Advanced Search Results
Refine your search by using the category filter.
Coconut shell granular activated carbon for gas and liquid purification.
Antioxidant blend for polymers, non-blooming, FDA-listed, non-staining.
Synthetic triarylmethane blue colorant, soluble in water and glycerol.
FDC Blue #2, Food Blue 1, Indigo Carmine
Indigo Carmine, also known as FDC Blue #2 or Food Blue 1, is a water-soluble organic dye derived from indigo through aromatic sulfonation. Approved for use as a food colorant in the United States and European Union, it imparts a vibrant blue hue. Additionally, it serves as a pH indicator, transitioning from blue at pH 11.4 to yellow at 13.0. Its versatility extends to being a redox indicator, turning yellow upon reduction, and a dissolved ozone indicator. Applications range from food coloring to surgical and biological staining. Its EC Number is 212-728-8, CAS Number is 860-22-0, Molecular Weight is 466.35, and Color Index Number is 73015.
Key Features
- Vibrant blue colorant for food and industrial use
- Water-soluble and organic
- Acts as pH indicator and redox indicator
- Also functions as a dissolved ozone indicator
- Approved for use in the US and EU
Product Specifications:
| Property | Value |
| EC Number | 212-728-8 |
| CAS Number | 860-22-0 |
| Molecular Weight | 466.35 |
| Color Index Number | 73015 |
Similar Products:
- Blue Organic Dye
- Water-Soluble Food Colorant
- pH Indicator Solution
- Redox Indicator Dye
- Ozone Indicator Solution
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Food and Beverage Manufacturers, Pharmaceutical Companies, Laboratory Technicians, Chemical Suppliers, Food Safety Inspectors.
FD&C RED 40 Powder, Allura Red AC
Allura Red AC is a water soluble red azo dye that goes by several names, including FD&C Red 40. It is used as a food dye and has the E number E129. In solution, its maximum absorbance lies at about 504 nm (Absorbs green color). In the United States, Allura Red AC is approved by the FDA for use in cosmetics, drugs, and food. It is used in some tattoo inks and is used in many products, such as cotton candy, soft drinks, cherry-flavored products, children’s medications, and dairy products. It is occasionally used to dye medicinal pills, such as the antihistamine fexofenadine, for purely aesthetic reasons. FDC RED 40 is by far the most commonly used red dye in the United States,[8] completely replacing amaranth (Red 2) and also replacing erythrosine (Red 3) in most applications due to the negative health effects of those two dyes. Information provided in this page are from the manufacturer, supplier or online resources. CAS Number: 25956-17-6 C.I.# 16035
Product Specifications
| CAS Number | 25956-17-6 |
| C.I. Number | 16035 |
| Absorbance | 504 nm |
| Applications | Food, cosmetics, drugs, tattoo inks |
| Approval | FDA |
Applications and Benefits:
- Water-soluble for easy application
- FDA-approved for safety and reliability
- Versatile use across food, cosmetics, and more
- Vivid red color with maximum absorbance at 504 nm
- Replaces other dyes due to superior safety profile
Caution:
Ensure proper application as per industry regulations. May cause allergic reactions in sensitive individuals.
Synonyms:
Allura Red AC, FD&C Red 40, E129, C.I. 16035.
Sodium Tripolyphosphate (Food Grade, Kosher)
Sodium tripolyphosphate, also known as sodium triphosphate or STPP, is mainly consumed as a component of commercial detergents. It serves as a builder or water softener, particularly in hard water containing high concentrations of magnesium and calcium ions. In such conditions, detergents can be deactivated. However, STPP, being a highly charged chelating agent, tightly binds to calcium and magnesium ions, preventing their interference with sulfonate detergent performance.
STPP is not only used in detergents but also serves as a preservative for seafood, meats, poultry, and animal feeds. In the food industry, it is commonly known as E451 and finds usage as an emulsifier and moisture retainer. Many governments regulate the quantities allowed in foods, as STPP can substantially increase the sale weight of seafood. The United States Food and Drug Administration recognizes STPP as "generally recognized as safe."
Sodium tripolyphosphate is available in low density, medium density, and high-density granular powders. The specific product being described here is a medium density variant. It is categorized as food (FCC) grade, granular, medium density, and Kosher-certified. Besides its primary uses in water softening and as a sequestering agent, STPP can also function as a peptizing or deflocculating agent. Furthermore, it has applications in detergents, soaps, and ceramics.
The chemical structure of sodium tripolyphosphate is [Na5P3O10]n. It is also known by synonyms such as sodium triphosphate, triphosphoric acid pentasodium salt, sodium phosphate tripoly, STPP, pentasodium triphosphate, and pentasodium tripolyphosphate. The product is packaged in 50-lb bags by the original manufacturer, while smaller quantities are repacked for laboratory, research, and industrial uses. The CAS number for sodium tripolyphosphate is [7758-29-4][Na5O10P3]n.
Sodium tripolyphosphate exhibits low toxicity, making it a safe choice for various applications.
Key Features:
- Effective detergent component and water softener
- Chelating agent that prevents interference with sulfonate detergents
- Preservative for seafood, meats, poultry, and animal feeds
- Emulsifier and moisture retainer in food production
- Regulatory compliance and recognized as safe by FDA
Product Specifications:
| Chemical Structure | [Na5P3O10]n |
| Synonyms | Sodium triphosphate; Triphosphoric acid, pentasodium salt; Sodium Phosphate Tripoly; STPP; pentasodium triphosphate; Pentasodium Tripolyphosphate |
| Grade | Food (FCC) Grade, Granular, medium density, Kosher |
| Uses | Water softening, sequestering, peptizing or deflocculating agent. May also be used for detergents, soaps, and ceramics. |
| CAS # | [7758-29-4][Na5O10P3]n |
Similar Products:
- TripoClean - Advanced Water Softening Agent
- DetergoMax - Premium Detergent Builder
- Preservitex - Effective Food Preservative
- MoistureLock - Food Emulsifier and Moisture Retainer
- ChelaGuard - Powerful Chelating Agent for Industrial Use
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: Sodium tripolyphosphate is generally safe for use as directed. However, individuals with specific allergies or sensitivities should exercise caution and consult a healthcare professional if necessary.
Perfect for detergent manufacturers, food producers, and industries seeking versatile water softeners, preservatives, and chelating agents.
Activated Carbon Powder
Powdered activated carbon, derived from selected grades of coconut shell, is a virgin product designed for liquid phase applications. It efficiently removes organics from water streams and is certified by the NSF for use in drinking water and food-grade applications.
Product Specifications
| Mesh Size | -325 Mesh, 90% (min) |
| Iodine Number | 1100 mg/g (min) |
| pH | 8-10 |
| Ash Content | 4% (max) |
| Moisture Content | 5% (max) |
| Typical Density | 30-33 lbs/cuft, 0.48-0.53 g/cc |
Applications and Benefits:
- Removes organics from water streams.
- NSF certified for drinking water and food-grade use.
- Suitable for liquid phase purification.
- Derived from selected coconut shell grades for superior quality.
- High iodine number ensures effective performance.
Caution:
Wet activated carbon removes oxygen from the air, posing a severe hazard to workers inside carbon vessels. Follow confined space/low oxygen procedures per Local, State, and Federal guidelines before entry.
Activated Carbon, Granules
Coconut shell granular activated carbon, a virgin product, is designed for various gas and liquid phase purification applications. It is made from selected grades of coconut shell, offering superior hardness, long life expectancy, and clean operation. Certified by the NSF, it is suitable for drinking water and food-grade applications.
Product Specifications
| Mesh Size | 8 x 30, 90% (min) |
| Iodine Number | 1100 mg/g (min) |
| Surface Area | 1100 m²/g (min) |
| Hardness | 98% (min) |
| Ash Content | 4% (max) |
| Moisture Content | 5% (max) |
| Typical Density | 29-33 lbs/cuft, 0.46-0.53 g/cc |
Applications and Benefits:
- Removes organics from water streams.
- NSF certified for drinking water and food-grade use.
- Suitable for gas and liquid purification.
- Offers superior hardness and long life expectancy.
- Clean and efficient operation.
Caution:
Wet activated carbon removes oxygen from the air, posing a severe hazard to workers inside carbon vessels. Follow confined space/low oxygen procedures per Local, State, and Federal guidelines before entry.
AGERITE® SUPERLITE® SOLID PWD
AGERITE® SUPERLITE® SOLID PWD is an antioxidant blend designed for polymer compounds, including tires, wires and cables, footwear, adhesives, cements, and hot melt glues. It prevents discoloration or staining, making it suitable for white and light-colored products. This non-blooming antioxidant is FDA-listed and ideal for industrial and professional use.
Product Specifications
| Non-Blooming Dosage (phr) | 2.0+ |
| FDA Listed | Yes |
| Key Ingredient | 4,4-(Methylethylidene) bisphenol (Bisphenol A) (CAS# 80-05-7) |
| HMIS Information | H: 2, F: 1, R: 0, P: X |
| Components |
|
Applications and Benefits:
- Prevents oxidation in polymer compounds like tires, wires, and footwear.
- Non-staining and non-blooming, suitable for white and light-colored products.
- FDA-listed for safe use in regulated applications.
- Widely used in adhesives, cements, and hot melt glues.
- Effective for industrial and professional applications.
Caution:
Handle with care. Avoid inhalation and contact with eyes or skin. Refer to the SDS for detailed safety instructions.
Ammonium Chloride, 99.9%, Treated, Technical
Ammonium Chloride Treated is a white crystalline salt used in metal finishing, fluxing, electroplating, and as a processing aid in metalworking and textiles. It comes in white-fine crystals, is soluble in water and glycerol, and slightly soluble in alcohol. This chemical is used as a flux in preparing metals to be tin-coated, galvanized, or soldered. It works by cleaning the surface of workpieces, reacting with metal oxides to form volatile metal chlorides. Additionally, Ammonium Chloride has various applications as a fertilizer, in industries, laboratories, and more. It is commonly used in dry batteries, mordant (dyeing and printing), soldering flux, the manufacture of various ammonia compounds, fertilizer, pickling agent in zinc coating and tinning, electroplating, and washing powders. Quantity discounts apply. Perfect for metalworkers, chemical laboratories, farmers, textile and leather industries, and consumers looking for various applications.
Product Specifications
| Form | White fine crystals |
| Purity | 99.9% |
| Solubility | Soluble in water and glycerol; slightly soluble in alcohol |
| Common Uses | Metal finishing, fluxing, electroplating, fertilizer, dry batteries, mordant, soldering flux, pickling agent, and more |
Applications and Benefits:
- Used as a flux in tin-coating, soldering, and galvanization
- Ideal for metal finishing and electroplating
- Serves as a fertilizer in agriculture
- Used in dry cell batteries
- Functions as a mordant in textile and leather industries
- Applied in manufacturing ammonia compounds
- Used in washing powders and chemical processing
Caution:
Moderately toxic by ingestion. Handle with care.
Ammonium Nitrate, 99%
High-purity, technical grade prilled ammonium nitrate. Used in laboratories, agriculture as a high-nitrogen fertilizer, and industrial applications such as pyrotechnics, herbicides, and cold packs. Endothermic hydrating properties enable freezing mixtures.
Product Specifications
| Purity | 99% (typical analysis on dry bases) |
| Form | Granular (prilled) |
| CAS Number | 6484-52-2 |
| Hazard Class | Oxidizer 5.1 |
| Packing Group | III |
| SKU | AN1417F |
Applications and Benefits:
- Laboratory reagent
- High-nitrogen fertilizer for agriculture and gardening
- Cold packs and freezing mixtures
- Used in pyrotechnics
- Ingredient in herbicides and insecticides
Caution:
Due to the governmental regulations and logistical limitations, this product cannot be shipped outside of the 48 contiguous United States. This affects all chemicals classified as hazardous or restricted. We are currently unable to ship hazmat items to P.O. Boxes serviced by USPS. We ship all hazmat mail through UPS Ground shipping, and UPS doesn't service P.O. Boxes. If you enter a P.O. Box address and your order contains any hazardous materials, your order will be placed on hold and a Customer Service representative will be in contact for an alternative address or extra documentation via email or phone. If you are outside of the 48 contiguous United States, your order will be cancelled and refunded. Cancellation fees apply. Orders equal to or over 10 lbs require a Department of Homeland Security (DHS) form to be completed prior to shipment.
Barium Sulfate
Barium Sulfate (BaSO₄) is a chemically precipitated, high-purity compound widely used as a filler and functional additive in paints, coatings, pigments, plastics, and lead-acid batteries. Renowned for its outstanding chemical purity and narrow particle size distribution, Barium Sulfate offers excellent dispersion properties, high gloss, and low binder demand. Its extremely low chloride content and reduced electrical conductivity (100 µS/cm) make it ideal for demanding industrial applications. With an average particle size of 1.7 µm and an oil index of 13 g/100g, Barium Sulfate ensures optimal performance in various formulations. It is resistant to water, acids, alkalis, organic solvents, light, and industrial waste gases, including sulfur dioxide. Its versatility and exceptional properties make it a preferred choice for manufacturers in paints, coatings, plastics, and batteries.
Key Features
- Chemically precipitated, high-purity Barium Sulfate
- Excellent dispersion, high gloss, and low binder demand
- Extremely low chloride content and reduced electrical conductivity
- Resistant to water, acids, alkalis, and industrial gases
- Applications in paints, coatings, plastics, and batteries
Product Specifications
| Chemical Name | Barium Sulfate |
| CAS Number | 7727-43-7 |
| Chemical Formula | BaSO₄ |
| Particle Size | 1.7 µm (average) |
| Applications | Paints, coatings, plastics, pigments, batteries |
| Oil Index | 13 g/100g |
| Electric Conductivity | 100 µS/cm |
Perfect for industrial fillers and functional additives.
Beeswax, Refined Light Yellow
Natural Beeswax is used as a building material for honeycombs. Because of its soft, pliable nature, bee wax Cera Alba) remains an indispensable raw material for many finished products even after centuries of commercial use.
Applications:
Creams, Lotions, Lipsticks, Cold Creams, Depilatories, Ointments, Salves, Pharmaceutical Excipients, Food Additive, Food Inks and Coatings, Non-food Inks and Coatings, Emulsions, Color Cosmetics, Hair Care; Furniture, Wood, and Leather Polishes; Textile, Wood, and Paper Finishes; Lubricants, Candles, Moldings, and numerous industrial applications.
CAS#: 8012-89-3 Light Yellow Refined Beeswax
EINECS: 232-383-7
Beeswax is F.D.A. approved under Regulations 21 CFR 184.`1973 & CFR 184.1975
C.T.F.A. Listed
Key Features
- Soft, pliable nature suitable for honeycombs
- Essential for creams, lotions, and lipsticks
- Food additive for coatings and inks
- Widely used in furniture and wood polishes
- Meets FDA and C.T.F.A. standards
Product Specifications
Color : Light Yellow, BeigeDrop point/ Melting point : 61 - 67 °C
Acid value : 5 - 24 mg KOH/g (Typical : 6.8)
Ester value : 70 - 80 mg KOH/g
Saponification value : 85 - 104 mg KOH/g
Ester/Acid Ratio : 3.3 - 4.3
Ceresin, Paraffins and certain other waxes : passes test
Glycerol and other polyols : passes test
Form : granular, pastilles
Similar Products
- Yellow beeswax pellets for cosmetics
- Natural beeswax bars for crafting
- White beeswax pastilles for candle-making
- Organic beeswax sheets for DIY projects
- Pure beeswax blocks for wood polishing
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for cosmetic manufacturers, pharmaceutical companies, food industry professionals, artisans, crafters, and home DIY enthusiasts
High Purity Benzotriazole
High Purity Benzotriazole is a versatile chemical compound that consists of colorless needle-like crystals. It is slightly soluble in cold water, ethanol, and ether.
The product is mainly used as a rust-preventer, antifreezing liquid, and antioxidant additive in various industrial applications. It is commonly used as an additive in lubricating oil, hydraulic oil, brake oil, transformer's oil, and emulsion. Additionally, it is used as a water stabilizer, ultraviolet resistance and antistatic electricity agent, photographic antifogging agent, copper mine flotation agent, and more.
High Purity Benzotriazole is also used in many vapor phase inhibitors used in copper and copper alloy circulating water treatment agent, automobile antifreeze, polymer stabilizers, plant growth regulator, and UV absorbers. It can also be used with a variety of scale inhibitors, sterilization, and algicide.
Key Features:
- High purity
- Colorless needle-like crystals
- Slightly soluble in cold water, ethanol, and ether
- Versatile rust-preventer
- Antioxidant additive
- Used in various industrial applications
- Effective in many vapor phase inhibitors
- Can be used with a variety of scale inhibitors, sterilization, and algicide
Product Specifications:
| Appearance: | Colorless needle-like crystals |
| Solubility: | Slightly soluble in cold water, ethanol, and ether |
Similar Products:
- Sodium Benzoate
- Propyl Gallate
- Butylated Hydroxyanisole (BHA)
- Butylated Hydroxytoluene (BHT)
- Gallic Acid
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for industrial applications that require a versatile rust-preventer and antioxidant additive, as well as many other functions such as water stabilizer, UV absorber, and algicide.
Boric Acid NF/USP Grade, Powder
Boric Acid, NF/USP Grade, Powder. Boric Acid (H3BO3; CAS# 10043-35-3) is a weak acid of boron commonly used as an antiseptic, insecticide, flame retardant, neutron absorber, and a precursor for other chemical compounds. Additional applications include textile fiber glass, borosilicate glass, glazes and enamels, casting powder, and flux.
Product Specifications
| Chemical Name | Boric Acid |
| Synonyms | Orthoboric Acid, OPTIBOR NF, Hydrogen Borate, Acidum Boricum |
| Molecular Formula | H3BO3 |
| CAS Number | 10043-35-3 |
| SKU | B001NF |
Applications and Benefits:
- Antiseptic and antimicrobial applications
- Flame retardant properties
- Neutron absorber in nuclear applications
- Textile fiber glass and borosilicate glass manufacturing
- Used in glazes and enamels
- Serves as casting powder and flux
Caution:
This product cannot be used as an insecticide or for carpet or upholstery deodorization or flea control. It is not intended for food applications, human nutritional supplements, or as food additives or preservatives.
Brilliant Blue FCF (Blue 1) 50 pounds
Brilliant blue FCF (Blue 1) is a synthetic organic compound used primarily as a blue colorant for processed foods, medications, dietary supplements, and cosmetics. It is classified as a triarylmethane dye and is known under various names, such as FD&C Blue No. 1 or acid blue 9. It is denoted by E number E133 and has a color index of 42090. It has the appearance of a blue powder and is soluble in water and glycerol, with a maximum absorption at about 628 nanometers. It is one of the oldest FDA-approved color additives and is generally considered nontoxic and safe.
Key Features:
- Synthetic organic compound
- Used primarily as a blue colorant
- Classified as a triarylmethane dye
- Soluble in water and glycerol
- One of the oldest FDA-approved color additives
Product Specifications:
| Appearance | Blue powder 50 pounds |
| Solubility | Soluble in water and glycerol |
| E number | E133 |
| Color index | 42090 |
| FDA approval | Yes |
Perfect for processed food manufacturers and cosmetics companies.
Caution: Brilliant blue FCF is generally considered nontoxic and safe, but caution should be exercised when handling the powder or when using it in high concentrations.
Bromothymol Blue, Powder, >99%
Bromothymol Blue (also known as bromothymol sulfone phthalein, Bromthymol Blue, and BTB) is a chemical indicator for weak acids and bases. At a pH of 6.0 or lower, it appears yellow. It transitions in color between pH 6.0 and 7.6, becoming completely blue at pH 7.6.
Product Specifications
| Chemical Name | Bromothymol Blue |
| Synonyms | Bromothymol sulfone phthalein, BTB |
| Purity | >99% |
| Color Change Range | Yellow at pH ≤ 6.0, Blue at pH ≥ 7.6 |
| Chemical Formula | C27H27O5SBr2Na |
| Molecular Weight | 646.38 g/mol |
| CAS Number | 34722-90-2 |
Applications and Benefits:
- Used as a chemical indicator for weak acids and bases
- Facilitates pH measurement in the range of 6.0 to 7.6
- High purity powder for accurate scientific applications
- 1 gram prepares up to 10 liters (3 gallons) of indicator solution
Caution:
This high-purity product requires special procedures for solution preparation. For beginners, a ready-to-use solution (BTB10S) is recommended.
Bromothymol Blue Solution 0.04%
Strong solution of Bromothymol Blue (also known as bromothymol sulfone phthalein, Bromthymol Blue, and BTB) is a chemical indicator for weak acids and bases. In the pH of 6.0 or lower, it is yellow. It changes color between the pH of 6 to 7.6 when it becomes completely blue at the pH 7.6. This is a prepared solution and is ready for use. May be used as an acid/base indicator or as a stain for cell walls or nuclei.
Product Specifications
| Concentration | 0.04% |
| pH Range | 6.0 (yellow) to 7.6 (blue) |
| Uses | Acid/base indicator, cell staining |
Applications and Benefits:
- Effective chemical indicator for weak acids and bases.
- Color transition for precise pH measurement in the range of 6.0-7.6.
- Useful as a stain for cell walls and nuclei in biological studies.
- Ready-to-use solution for laboratory applications.
Caution:
Use with care in laboratory settings. Follow standard safety protocols for handling chemicals.
Bromothymol Blue, Powder, >99%
Bromothymol Blue (also known as bromothymol sulfone phthalein, Bromthymol Blue, and BTB) is a chemical indicator for weak acids and bases. At a pH of 6.0 or lower, it appears yellow. It transitions in color between pH 6.0 and 7.6, becoming completely blue at pH 7.6.
Product Specifications
| Chemical Name | Bromothymol Blue |
| Synonyms | Bromothymol sulfone phthalein, BTB |
| Purity | >99% |
| Color Change Range | Yellow at pH ≤ 6.0, Blue at pH ≥ 7.6 |
| Chemical Formula | C27H27O5SBr2Na |
| Molecular Weight | 646.38 g/mol |
| CAS Number | 34722-90-2 |
Applications and Benefits:
- Used as a chemical indicator for weak acids and bases
- Facilitates pH measurement in the range of 6.0 to 7.6
- High purity powder for accurate scientific applications
- 1 gram prepares up to 10 liters (3 gallons) of indicator solution
Caution:
This high-purity product requires special procedures for solution preparation. For beginners, a ready-to-use solution (BTB10S) is recommended.
HL-Synthetic Capsaicin (Nonivamide, PAVA) > 98% Purity
HL-Synthetic Capsaicin (Nonivamide) is a high-purity capsaicinoid used for controlled pungency, irritation, and sensory activation. Chemically identical in function to natural capsaicin, nonivamide delivers reliable heat, TRPV1 receptor activation, and long-term stability, making it ideal for research, industrial formulations, repellents, sensory testing, and specialty products.
Product Specifications
| Name | Synthetic Capsaicin |
| Formula | C17H27NO3 |
| Purity | >98% Pure |
| Molar Mass | 293.40 g/mol |
| Boiling Point | 200 to 210 °C (392 to 410 °F) at 0.05 Torr |
| Melting Point | ~54 °C |
| CAS Number | 2444-46-4 |
| Synonyms | Nonivamide, n-Vanillylnonanamide, PAVA |
Product details:
HL-Synthetic Capsaicin (CAS 2444-46-4), also known as Nonivamide or n-Vanillylnonanamide (PAVA), is a synthetic analog of capsaicin — the compound responsible for the heat of chili peppers. Unlike plant-derived capsaicin, nonivamide offers high purity, consistent potency, and superior stability, making it ideal for industrial, laboratory, and formulation use.
This material activates the TRPV1 pain and heat receptors, producing a strong burning sensation even at extremely low concentrations. Because of its predictable performance and long shelf life, nonivamide is widely used in repellents, sensory agents, topical research, defense products, flavor simulation, and chemical testing.
HL-Synthetic Capsaicin is supplied as a fine white to off-white crystalline powder with a minimum purity of > 98%, suitable for precise dosing and formulation.
Common Applications:
- Animal repellents & aversive coatings
- Pepper spray and defense formulations
- Sensory and irritation testing
- Research & laboratory use
- Pungency and heat simulation
- Pharmaceutical and cosmetic R&D
Why Use Nonivamide Instead of Natural Capsaicin?
-
- Higher purity
- More consistent potency
- Better shelf stability
- Easier formulation
- No agricultural variability
Caution:
Capsaicin is a chemical irritant that can produce a sensation of burning in any tissue it comes into contact with. It is for laboratory research and industrial use only. Handle with care and follow proper safety protocols.
Carbon Black
Carbon Black powder is a versatile pigment used in a wide range of products, including plastics, printing inks, adhesives, sealants, paints, and coatings. Specialty applications include lithium-ion batteries, non-impact printing, PVC pipe, non-woven fabrics, metallurgy, and paper.
Product Specifications
| CAS Number | 1333-86-4 |
| Color Index Number | CI 77266 |
| Packaging | Sold by weight in 44 lb presentation |
| Container Fill | Filled to approximately 95% |
| Smaller Packaging | 48 oz grip jars hold approximately 1 lb |
Applications and Benefits:
- Printing inks
- Paints and coatings
- Plastics
- Fiber and non-woven fabrics
- Paper production
- Construction materials
- Lithium-ion battery components
- Metallurgical applications
- High hiding power and color stability
- Excellent resistance to solvents, acids, alkalis, and heat
Caution:
Read the Safety Data Sheet before handling. For professional use only.
Carbon Electrode - High Purity Graphite Rod
(Pack Options Available)
This durable, high-quality graphite rod is designed for laboratory and industrial applications requiring superior conductivity and thermal properties. It is available in convenient pack sizes of 1, 10, or 100 rods to suit different project needs.
Key Features
- High purity, density and conductivity
- Durable
- 10 mm x 100 mm size
Product Specifications:
| Density: | 1.75 g/cc |
| Electric Resistivity: | 8-11 mega Ohm |
| Thermal Conductivity: | 121.1 W/m.k |
| Coefficient of thermal expansion: | 5.46 /ºC |
| Shore Hardness: | 42 HSD |
| Breaking Strength: | 38 MPa |
| Compressive Strength: | 65 MPa |
| Elasticity Modulus: | 9 Gpa |
| Gas hole ratio: | 17% |
| Granularity: | 13-15 micro |
Similar Products:
- Graphite Electrode - High Purity, 8 mm x 100 mm
- Carbon Electrode - High Density, 10 mm x 150 mm
- Graphite Rod - High Conductivity, 10 mm x 200 mm
- Carbon Rod - High Strength, 10 mm x 100 mm
- Graphite Electrode - High Temperature Resistance, 10 mm x 100 mm
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for scientists, engineers, and researchers in need of a high-quality graphite rod for various laboratory applications.
Carbon Electrode - Graphite Rod
Our Carbon Electrode - Graphite Rod is a highly conductive cylindrical graphite block, for forming electric arcs or as an electrode in basic electrolysis experiments. With a diameter of 10mm and a length of 100mm, this electrode is for students conducting experiments requiring a carbon electrode. The high conductivity and low density of the graphite material make it an choice for various applications.
Product Specifications
| Material | Graphite |
| Diameter | 10mm |
| Length | 100mm |
| Conductivity | High |
| Packaging | Single Pack, Pack of 10, Pack of 100 |
Applications and Benefits:
- for students conducting experiments requiring a carbon electrode
- Suitable for forming electric arcs or as an electrode in basic electrolysis experiments
- for experiments that require a highly conductive cylindrical graphite block
Key Features and Benefits
- Highly conductive graphite material
- Low density for performance
- 10mm diameter and 100mm length for precise applications
Caution:
This product is highly conductive and should be used with care. Always wear appropriate protective gear and follow proper safety protocols when working with electrodes.