Advanced Search Results
Refine your search by using the category filter.
High-purity, high-density spherical copper powder for enhanced conductivity and versatility.
Chelating agent for industrial, agricultural, and personal care applications.
Fast chemical reactions, hydrogen gas production, wood stains, iron-based chemicals.
Fine-grade iron powder for chemical, filler, and magnetic applications.
For MSDS Go to Downloads TabCU118SP Copper Powder, Fine, Spherical
Our specification guarantees that at least 80% of this powder are particles smaller than 44 micron. A typical analysis however shows that 88% of particles are smaller than 44 micron. Most particles are between 16 micron and 28 micron.
Applications include cold casting, 3-D printer filaments, metal clay, sintering, Green/ blue patina and rust effect, preventing mold in concrete, plaster,dry-wall, paint, adhesives and grout.
Also used in 3D printing process known as Selective Powder Deposition (SPD)
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features:
- High-purity, high-density spherical copper powder
- Provides high heat conductivity and electrical conductivity
- Suitable for various applications, including cold casting, 3-D printer filaments, metal clay, sintering, green/blue patina and rust effect, preventing mold in concrete, plaster, dry-wall, paint, adhesives, and grout
- Used in the 3D printing process known as Selective Powder Deposition (SPD)
- Particle size distribution with 88% of particles smaller than 44 micron
Product Specifications:
| Copper Purity | Over 99.5% |
| Hydrogen Loss | Less than 0.7% |
| Apparent Density | 4.5-5.5 g/cc |
| Typical Analysis | Copper > 99.5% Hydrogen Loss < 0.7% Apparent Density, g/cc: 4.5 - 5.5 Passing mesh 325 (44 micron): 80% ~ 88% |
Similar Products:
- Ultra-Fine Copper Powder
- High-Purity Copper Foil
- Copper Wire
- Copper Rod
- Copper Sheet
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for enhanced conductivity and versatility applications, including cold casting, 3-D printing, metal clay, and more.
For MSDS ClickCU7005F Copper Powder
Copper Powder offers exceptional metallic shine, ideal for metallic inks and paints. Compatible with most resins and conductive for ink creation.
For more details, visit the CU7005F product data sheet.
Key Features
- Exceptional metallic shine
- Art-grade pigment quality
- Compatible with various resins
- Usable with drying oils like linseed
- Enables creation of conductive inks
Product Specifications
| Type | Copper Powder |
| Use | Metallic Inks, Paints |
| Compatibility | Polyurethane, Polyacrylic, Polyester |
| Conductivity | Suitable for Conductive Inks |
| Pigment Quality | Art Grade |
Similar Products
- Metallic-shine gold powder for inks
- Silver pigment powder, art-grade
- Bronze powder, resin-compatible
- Reflective aluminum powder, versatile
- Artistic brass powder for painting
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Artists, Paint Manufacturers, and DIY Craft Enthusiasts
Copper Powder CU112SP
CU112SP is a super fine, high density, high purity spherical copper powder that provides high heat conductivity and electrical conductivity properties to your products.
Our specification guarantees that at least 95% of this powder are particles smaller than 44 micron. A typical analysis however shows that 99.9% of particles are smaller than 44 micron. Most particles are between 10 micron and 22 micron.
HTS Code: 7406.10.0000.
NMFC: 30743
CAS: 7440-50-8
Applications include cold casting, 3-D printer filaments, metal clay, sintering, Green/ blue patina and rust effect, preventing mold in concrete, plaster,dry-wall, paint, adhesives and grout.
Also used in 3D printing process known as Selective Powder Deposition (SPD)
Old product code: CU155A
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features
- Super fine, spherical particles
- High density and purity
- Excellent thermal and electrical conductivity
- Consistent particle size distribution
- Versatile applications in industry and art
Product Specifications
| Particle Size | 95% < 44 microns |
| Purity | > 99.2% Copper |
| Apparent Density | 4.5 - 5.5 g/cc |
| Hydrogen Loss | < 0.7% |
| Mesh Passing | 99.9% through 325 (44 micron) |
Similar Products
- Fine silver powder, high conductivity
- Spherical bronze powder, 3D printing
- Fine aluminum powder, thermal conductivity
- High-purity zinc powder, corrosion resistance
- Spherical titanium powder, lightweight strength
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for 3D Printing Enthusiasts, Industrial Manufacturers, Electronics Professionals, Artists and Sculptors, Construction Material Suppliers
For MSDS Click or Go to Downloads TabHighly pure (>99%) electrolytic copper in a granular form, Copper Filings are versatile for various industrial, chemical, and artistic applications. Mesh 25 - 325 suitable for electrical and thermal conductivities.
Key Features
- Highly pure electrolytic copper
- Excellent electrical and thermal conductivities
- Versatile mesh size from 25 - 325
- Useful in a wide range of applications
- Effective for coatings, brazing, and soldering
Product Specifications
| Material | Copper >99% Purity |
| Mesh Size | 25 - 325 |
| Form | Granular Mixed Grain |
| Applications | Electrical, Mechanical, Decorative |
Similar Products
- High conductivity copper mesh
- Electrical grade copper pellets
- Thermal conductive copper strips
- Fine copper powder for coating
- Brazing grade copper granules
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Electrical Engineers, Industrial Manufacturers, Artists and Craftsmen, Chemical Technicians, Medical Equipment Manufacturers
Copper Sulfate, Pentahydrate, 99.9%
Copper Sulfate (Copper (II) Sulfate; Copper Sulphate; Cupric Sulfate; Blue Vitriol; Blue Stone, Blue Copperas) CuSO4.5H2O. High-purity grade, 99.9%.
Product Specifications
| CAS Number | 7758-99-8 (CuSO4.5H2O) |
| Grade | 99.9% High Purity |
Applications and Benefits:
- Electroplating
- Feed additive
- Germicides
- Textile mordant
- Leather industry
- Pigments
- Electric batteries
- Copper salts
- Wood preservative
- Agricultural use (soil additive, pesticides, fungicide)
Caution:
Toxic by ingestion. Strong irritant. Handle with care.
Copper Tube 24" Long, Od: 1/8" (3.1 Mm) Copper
These versatile copper tubes are perfect for industrial applications requiring high conductivity and resistance to corrosion. They are commonly used in induction heaters and for hot liquid transfer. The tube is 24" long with an outer diameter of 1/8" (3.1 mm), making it a convenient size for a variety of projects.
Key Features:
- High purity copper powder
- Largest grains in comparison to our other copper powder products
- Darker in color than our other copper powder products
Product Specifications:
| Purity | 99.87% |
| Hydrogen Loss | 0.21% |
| Apparent Density | 2.57g/cc |
| Sieve Analysis | Typical |
| 40 Mesh | 0% |
| -40/100 Mesh | 90.4% |
| -100/140 Mesh | 9% |
| -140 Mesh | 0.6% |
Similar Products
- Copper Tube 12" Long, Od: 1/4" (6.35 Mm)
- Copper Tube 36" Long, Od: 1/2" (12.7 Mm)
- Copper Coil 50' Long, Od: 3/8" (9.53 Mm)
- Copper Sheet 24" x 36", Thickness: 0.032" (0.81 Mm)
- Copper Wire 100' Long, Gauge: 14
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: Please refer to the Safety Data Sheet for Copper Powder before use.
Perfect for:
- Industrial applications
- Manufacturing processes
- Research and development
The target audience for this product is individuals or companies involved in industrial applications, manufacturing processes, and research and development. They are likely to have a technical background and require high purity copper powder for their work. The language and tone of the description should be informative and technical, providing detailed information about the product specifications and key features. It should also highlight the product's versatility and potential applications in various industries.
Copper Tube 36" Long, Od: 3/16" (4.8 Mm)
Copper Tube 36" Long, Od: 3/16" (4.8 Mm) is a versatile copper tube that can be used in a variety of heating applications. These tubes are perfect for making induction heaters, Buzz-wire game projects, water heaters, and for the transfer of hot gases or liquids.
Available in 3 different lengths and thicknesses, copper tubes are a reliable and durable option for any heating project.
Key Features:
- 36" long copper tube
- Outer diameter of 3/16" (4.8 mm)
- Versatile for various heating applications
- Suitable for use in induction heaters, Buzz-wire game project, water heaters, and transfer of hot gases or liquids
- Available in 3 different lengths and thicknesses
- High-quality copper material ensures durability and longevity
Product Specifications:
| Product Name: | Copper Tube 36" Long, Od: 3/16" (4.8 Mm) |
| Length: | 36 inches |
| Outer Diameter: | 3/16" (4.8 mm) |
| Material: | Copper |
| Common Uses: | Induction heaters, Buzz-wire game project, water heaters, transfer of hot gases or liquids |
Similar Products
- Brass Tube 36" Long, OD: 1/4" (6.35 mm) - Ideal for plumbing and decorative purposes.
- Aluminum Tube 36" Long, OD: 1/2" (12.7 mm) - Lightweight and corrosion-resistant, perfect for HVAC systems.
- Stainless Steel Tube 36" Long, OD: 3/8" (9.53 mm) - Durable and heat-resistant, suitable for high-pressure and high-temperature applications.
- PVC Tube 36" Long, OD: 1" (25.4 mm) - Non-corrosive and easy to install, great for water and drainage systems.
- Titanium Tube 36" Long, OD: 1/8" (3.17 mm) - Strong and lightweight, ideal for aerospace and marine applications.
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: Copper tubes may conduct electricity and should not be used in electrical applications. Use appropriate safety measures when handling hot gases or liquids.
Perfect for:
- DIY enthusiasts who want to create their own induction heaters or Buzz-wire game projects
- Plumbers and HVAC technicians who need copper tubes for water heaters and transfer of hot gases or liquids
- Manufacturers who require copper tubes for their heating applications
- Students and educators who want to teach or learn about the properties and uses of copper tubes
- Homeowners who want to upgrade their heating systems with high-quality copper tubes
- Construction professionals who need copper tubes for their building projects
Copper Tube 48" Long, O.D.: 1/4" (6.2 Mm)
Upgrade your projects with copper tubes for hot liquid transfer. These reliable copper tubes can be used in various applications such as induction heaters, Buzz-wire game projects, water heaters, and transfer of hot gases or liquids. The copper tube is 48 inches long and has an outer diameter of 1/4 inch (6.2 mm).
Key Features
- Reliable copper tubes
- Suitable for hot liquid transfer
- Can be used in various applications
Product Specifications:
| Length | 48 inches |
| Outer Diameter | 1/4 inch (6.2 mm) |
Similar Products
- Copper Tube 36" Long, O.D.: 1/4" (6.2 Mm)
- Copper Tube 60" Long, O.D.: 1/4" (6.2 Mm)
- Copper Tube 48" Long, O.D.: 3/8" (9.5 Mm)
- Copper Tube 48" Long, O.D.: 1/2" (12.7 Mm)
- Copper Tube 48" Long, O.D.: 5/8" (15.9 Mm)
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for: DIY enthusiasts and professionals looking for reliable copper tubes for hot liquid transfer.
CAUTION: Handle with care when using copper tubes for hot liquid transfer to avoid burns or scalds.
For MSDS Go to Downloads TabSafety Data Sheet for Copper Powder
CU41, Copper Powder, Mesh 40 (Coarse)
High purity atomized copper powder -40/ 100 US Mesh has the largest grains compared with our other copper powder products. It is also usually darker in color. Minimum purity: 99.0%. Typical Apparent Density: 2.4. Nominal Mesh: -40/ 100. HTS Code: 7406.10.0000. NMFC: 30743. CAS: 7440-50-8. Typical Analysis: Copper: 99.87%, Hydrogen Loss: 0.21%, Apparent Density: 2.57 g/cc. Sieve Analysis: 40 mesh 0%, -40/ 100 mesh 90.4%, -100/ 140 mesh 9%, -140 mesh 0.6%.
Key Features
- High purity, minimum 99.0%
- Coarse grain size, -40/ 100 US Mesh
- Dark color, distinct appearance
- Apparent Density: 2.57 g/cc
- Comprehensive sieve analysis included
Product Specifications
| Purity | 99.87% |
| Hydrogen Loss | 0.21% |
| Apparent Density | 2.57 g/cc |
| Mesh Size | >40 mesh 0% -40/ 100 mesh 90.4% -100/ 140 mesh 9% -140 mesh 0.6% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS Number | 7440-50-8 |
Similar Products
- Fine grain, 99% pure copper powder
- Medium grain, dark copper powder
- High-density, fine copper powder
- Coarse, 98% pure copper flakes
- Atomized, spherical copper granules
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Industrial Manufacturers, Metal Fabrication Professionals, Chemical Industry Experts, Research and Development Teams, Specialty Alloy Producers
Density Cubes, Metals Copper
These high-density copper cubes are for comparison and experimentation, available in 10mm or 20mm sizes, machined and made from copper material.
Product Specifications
| Material | Copper |
| Density | 8.96 g/cm3 |
| Size Options | 10mm or 20mm |
| Weight | Varies by size |
| Package Dimensions | 20 x 20 mm |
| Package Weight | 0.155 lb |
| Units per Package | 1 |
Applications and Benefits:
- Science enthusiasts
- Students studying density and material properties
- Teachers looking for hands-on classroom activities
- Researchers in materials science and engineering
Key Features and Benefits
- High-density copper material
- machined for accurate measurements
- Reusable transparent plastic case for storage
Caution:
High-density copper cubes may be hazardous if mishandled. Please use caution when handling and keep out of reach of children.
Ethylenediaminetetraacetic Acid (EDTA)
Ethylenediaminetetraacetic acid (EDTA) is a white odorless crystalline powder used as chelating agent in pulp & paper, cleaning, chemical processing, agriculture and water treatment.
Acid EDTA also known as edetic acid, is an aminopolycarboxylic acid with the formula [CH2N(CH2CO2H)2]2. This white, water-soluble solid is widely used to bind to iron (Fe2+/Fe3+) and calcium ions (Ca2+), forming water-soluble complexes even at neutral pH. It is thus used to dissolve Fe- and Ca-containing scale as well as to deliver iron ions under conditions where its oxides are insoluble.
In Textiles and paper industry, EDTA is mainly used to sequester (bind or confine) metal ions in aqueous solution. In the textile industry, it prevents metal ion impurities from modifying colors of dyed products. In the pulp and paper industry, EDTA inhibits the ability of metal ions, especially Mn2+, from catalyzing the disproportionation of hydrogen peroxide, which is used in bleaching.
EDTA is added to some food as a preservative or stabilizer to prevent catalytic oxidative discoloration, which is catalyzed by metal ions.
EDTA can solubilize Fe3+ ions at or below near neutral pH. This property is useful in agriculture including hydroponics. However, given the pH dependence of ligand formation, EDTA is not helpful for improving iron solubility in above neutral soils. Otherwise, at near-neutral pH and above, iron(III) forms insoluble salts, which are less bioavailable to susceptible plant species.
EDTA is used extensively in the analysis of blood. It is an anticoagulant for blood samples for CBC/FBCs, where the EDTA chelates the calcium present in the blood specimen, arresting the coagulation process and preserving blood cell morphology.
In shampoos, cleaners, and other personal care products, EDTA salts are used as a sequestering agent to improve their stability in air.
Product Specifications
| CAS Number | 60-00-4 |
| Molecular Weight | 292.25 |
| Chemical Formula | C10H16O8N2 |
Applications:
- Pulp and paper: Sequesters metal ions to prevent discoloration
- Cleaning: Dissolves Fe- and Ca-containing scales
- Agriculture: Solubilizes Fe3+ ions in hydroponics
- Water treatment: Chelates metal ions
- Textile industry: Prevents metal ions from altering dye colors
- Food preservation: Stabilizes against oxidative discoloration
- Blood analysis: Anticoagulant in CBC/FBC tests
- Personal care: Enhances stability in shampoos and cleaners
Caution:
Ensure proper handling and usage as per the safety guidelines. Read the Safety Data Sheet before use.
Fine Iron Powder Acid Soluble
Fine Iron Powder is a high-quality, acid-soluble powder ideal for facilitating quick chemical reactions. Its versatility makes it an excellent choice for various applications, including the production of hydrogen gas, wood stains, Iron Sulfate (Ferrous Sulfate), and other iron-based chemicals. The powder exhibits exceptional solubility in diluted sulfuric acid, diluted hydrochloric acid, and diluted acetic acid (Vinegar), ensuring efficient reactions and desired outcomes.
Key Features:
- Facilitates quick chemical reactions
- Enables hydrogen gas production
- Ideal for wood stains
- Suitable for iron-based chemical production
- Highly soluble in diluted acids
Product Specifications:
| Specification | Details |
| Particle Size | Fine |
| Solubility | Acid Soluble |
| Applications | Chemical Reactions, Hydrogen Gas Production, Wood Stains, Iron-Based Chemicals |
Similar Products:
- Iron Filings for Chemical Reactions
- Iron Powder for Metallurgical Applications
- Fine Metal Powders for Industrial Use
- Iron Sulfate for Water Treatment
- Iron-Based Catalysts for Chemical Synthesis
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: If cautions, hazards, or warnings don't exist, this section will be hidden.
Perfect for chemists, chemical manufacturers, industrial researchers, and professionals seeking effective iron-based solutions.
Graphite Powder, Micronized Flake, 95+%
Micronized natural graphite is an electrically conductive powder that can produce metallic shine on skin and smooth surfaces. Particle size of about 5 micron and flake shape of particles allow you to apply this powder by brush or by foam to create a conductive surface or the metallic shine effect. GRPM5 is a natural graphite with more than 95% carbon content, ground to a fine powder with average particle size of about 5 micron.
Product Specifications
| Carbon Content | 95+% |
| Particle Size | 5 micron (average) |
| Apparent Density | 0.25 g/cc |
| CAS# Graphite | 7782-42-5 |
| CAS# Carbon | 7740-44-0 |
| SKU | GRPM5 |
Applications and Benefits:
- Lubrication (cold and hot)
- Lubricant pastes
- Conductive pastes
- Electroplating on plastics and non-conductive objects
- Powder metallurgy for alloy and sintering control
Caution:
The natural graphite may have impurities such as sulfur, quartz, mica, ash, and humidity.
High Purity Iron Powder for Seed Cleaning (300SC)
300SC is a fine, high-purity iron powder with spheroidal and irregular easy-flow particles, specifically designed for industrial seed cleaning applications. Qualified and tested for optimal performance in seed cleaning processes.
Product Specifications
| Iron Content | 99+% |
| Carbon | 0.00% |
| Oxygen | 0.05% |
| Sulfur | 0.006% |
| Phosphorus | 0.001% |
| Particle Size Distribution |
+200 Mesh (75 microns): Trace -200 +325 Mesh (45 microns): 3% -325 Mesh: Balance |
Applications and Benefits:
- Industrial seed cleaning applications
- Spheroidal particles for easy flow and efficiency
- High-purity material ensures effective performance
Additional Information:
Qualified for industrial seed cleaning use only. For further details, download the Safety Data Sheet.
Iron Powder, High Purity, Hydrogen Reduced
High-purity, hydrogen-reduced, highly reactive, fine iron powder with a high surface area. Suitable for chemical reactions, magnetism experiments, and making magnetic paints. All particles are 150 microns or smaller.
Product Specifications
| Iron Content | >98% |
| Acid Insolubility | 0.0031 |
| H2-Loss | 0.009 |
| Apparent Density (HALL) | 2.41 G/CC |
| Particle Size Distribution | +80 Mesh: Trace -80/+100 Mesh: 0.8% -100/+140 Mesh: 14.6% -140/+200 Mesh: 25.8% -200/+325 Mesh: 30.3% -325 Mesh: 28.5% |
| HTS Number | 7205.21.0000 |
| CAS Number | 7439-89-6 |
Applications and Benefits:
- Chemical reactions
- Magnetism experiments
- Making magnetic paints
Additional Information:
For further details, visit the following resources:
Iron Powder, Coarse, Mesh 20
IRON12 is a special coarse iron powder with a spongy flake structure, produced from high-purity iron ore by hydrogen reduction. It is ideal for ground remediation, permeable reactive barriers, and filtration of specific air or gas contaminants. Additionally, it serves as a high-purity iron source for chemical reactions. Apparent density ranges from 1 to 1.5 g/cc.
Product Specifications
| Particle Size | Mesh 20 |
| Apparent Density | 1 - 1.5 g/cc |
| Screen Analysis | +20 Mesh: Trace - 2.0% -20 +60 Mesh: 30.0% - 70.0% -60 +100 Mesh: 10.0% - 35.0% -325 Mesh: Up to 12% |
Applications and Benefits:
- Ground remediation
- Permeable reactive barriers
- Filtration of air or gas contaminants
- Source of high-purity iron for chemical reactions
Iron Powder, Micronized, Light
Micronized low-density iron powder is by far the finest grade of iron powder that has ever been made. It consists of irregular and flake particles as small as 5 microns. This product is an electronic grade high purity iron dust; however, very fine particles tend to oxidize easier. In most cases about 2 to 3 percent of this product is oxidized on the surface during the grinding and packaging process.
Product Specifications
| Particle Size | As small as 5 microns |
| Purity | High purity, electronic grade |
| Oxidation Rate | 2–3% surface oxidation during grinding/packaging |
Applications and Benefits:
- Chemical reactions
- Filler metals for plastic or epoxy compounds
- Mirror backing
- High-density P/M parts
- Carrier for photocopy toners
- Matrix metal for diamond bonding
- Ferromagnetic applications
- Fingerprinting powders
- Magnetic inks and paints
Caution:
Fine iron dust in air can form an explosive mixture. Avoid dust. Avoid inhalation. Use a mask and protective clothing while handling.
Iron Powder, Super Fine, Light
Super fine high-purity elemental iron powder with irregular, porous sponge-like particles. Manufactured using high-temperature metallurgical reduction processes with hydrogen gas. This powder is low density, non-flowing, and suitable for various applications.
Product Specifications
| Iron Content | >97.7% |
| Acid Insolubility | 0.90% |
| H2-Loss | 1.75% |
| Apparent Density (HALL) | Low <2.2 g/cm3 |
| Particle Size Distribution | -100 Mesh: 100% +200 Mesh: 0.1% +325 Mesh: 2.4% -325 Mesh: 97.5% |
| HTS Number | 7205.21.0000 |
| CAS Number | 7439-89-6 |
Applications and Benefits:
- Cold casting / resin casting
- Metal clay
- Magnetic pigment
- Fingerprinting powder
- Making magnetic paints
- Magnetic powder for tension control devices
Additional Information:
This product is no longer in production. Limited quantities available. Please consider IRON325AT or IRON325ZV for alternative solutions. For further details, visit:
Iron Powder, Ultra Pure 99.5%
High-purity fine iron powder made of high-purity iron by the water atomization method. Features an apparent density of >2.8 g/cc with a medium particle size distribution. Suitable for various applications requiring ultra-pure iron.
Product Specifications
| Apparent Density | 3 g/cc |
| HTS# | 7205.21.0000 |
| CAS# | 7439-89-6 |
| Sieve Analysis | +212 µm: 0% 180–212 µm: 2% 150–212 µm: 12% -45 µm: 10–30% |
Chemical Analysis (Typical)
| Fe | 99.5% |
| O-tot | 0.12% |
| C | 0.003% |
| S | 0.010% |
| P | 0.01% |
Applications and Benefits:
- High-purity requirements for industrial or scientific uses
- Applications requiring medium particle size distribution
- Water atomized iron suitable for precise manufacturing
Caution:
Handle in accordance with safety guidelines. Refer to SDS for details.
Lycopodium Powder
Lycopodium Powder, also known as Dragon's Breath Flash Powder, club moss spores, Lycopodium Clavatum, or vegetable sulfur, is a pale yellow, very lightweight fluffy powder that is commonly used for fire effects and dyeing. It has an apparent density of 0.6 g/ml - 0.68 g/ml and is often used by magicians to create a jet of fire just like a Dragon's Breath when squirted through an open flame. Additionally, woolen cloth boiled with lycopodium can become blue when dipped in a bath of Brazil wood. Please note that if this grade of Lycopodium is out of stock, we will ship you a superior grade with lower density at no extra cost to you.
Key Features
- Creates a jet of fire just like a Dragon's Breath when squirted through an open flame.
- Can be used for dyeing woolen cloth.
- Very lightweight and fluffy powder.
Product Specifications
| Color | Pale yellow |
| Apparent Density | 0.6 g/ml - 0.68 g/ml |
| Uses | Fire effects, dyeing woolen cloth |
Key Features:
- Creates a jet of fire just like a Dragon's Breath when squirted through an open flame.
- Can be used for dyeing woolen cloth.
- Very lightweight and fluffy powder.
Product Specifications:
| Color | Pale yellow |
| Apparent Density | 0.6 g/ml - 0.68 g/ml |
| Uses | Fire effects, dyeing woolen cloth |
Similar Products
- Dragon's Breath Flash Powder
- Club Moss Spores
- Vegetable Sulfur
- Flame Powder
- Fireworks Powder
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: Lycopodium Powder is commonly used for fire effects and should only be used by professionals with proper safety equipment and training. It should also be stored in a cool, dry place away from heat sources and open flames. Use caution when handling and keep out of reach of children.
Perfect for:
- Magicians looking to create fire effects
- Artists and crafters interested in dyeing woolen cloth
Lycopodium Powder
Looking to create a magical effect for your next performance? Look no further than Lycopodium Powder! This pale yellow, lightweight powder can be squirted through an open flame to create a jet of fire just like a Dragon's Breath. It's a favorite among magicians and performers looking to add a little extra flair to their act.
But that's not all Lycopodium Powder can do! It's also great for dyeing woolen cloth - simply boil the cloth with the powder and then dip it in a bath of Brazil wood for a beautiful blue color.
Our Lycopodium Powder has an apparent density of 0.6 g/ml - 0.68 g/ml and comes in a very lightweight, fluffy form. Please note that if this grade of Lycopodium is out of stock, we will ship you a superior grade with lower density at no extra cost to you.
Key Features
- Creates a jet of fire just like a Dragon's Breath when squirted through an open flame
- Can be used for dyeing woolen cloth
- Very lightweight and fluffy powder
Product Specifications
| Color | Pale yellow |
| Apparent Density | 0.6 g/ml - 0.68 g/ml |
| Uses | Fire effects, dyeing woolen cloth |
Perfect For
The target audience for Lycopodium Powder includes:
- Magicians and performers looking to add a special effect to their act
- Artists and crafters interested in dyeing woolen cloth
When describing the product, it's important to use language that appeals to these groups. For example, highlighting the product's ability to create a magical effect or its versatility in art projects.