Advanced Search Results
Refine your search by using the category filter.
Fine atomized aluminum powder for chemical, laboratory, industrial uses.
Aluminum Powder, Atomized Mesh 325
Fine aluminum metal powder with particle sizes ~44 microns or smaller. Suitable for chemical reactions, laboratory use, and industrial applications.
Product Specifications
| Particle Size | ~44 Microns or Smaller |
| Mesh Size | 325 Mesh |
| Applications | Chemical Reactions, Laboratory Use, Industrial Applications |
Applications and Benefits:
- Used in chemical reactions requiring fine aluminum powder.
- Suitable for laboratory testing and research.
- Ideal for industrial processes needing precise particle sizes.
Caution:
Handle with care. Avoid inhalation, sparks, and open flames during use.
Copper Powder 99.3%, Mesh 325
Ultra-fine, high-purity copper powder made via water atomization and hydrogen reduction. Features spheroidal particles and clusters, offering higher conductivity and lower density. Suitable for metal injection molding and applications requiring high conductivity and purity. Typical applications include conductive inks, paints, pastes, thermal sprays, and sintered products. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will show conductivity when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.31% |
| Hydrogen Loss | 0.39% |
| Apparent Density | 2.97 g/cc |
| Mesh Size | 325 mesh |
| Sieve Analysis |
+60 Mesh: 0% -60/+80 Mesh: 0% -80/+100 Mesh: 0% -100/+140 Mesh: Trace -140/+200 Mesh: Trace -200/+325 Mesh: 0.6% -325 Mesh: 99.4% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Conductive inks, paints, and pastes
- Injection molding
- Thermal management
- EDM electrodes
- Antifouling paints
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder 99.8%, Electronic Grade, Mesh 325
Electronic grade, high-purity copper powder made via water atomization and hydrogen reduction. Features ultra-fine, spheroidal particles with high conductivity and low density. Recommended for a variety of applications where conductivity is crucial, including thick and thin film pastes, capacitor chips, and thermal sprays. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will conduct when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.85% |
| Hydrogen Loss | 0.19% |
| Apparent Density | 2.97 g/cc |
| Mesh Size | 325 mesh |
| Sieve Analysis | +60 Mesh: 0% -60/+80 Mesh: 0% -80/+100 Mesh: 0% -100/+140 Mesh: Trace -140/+200 Mesh: Trace -200/+325 Mesh: 0.6% -325 Mesh: 99.4% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Capacitor chips
- End cap terminators
- Conductive inks, paints, and pastes
- Injection molding
- Electronics
- Thermal management
- EDM electrodes
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Magnetite, Natural, Mesh 325
Natural magnetite from mine, washed, ground, and screened to mesh 325 for use as black pigment, making magnets, and other applications where a magnetic black powder is needed.
Product Specifications
| Chemical Name | Magnetite |
| Mesh Size | 325 |
| Appearance | Black Powder |
| Source | Natural (mined) |
Applications and Benefits:
- Used as a black pigment in various applications.
- Essential for making magnets.
- Applicable in any process requiring a magnetic black powder.
Caution:
Handle with care. Avoid inhalation and contact with eyes or skin. Refer to the SDS for detailed safety instructions.
Silica Powder
Silica Powder is a finely ground form of silica that is commonly used in a variety of industrial applications. Our product is ground to a mesh size of 325, ensuring that it is finely ground and ready to use. our Silica Powder is a convenient and cost-effective option for those in need of this versatile material.
Product Specifications:
| Product Name | Silica Powder |
| Type | Ground Silica |
| Mesh Size | 325 |
Perfect for:
- Industrial manufacturers
- Construction companies
- Landscaping businesses
- Artists and craftsmen
- Science laboratories
- Engineering firms
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: This product contains silica powder and ground silica which may pose a hazard if inhaled. Use caution when handling and wear a protective mask.
Zinc Powder Micronized
Zinc Powder Micronized (Fine Zinc Metal Powder, Mesh 325) is a high-quality zinc metal powder that has been finely micronized for superior performance. This powder is ideal for a wide range of applications, including coatings, paints, and pigments. The fine mesh size of 325 ensures that the powder is easy to work with and provides excellent coverage and adhesion. Zinc Powder Micronized is a versatile and reliable product that is perfect for any project that requires a high-quality zinc powder.
Product Specifications:
| Product Name | Zinc Powder Micronized |
| Type | Fine Zinc Metal Powder |
| Mesh Size | 325 |
| Thickness | Powder |
| Form | Micronized |
| Material | Metal |
Similar Products
- Zinc Oxide Powder (Pure Pharmaceutical Grade)
- Zinc Dust (High Purity Zinc Metal Powder, Mesh 100)
- Zinc Stearate Powder (Fine White Powder, Lubricant and Release Agent)
- Zinc Sulfate Powder (Fertilizer and Animal Feed Additive)
- Zinc Chloride Powder (Flux and Wood Preservative)
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: This product may be hazardous if ingested or inhaled. Avoid contact with eyes and skin. Use protective equipment when handling. Keep out of reach of children.
Perfect for:
- Manufacturers of metal coatings and paints
- Pharmaceutical companies producing zinc-based supplements
- Cosmetic companies creating zinc-infused skincare products
- Research and development teams studying the properties of zinc
- Industrial companies using zinc powder in the production of alloys
- Jewelry makers utilizing zinc powder in the creation of metal jewelry
Ferric Oxide, Iron (III) Oxide
Ferric Oxide, also known as Iron (III) Oxide, is a fine powder with a mesh size of 325 and a purity of 99.2% on a metal basis. It is a red iron oxide that is commonly used as a pigment for cement, concrete, stucco, ceramic, glass, and exterior paint. Additionally, it can also be used as a source of iron for plants.
HS Code: 28211010
Please note that large quantities are only shipped by ground/truck.
Key Features:
- Fine powder mesh 325
- Purity of 99.2% (metal basis)
- Used as a pigment for cement, concrete, stucco, ceramic, glass, and exterior paint
- Can be used as a source of iron for plants
Product Specifications:
| Product Name: | Ferric Oxide, Iron (III) Oxide |
| Mesh Size: | 325 |
| Purity: | 99.2% (metal basis) |
Similar Products:
- Iron Oxide Yellow
- Iron Oxide Black
- Iron Oxide Brown
- Titanium Dioxide
- Carbon Black
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: Follow the manufacturer's instructions for proper use and disposal of this product.
Perfect for construction and manufacturing applications that require a red iron oxide pigment.
- 1