
- Pharmaceutical ointments and salves.
- Hot melt adhesives and electronic insulation.
Caution:
Not tested on animals. Handle with care following standard guidelines. Refer to the SDS for safety and handling instructions.
Polyvinyl Alcohol Grade 49-88
PVOH Solution PreparationPolyvinyl Alcohol Grade 49-88 is a high-viscosity (49 cps for a 4% solution) and partially hydrolyzed (88%) water-soluble polymer. Equivalent to PVOH5042, Elvanol® 50-42, SELVOL 540, and POVAL 49-88, it dissolves in cold water but benefits from heating or warm water for complete dissolution. This polymer offers high tensile strength, tear resistance, and excellent properties as a disperser and stabilizer. Applications include stabilizing vinyl acetate, polystyrene, and polyvinyl chloride emulsions, re-moisturizing adhesives, temporary binders for ceramics, water-soluble films, paper adhesives, photosensitive coatings, and as a soil anti-redeposition agent. PVOH 49-88 is also widely used in personal care, construction, textile, and emulsion industries and is a key ingredient for making slime.
Product Specifications
| Viscosity (4% Solution) | 47–49 cps |
| Hydrolysis Level | 88% (partially hydrolyzed) |
| Solubility | Cold-water soluble (heating recommended for complete dissolution) |
| Equivalent Products | PVOH5042, Elvanol® 50-42, SELVOL 540, Poval 49-88 |
| Applications | Emulsions, adhesives, coatings, paper, ceramics |
Applications and Benefits:
- Stabilization of vinyl acetate, polystyrene, and PVC emulsions
- Binder for adhesives and paper coatings
- Temporary binder for ceramics
- Water-soluble films and photosensitive coatings
- Soil anti-redeposition agent
- Key ingredient for slime making
Caution:
Handle in accordance with recommended safety procedures. Refer to the Safety Data Sheet for detailed handling and storage guidelines.
Potassium Iodide 99% USP
Potassium iodide granular 99% USP grade. For laboratory, industrial, research, and educational uses. USP-grade potassium iodide may be used in manufacturing potassium iodide tablets. Each adult dosage is 135 mg, with one ounce of potassium iodide equivalent to 207 adult doses. Actual purity is 100% (dried).
Product Specifications
| Old Product Code | PI200 |
| Assay (Dried Basis) | 99.0 – 101.5% (100% actual) |
| Loss on Drying | 0.2% (Specs: < 1%) |
| Iodate | < 0.0004% |
| Heavy Metals | < 0.001% |
| pH (5% solution at 25ºC) | 6 - 10 (Measured: 6.4) |
| Lead (FCC) | < 4 mg/kg |
| Additional Tests | Conforms to USP specifications |
Applications and Benefits:
- Manufacturing potassium iodide tablets
- Laboratory and research uses
- Industrial and educational applications
Caution:
For laboratory, industrial, research, and educational uses only.
Certificate Of Analysis (COA) available for orders of one or more 55-lb bags. Typical analysis is displayed below the price list.
SP-128 Wax Compound
The SP-128 Wax Compound is a flexible blending component suitable for a wide array of applications, featuring a pure white color and a congealing point of about 68°C (155°F). Its compatibility with many vegetable and mineral waxes, alongside a variety of natural and synthetic ingredients, makes it a prime choice for various industries. Note: This product is available in limited quantities and lacks a detailed product data sheet.
Key Features
- Compatible with vegetable and mineral waxes
- Works with natural and synthetic ingredients
- Pure white color for clean formulations
- Precise 68°C congealing point
- Limited availability with no product data sheet
Product Specifications:
| Color | White |
| Congealing Point | ~68°C (155°F) |
| Compatibility | Vegetable and mineral waxes, natural and synthetic ingredients |
| Availability | Limited quantity |
| Data Sheet | Not available |
Similar Products
- White beeswax, 65°C melting point
- Soy wax flakes, natural, biodegradable
- Paraffin wax, high melt, 70°C
- Carnauba wax, hard, vegan
- Candelilla wax, plant-based, 69°C melt
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for candle makers, cosmetic manufacturers, artisans, industrial users, and hobbyists seeking versatile and high-quality wax compounds.
- 1