Advanced Search Results
Refine your search by using the category filter.
High-density spherical bronze for specialized industrial applications.
High-purity, high-density spherical copper powder for enhanced conductivity and versatility.
Steel Powder, Iron Powder, 250 Micron
Coarse steel powder (S100N) is produced from recycled black steel (construction steel) with improved features like dust-free, equal-size, and mostly spherical particles. It demonstrates strong magnetic attraction, has a high flow rate for dispensing from shakers, and is free from organic impurities such as cutting oil. This product is ideal for educational and industrial applications, including magnetism experiments, rust effect creation, and as a plant nutrient for iron supplementation.
Specifications
| Product Type | Recycled Black Steel (Construction Steel) |
| Particle Size | 250 Micron |
| Special Features | Dust-free, Spherical Particles, High Flow Rate |
| Magnetic Properties | Strong Magnetic Attraction |
| Organic Impurities | None |
| Carbon (C) | 0.8% - 1.2% |
| Manganese (Mn) | 0.35% - 1.2% |
| Silicon (Si) | 0.4% Minimum |
| Sulfur (S) | 0.05% Maximum |
| Phosphorus (P) | 0.05% Maximum |
Applications and Benefits:
- Used as iron filings for magnetism and electromagnetism experiments
- Preferred for educational use due to cleanliness and contamination-free particles
- Creates rust effects in sculptures, concrete, and structures
- Serves as a plant nutrient for iron supplementation
- High flow rate makes it suitable for dispensing from shakers
Caution:
This product may rust over time due to its recycled steel composition. Handle with care and review the Material Safety Data Sheet (MSDS) for safety precautions.
Axle Rod, 3 Mm X 75 Mm 100 Pack
Looking for a reliable and versatile solution for your plastic wheel needs? Look no further than our Axle Rods, 3 Mm X 75 Mm, Pack Of 100. These axle rods are specifically designed to fit snugly in plastic wheels made in Europe and Asia with a 2.9mm hole, including popular brands like Miniscience.
But that's not all - these axle rods are also perfect for use with plastic gears and small front wheels, such as those found in solar car kits. With a diameter of 3mm and a length of 75mm, these axle rods fit perfectly in wheels or gears with a 3mm bore, without the need for additional fillers or glue.
Available in packs of 100 or 1000, our Axle Rods are a must-have for manufacturers and producers of technology training kits. And if you're producing your own plastic or wooden wheels, don't forget to consider the flexibility of your materials and make the hole smaller as needed to avoid the need for glue or fillers.
Order your pack of 100 Axle Rods today and experience the convenience and reliability that they bring to your plastic wheel needs!
Key Features:
- Pack of 100 axle rods with 3mm diameter
- Fits snugly in plastic wheels made in Europe and Asia
- No need for additional fillers or glue
- 75mm long
- Available in packs of 100 and 1000
- Nominal diameter of 3mm for European and Asian plastic wheels
Product Specifications:
| Product Name: | Axle Rod, 3 Mm X 75 Mm, Pack Of 100 |
| Diameter: | 3 mm |
| Length: | 75 mm |
| Compatibility: | Plastic wheels made in Europe and Asia with a 2.9 mm hole diameter, Miniscience brand gear-wheel, plastic gears and small front wheels such as those used in solar car kit. |
| Additional Requirements: | No need for additional fillers or glue if used with wheels or gears with 3 mm bore diameter. |
| Pack Size: | Available in packs of 100 and 1000. |
Similar Products
- Wheel Axle Rod, 3 Mm X 75 Mm, Pack Of 50
- Plastic Wheel Axle, 3 Mm X 80 Mm, Pack Of 100
- Miniature Axle Rod, 2 Mm X 50 Mm, Pack Of 200
- Steel Axle Shaft, 4 Mm X 100 Mm, Pack Of 50
- Wooden Dowel Rod, 3 Mm X 75 Mm, Pack Of 150
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Note: When producing your own plastic or wooden wheels, please make sure to consider the flexibility of your materials and make the hole smaller as needed to avoid the need for glue or fillers. The actual diameter of the hole in European and Asian plastic wheels is 2.9 millimeters, so please be cautious when using 3 mm axle rods to ensure a snug fit.
Perfect for:
- Manufacturers and producers of technology training kits
- Individuals or companies producing plastic or wooden wheels
- Consumers looking for axle rods with 3-mm diameter to fit snugly in plastic wheels made in Europe and Asia
- Users of miniscience brand gear-wheel, plastic gears, and small front wheels such as those used in solar car kit
- Customers who want to avoid using additional fillers or glue
Ball And Ring, Demonstrating Thermal Expansion Chain
The Ball And Ring demonstrator is a unique product that showcases thermal expansion and chain reactions, helping students understand the concept of thermal expansion by demonstrating the expansion of the ball and ring when heated. The chain expansion is also demonstrated by the expansion of the chain that connects the ball and ring. This product is for educational purposes and can be used in classrooms, labs, or at home, providing an interactive and engaging way to learn about physics and STEM concepts.
Product Specifications
| Product Name | Ball And Ring |
| Demonstrates | Thermal Expansion, Chain Expansion |
| Materials | Brass (Ball and Ring), Steel (Chain) |
| Ball Diameter | 20 mm |
| Ring Inner Diameter | 30 mm |
| Weight | 185 gr |
| Packaging | Individual packaging |
Applications and Benefits
- For educational purposes, such as classrooms, labs, or at home, providing an interactive and engaging way to learn about physics and STEM concepts
- Helps students understand physics and STEM concepts, including thermal expansion, chain reactions, and heat transfer
- for science teachers, students studying thermal expansion, physics enthusiasts, STEM educators, science museums, science centers, and home-schooling parents
Key Features and Benefits
- Demonstrates thermal expansion and chain reactions, providing a unique and interactive way to learn about physics and STEM concepts
- Compact and easy to use, making it for classrooms, labs, or at home
- Made of durable materials, including brass and steel, ensuring longevity and reliability
Caution:
This product involves heat. Please follow safety instructions carefully and use with adult supervision.
Bronze Powder, Spherical, Light
Prealloyed high-density spherical bronze powder is designed for specialized applications such as flame-spraying, brazing, strip bearings, metal-bonded grinding wheels, cutting tools, and metal injection molding (MIM). It is also suitable for resin-bonded friction components, decorative cold casting, surface engineering, filters, and hydraulic seals.
Product Specifications
| Chemical Composition | Copper: 89.7% Tin: 10% Phosphorous: 0.3% |
| Apparent Density | 5 g/cc |
| Particle Shape | Spherical |
| Sieve Analysis (% Weight) | +100 mesh: 0% -100/+140: 0% -140/+200: 0.1% -200/+325: 2.8% -325: 97.1% |
Applications and Benefits:
- Flame-spraying applications
- Brazing and welding materials
- Strip bearings
- Metal-bonded grinding wheels
- Cutting tools
- Metal injection molding (MIM)
- Decorative applications, including cold casting
- Resin-bonded friction components
- Surface engineering
- Filters and hydraulic seals
Caution:
Handle with care and follow safety guidelines as detailed in the SDS. Ensure suitability for the intended application before use.
Carbonyl Iron Powder (CIPMS)
CIPMS is Carbonyl Iron Powder, a zero valent iron powder in the form of microspheres with particle sizes ranging from 3 to 10 microns. Manufactured using advanced technology, it achieves an exceptional purity of 99.5% or more. This fine iron powder exhibits outstanding magnetization behavior, making it ideal for diverse applications such as metal injection molding, inductive electronic components, microwave absorption, magnetic ink, and magnetic plastic parts.
Product Specifications
| Iron (Fe) | 97.8% - 99.5% |
| Carbon (C max) | 0.75 - 0.90% |
| Nitrogen (N max) | 0.65 - 0.90% |
| Oxygen (O max) | 0.15 - 0.40% |
| d10 (Particle Size) | 1.7 - 2.7 Micron |
| d50 (Particle Size) | 3.9 - 5.2 Micron |
| d90 (Particle Size) | 7.2 - 9.2 Micron |
Applications and Benefits:
- Metal injection molding
- Inductive electronic components
- Microwave absorption materials
- Magnetic inks and plastics
- Advanced magnetization applications
Caution:
Limited quantity product. Ships only to the US lower 48 states and Canada. No COA is available for this product. Handle and use according to safety guidelines provided in the SDS.
CIRON, Cast Iron Powder
Cast iron powder is used in the production of specialty alloys and as a key ingredient in pyrotechnic mixtures. Its granulation and composition make it suitable for various industrial applications, including metal manufacturing and fireworks production.
Product Specifications
| Metallic Iron | 90% |
| Total Carbon | 2.85% |
| Manganese | <1.0% |
| Silicon | <3.0% |
| Chromium | <1.0% |
| Granulation | 95–100% passing 20 mesh; 1% max passing 100 mesh |
Applications and Benefits:
- Manufacturing of specialty alloys
- Ingredient in pyrotechnic mixtures
- High carbon content for advanced metallurgy
- Granulated for precision industrial applications
Caution:
Handle with care. Avoid inhalation or ingestion. Refer to the SDS for detailed safety guidelines.
Cast Iron Powder, Thermal Spray
Cast iron powder used in the manufacturing of specialty alloys and as an ingredient in pyrotechnic mixtures. Also suitable for thermal spray applications, with recommendations to consider S1001 and S145C for such purposes. Engineered for industrial use with high metallic iron content and controlled granulation.
Product Specifications
| Metallic Iron | >90% |
| Total Carbon | 2.85% |
| Manganese | <1.0% |
| Silicon | <3.0% |
| Chromium | <1.0% |
| Granulation | Passing 20 mesh: 95-100%, Passing 100 mesh: 1% Max. |
Applications and Benefits:
- Manufacturing of specialty alloys
- Ingredient in pyrotechnic mixtures
- Thermal spray applications
- High iron content for industrial use
- Controlled granulation for specific needs
Caution:
Evaluate product suitability before large-scale use. For thermal spray applications, also consider S1001 and S145C. Store in a dry, cool place to maintain granulation and performance.
Copper Electrode, Flat, Copper Anode, One Piece
This flat copper anode electrode offers 99.9% pure copper in a compact 19 mm × 125 mm (3/4 × 5 in) format. Stamped with “Cu” for clear identification, the one‑piece construction provides consistent electrical conductivity for a wide range of laboratory experiments. Each unit is individually packaged for convenience and protection.
Product Specifications
| Material | Copper (Cu) |
| Purity | 99.9% |
| Shape | Flat – 19mm x 125mm (3/4 x 5 inches) |
| Identification | Stamped "Cu" |
| Weight | 18g |
| Electrical Conductivity | High (consistent with 99.9% pure copper) |
| Model/Part Number | CUFLAT |
| Packaging | Individual |
Applications and Benefits:
- Science experiments and educational demonstrations
- Physics and chemistry laboratory procedures
- Electrochemical cell anodes
- Metal conductivity testing
Key Features and Benefits
- 99.9% pure copper for conductivity
- Flat form factor (19mm × 125mm) for easy handling
- Stamped “Cu” for clear material identification
- One‑piece construction eliminates seams and joints
- High electrical conductivity suitable for precise measurements
- Durable metal suitable for repeated experimental use
- Individual packaging for convenience and protection
- Weight: 18g
Caution:
Metal electrodes have sharp edges; handle with care to avoid injury.
Copper Granules, 16 Mesh (Coarse Copper Powder)
Coarse copper powder composed of high-purity metallic copper. Particles are solid, nearly uniform in size, and feature the appearance of metallic spherical crystals. Recommended for wood inlay, art projects, and industrial applications where solid round multi-sided balls are suitable. In laboratory settings, granular copper is utilized for sulfur removal from environmental samples. CAS No.: 7440-50-8.
Product Specifications
| Mesh Size | 16 |
| Material | High-purity Copper |
| Particle Shape | Spherical, metallic crystals |
| CAS Number | 7440-50-8 |
Applications and Benefits:
- Wood inlay projects
- Artistic applications
- Industrial processes
- Laboratory sulfur removal from environmental samples
Caution:
Store in a dry and cool environment to maintain material integrity. Handle with appropriate protective measures to avoid direct contact. Ensure compatibility with intended applications before use.
Copper Granules, 35 Mesh (Coarse Copper Powder)
Coarse copper powder made of solid metallic high-purity copper metal. Particles are nearly equal in size, appearing as metallic spherical crystals. Recommended for wood inlay, art, and industrial applications requiring solid round multi-side balls. Granular copper is also used in laboratories for sulfur removal from environmental samples. Coarse 35 mesh size, with granules approximately 0.5 mm in diameter.
Product Specifications
| Mesh Size | 35 mesh |
| Granule Diameter | Approximately 0.5 mm |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Wood inlay projects
- Artistic applications
- Industrial uses requiring solid multi-side balls
- Sulfur removal from environmental samples in laboratories
Caution:
Handle with appropriate safety measures. Refer to the SDS for detailed safety guidelines.
Copper Granules, Mesh 20 (Coarse Copper Powder)
Coarse copper powder made of solid metallic high-purity copper metal. Particles are nearly equal in size, appearing as metallic spherical crystals. Recommended for wood inlay, art, and industrial applications requiring solid round multi-side balls. Granular copper is also used in laboratories for sulfur removal from environmental samples.
Product Specifications
| Copper | 99.84% |
| Apparent Density | 5.29 g/cc |
| Sieve Analysis (Typical) | +20 mesh: 0% -20/+30 mesh: 100% -30/+40 mesh: 0.0% -40 mesh: 0.0% |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Wood inlay projects
- Artistic applications
- Industrial uses requiring solid multi-side balls
- Sulfur removal from environmental samples in laboratories
Caution:
Handle with appropriate safety measures. Refer to the SDS for detailed safety guidelines.
Copper Powder 99+%, Mesh 200
High-purity copper powder made via water atomization and hydrogen reduction. Features very fine, irregular particles and clusters with relatively lower density. Recommended for applications requiring high purity and conductivity, including diamond wheels, sintering, and chemical reactions. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will conduct when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.3% |
| Hydrogen Loss | 0.39% |
| Apparent Density | 2.6 - 2.8 g/cc |
| Mesh Size | 200 mesh |
| Sieve Analysis |
+100 Mesh: Trace +140 Mesh: 1% Max +200 Mesh: 3% Max +325 Mesh: Balance -325 Mesh: 90% Min |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Conductive inks, paints, and pastes
- Injection molding
- Thermal management
- EDM electrodes
- Antifouling paints
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
- Diamond wheels
- Chemical reactions
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder 99.3%, General Purpose, 150 Mesh
The most popular and widely used copper powder, produced by the water atomization method followed by hydrogen reduction. This general-purpose copper powder has diverse applications, including the production of copper compounds, use as a catalyst in chemical formulations, abrasive wheels, carbon brushes, and more. It is important to note that pure copper powders may not exhibit continuity or conductivity under low-voltage multimeter tests due to air gaps and weak particle contacts but will show conductivity under higher voltage, when compacted, or mixed with oils/resins to form a paste.
Product Specifications
| Purity | 99.3% |
| Apparent Density | 2.7 g/cc |
| Nominal Mesh | -140 |
| -325 Mesh Ratio | > 50% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Production of copper compounds
- Catalyst in chemical formulations
- Abrasive wheels
- Carbon brushes
- Electronics and electrical applications
- Decorative and protective coatings
- Brazing and general-purpose industrial use
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder 99.3%, Mesh 325
Ultra-fine, high-purity copper powder made via water atomization and hydrogen reduction. Features spheroidal particles and clusters, offering higher conductivity and lower density. Suitable for metal injection molding and applications requiring high conductivity and purity. Typical applications include conductive inks, paints, pastes, thermal sprays, and sintered products. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will show conductivity when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.31% |
| Hydrogen Loss | 0.39% |
| Apparent Density | 2.97 g/cc |
| Mesh Size | 325 mesh |
| Sieve Analysis |
+60 Mesh: 0% -60/+80 Mesh: 0% -80/+100 Mesh: 0% -100/+140 Mesh: Trace -140/+200 Mesh: Trace -200/+325 Mesh: 0.6% -325 Mesh: 99.4% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Conductive inks, paints, and pastes
- Injection molding
- Thermal management
- EDM electrodes
- Antifouling paints
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder 99.5% - 99.9%
Ultra-fine, very high purity copper powder made via air atomization and hydrogen reduction. Features spherical particles with high conductivity and density. Recommended for diverse applications, including thick and thin film pastes, capacitor chips, end cap terminators, and thermal sprays. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will show conductivity when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.81% |
| Iron | 0.01% |
| Hydrogen Loss | 0.18% |
| Apparent Density | 4.89 g/cc |
| Sieve Analysis | +200 Mesh: 0% -200/+325 Mesh: 4.8% -325 Mesh: 95.2% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Capacitor chips
- End cap terminators
- Conductive inks, paints, and pastes
- Injection molding
- Electronics
- Thermal management
- EDM electrodes
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder 99.8%, Electronic Grade, Mesh 325
Electronic grade, high-purity copper powder made via water atomization and hydrogen reduction. Features ultra-fine, spheroidal particles with high conductivity and low density. Recommended for a variety of applications where conductivity is crucial, including thick and thin film pastes, capacitor chips, and thermal sprays. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will conduct when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.85% |
| Hydrogen Loss | 0.19% |
| Apparent Density | 2.97 g/cc |
| Mesh Size | 325 mesh |
| Sieve Analysis | +60 Mesh: 0% -60/+80 Mesh: 0% -80/+100 Mesh: 0% -100/+140 Mesh: Trace -140/+200 Mesh: Trace -200/+325 Mesh: 0.6% -325 Mesh: 99.4% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Capacitor chips
- End cap terminators
- Conductive inks, paints, and pastes
- Injection molding
- Electronics
- Thermal management
- EDM electrodes
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder > 99% (150 - 325 Mesh)
General-purpose, highly pure (>99%) copper powder made from electrolytic copper. Granular copper with a mesh size of 150 - 325. Known for its excellent electrical and thermal conductivities, this product finds use in the electrical and electronic industries. Additional applications include self-lubricating bearings, brazing, cold soldering, and mechanical plating. It is also used for antifouling paints, decorative and protective coatings, printing inks, medals, medallions, metal-plastic decorative products, and various chemical and medical purposes.
Product Specifications
| Purity | >99% |
| Mesh Size | 150 - 325 |
| Screen Analysis |
+60: 0.0% -60/+100: 0.7% -100/+200: 89.7% -200/+325: 9.1% -325: 0.5% |
Applications and Benefits:
- Electrical and electronic applications
- Self-lubricating bearings
- Brazing and cold soldering
- Mechanical plating
- Antifouling paints and decorative coatings
- Printing inks
- Medals, medallions, and metal-plastic decorative products
- Chemical and medical purposes
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
CU264: Copper Powder, 99.5%, Mesh 100
High purity copper powder, nominal mesh 100, Apparent density: 2.6 g/cc, Copper > 99.5%, with irregular shape particles. Used in powder metallurgy. May be admixed with other metal powders and graphite for specific properties such as strength, hardness and wear resistance for structural parts.
HTS Code: 7406.10.0000
NMFC: 30743
CAS: 7440-50-8
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features
- High Purity Copper (>99.5%)
- Nominal Mesh 100 for fine granularity
- Irregular particle shape for diverse uses
- Compatible with other metals and graphite
- Conductivity with higher voltage or when compacted
Product Specifications
| Apparent Density | 2.6 g/cc |
| Purity | > 99.5% Copper |
| Particle Shape | Irregular |
| Conductivity | At higher voltages/when compacted |
| Applications | Powder Metallurgy, Alloys |
Similar Products
- High purity bronze powder, metallurgy
- Fine granular aluminum powder, industrial
- Nickel powder, high density, 99% purity
- Spherical zinc powder, corrosion-resistant
- Iron powder, magnetic, for alloys
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Metallurgists, Industrial Manufacturers, Material Scientists, Engineering Students, Research and Development Labs
For MSDS Go to Downloads TabCU118SP Copper Powder, Fine, Spherical
Our specification guarantees that at least 80% of this powder are particles smaller than 44 micron. A typical analysis however shows that 88% of particles are smaller than 44 micron. Most particles are between 16 micron and 28 micron.
Applications include cold casting, 3-D printer filaments, metal clay, sintering, Green/ blue patina and rust effect, preventing mold in concrete, plaster,dry-wall, paint, adhesives and grout.
Also used in 3D printing process known as Selective Powder Deposition (SPD)
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features:
- High-purity, high-density spherical copper powder
- Provides high heat conductivity and electrical conductivity
- Suitable for various applications, including cold casting, 3-D printer filaments, metal clay, sintering, green/blue patina and rust effect, preventing mold in concrete, plaster, dry-wall, paint, adhesives, and grout
- Used in the 3D printing process known as Selective Powder Deposition (SPD)
- Particle size distribution with 88% of particles smaller than 44 micron
Product Specifications:
| Copper Purity | Over 99.5% |
| Hydrogen Loss | Less than 0.7% |
| Apparent Density | 4.5-5.5 g/cc |
| Typical Analysis | Copper > 99.5% Hydrogen Loss < 0.7% Apparent Density, g/cc: 4.5 - 5.5 Passing mesh 325 (44 micron): 80% ~ 88% |
Similar Products:
- Ultra-Fine Copper Powder
- High-Purity Copper Foil
- Copper Wire
- Copper Rod
- Copper Sheet
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for enhanced conductivity and versatility applications, including cold casting, 3-D printing, metal clay, and more.
For MSDS ClickCU7005F Copper Powder
Copper Powder offers exceptional metallic shine, ideal for metallic inks and paints. Compatible with most resins and conductive for ink creation.
For more details, visit the CU7005F product data sheet.
Key Features
- Exceptional metallic shine
- Art-grade pigment quality
- Compatible with various resins
- Usable with drying oils like linseed
- Enables creation of conductive inks
Product Specifications
| Type | Copper Powder |
| Use | Metallic Inks, Paints |
| Compatibility | Polyurethane, Polyacrylic, Polyester |
| Conductivity | Suitable for Conductive Inks |
| Pigment Quality | Art Grade |
Similar Products
- Metallic-shine gold powder for inks
- Silver pigment powder, art-grade
- Bronze powder, resin-compatible
- Reflective aluminum powder, versatile
- Artistic brass powder for painting
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Artists, Paint Manufacturers, and DIY Craft Enthusiasts