Advanced Search Results
Refine your search by using the category filter.
Precision 50-mesh iron pellets for safe pyrotechnic and training rounds.
MicroShield Balanced Impact 50
MicroShield Balanced Impact 50 is crafted to deliver a controlled, safe balance of heat and dispersion for pyrotechnic and training purposes. Designed with 50 mesh-sized iron pellets, it provides non-lethal applications with optimized safety in controlled environments, ideal for training rounds and pyrotechnics. Composed of small, durable steel spheres approximately 0.1 mm in diameter, these pellets feature a low-carbon magnesium alloy, enhancing their durability while reducing the likelihood of unintended ignition. With an apparent density of 4.3 g/cc, this spherical steel powder is approximately 95% individual spheres, with the remaining particles being either spheroid or clusters of multiple spheres. Its uniform, dark gray color ensures easy identification, while its particle size ensures consistent performance for less-lethal use.
Key Features
- 50 mesh iron pellet size for optimal control
- Low carbon magnesium alloy for reduced ignition risk
- Approximately 95% spherical individual particles
- Dark gray color for easy visual identification
- Perfect balance of heat generation and particle dispersion
Product Specifications
| Material | Low carbon magnesium steel alloy |
| Mesh Size | 50 mesh |
| Average Particle Diameter | 0.1 mm |
| Apparent Density | 4.3 g/cc |
| Color | Dark gray |
| Application | Pyrotechnic & non-lethal training rounds |
Perfect for military trainers, pyrotechnic makers, and less-lethal ammunition suppliers.
utilizing iron particles at a 50 mesh size (approx. 0.297 mm). This configuration optimizes particle spread and retention of kinetic energy to create an effective and humane deterrent for birds over varying ranges. The 50 mesh iron particles offer an improved balance between energy retention and dispersion compared to finer powders, resulting in enhanced coverage without compromising safety.
These loads are structured across multiple shotgun gauges to suit diverse operational needs, whether for close-proximity deterrence or extended reach applications. To provide control over the spread and distance, each load type—light, standard, and heavy—uses calibrated powder charges, maintaining a wide dispersal pattern that maximizes effectiveness while minimizing the risk of harm. The table below details recommended specifications across different gauges:
Bird Deterrent Loads Using 50 Mesh Iron Particles Across Various Gauges
| Gauge | Load Type | Iron Particle Load | Powder Charge | Estimated Velocity | Effective Range |
|---|---|---|---|---|---|
| 12 Gauge | Light Deterrent | 20 g (0.71 oz) | 14-16 gr (0.32-0.37 oz) | 230-280 m/s (754-919 ft/s) | 10-20 meters (33-66 ft) |
| Standard Deterrent | 24 g (0.85 oz) | 16-18 gr (0.37-0.42 oz) | 280-330 m/s (919-1083 ft/s) | 20-30 meters (66-98 ft) | |
| Heavy Deterrent | 28 g (0.99 oz) | 18-20 gr (0.42-0.46 oz) | 330-380 m/s (1083-1247 ft/s) | 30-40 meters (98-131 ft) | |
| 16 Gauge | Light Deterrent | 15 g (0.53 oz) | 12-14 gr (0.27-0.32 oz) | 210-260 m/s (689-853 ft/s) | 10-20 meters (33-66 ft) |
| Standard Deterrent | 18 g (0.63 oz) | 14-16 gr (0.32-0.37 oz) | 260-310 m/s (853-1017 ft/s) | 20-30 meters (66-98 ft) | |
| Heavy Deterrent | 22 g (0.78 oz) | 16-18 gr (0.37-0.42 oz) | 300-350 m/s (984-1148 ft/s) | 30-40 meters (98-131 ft) | |
| 20 Gauge | Light Deterrent | 12 g (0.42 oz) | 10-12 gr (0.23-0.27 oz) | 200-250 m/s (656-820 ft/s) | 10-20 meters (33-66 ft) |
| Standard Deterrent | 15 g (0.53 oz) | 12-14 gr (0.27-0.32 oz) | 250-300 m/s (820-984 ft/s) | 20-30 meters (66-98 ft) | |
| Heavy Deterrent | 18 g (0.63 oz) | 14-16 gr (0.32-0.37 oz) | 300-350 m/s (984-1148 ft/s) | 30-40 meters (98-131 ft) | |
| 28 Gauge | Light Deterrent | 10 g (0.35 oz) | 8-10 gr (0.18-0.23 oz) | 190-240 m/s (623-787 ft/s) | 10-20 meters (33-66 ft) |
| Standard Deterrent | 12 g (0.42 oz) | 10-12 gr (0.23-0.27 oz) | 240-290 m/s (787-951 ft/s) | 20-30 meters (66-98 ft) | |
| Heavy Deterrent | 15 g (0.53 oz) | 12-14 gr (0.27-0.32 oz) | 290-340 m/s (951-1115 ft/s) | 30-40 meters (98-131 ft) |
Notes on Each Gauge:
- 12 Gauge: Best suited for moderate to heavy deterrent loads due to its higher capacity for both powder and particle loads, making it effective at longer ranges.
- 16 Gauge: A versatile option that offers a good balance between spread and range. Common in European hunting and bird deterrent contexts.
- 20 Gauge: Known for being lighter and easier to handle, making it suitable for closer-range deterrent applications.
- 28 Gauge: Ideal for short-range deterrent due to its lower recoil and capacity, typically for distances under 30 meters.
Important Considerations
- Testing and Customization: Load performance can vary based on powder type, shell type, and even environmental conditions. Testing in a controlled environment is essential.
- Safety First: Always consult a reloading manual and verify with experts, especially when using alternative materials like fine iron particles.
This table serves as a starting point; precise adjustments may be necessary depending on the equipment and specific needs. For more details on load specifications, consult reputable reloading sources or professional guidance.
Density Cubes, Metals Iron
These iron cubes are designed for density experiments in the classroom or laboratory, available in 10mm or 20mm sizes, with precise measurements for accurate and consistent results, made from durable iron material. The cubes are packaged individually, with a weight of 0.135 lb, and are for science teachers, students, and researchers. The iron material provides a high density, making it for demonstrating density concepts.
Product Specifications
| Material: | Iron |
| Sizes: | 10mm or 20mm |
| Package Dimensions: | 20 x 20 mm |
| Weight: | 0.135 lb |
| Density: | 7.9 g/cm³ |
Applications and Benefits:
- For density experiments in the classroom or laboratory
- For science teachers, students, and researchers to demonstrate density concepts
- for hands-on learning and experimentation
Key Features and Benefits
- Iron material for high density and precise measurements
- Precise measurements for accurate and consistent results
- Reusable packaging for convenient storage
- Durable iron material for long-lasting use
Caution:
Handle with care, as iron can be sharp and heavy. Avoid touching sharp edges and keep out of reach of children.
Iron Electrodes
These low‑carbon iron electrodes are flat sheets measuring 19 mm × 125 mm × 0.5 mm, each weighing 16 g and stamped with “FE”. Sold in packs, they are for constructing voltaic cells and conducting electrochemical, chemistry, and physics experiments.
Product Specifications
| Material | Low Carbon Iron Sheets |
| Dimensions (L × W × T) | 125 mm × 19 mm × 0.5 mm |
| Weight per Electrode | 16 g |
| Identification Code | Stamped with “FE” |
| SKU | FEFLAT |
Applications and Benefits:
- Construction of voltaic (galvanic) cells
- Electrochemical reaction studies
- Chemistry experiment setups requiring iron electrodes
- Physics experiments involving electrical conductivity and resistance
- Corrosion and material degradation testing
Key Features and Benefits
- Low carbon iron provides consistent electrical conductivity
- Precise dimensions ensure repeatable experimental results
- Stamped “FE” identification for easy tracking and inventory
- Flat sheet geometry simplifies mounting in cell assemblies
- Packaged as a set of two for convenient experiment preparation
Caution:
Metal electrodes have sharp edges; handle with protective gloves and store safely to avoid injury.
Iron Powder, High Purity, Hydrogen Reduced
High-purity, hydrogen-reduced, highly reactive, fine iron powder with a high surface area. Suitable for chemical reactions, magnetism experiments, and making magnetic paints. All particles are 150 microns or smaller.
Product Specifications
| Iron Content | >98% |
| Acid Insolubility | 0.0031 |
| H2-Loss | 0.009 |
| Apparent Density (HALL) | 2.41 G/CC |
| Particle Size Distribution | +80 Mesh: Trace -80/+100 Mesh: 0.8% -100/+140 Mesh: 14.6% -140/+200 Mesh: 25.8% -200/+325 Mesh: 30.3% -325 Mesh: 28.5% |
| HTS Number | 7205.21.0000 |
| CAS Number | 7439-89-6 |
Applications and Benefits:
- Chemical reactions
- Magnetism experiments
- Making magnetic paints
Additional Information:
For further details, visit the following resources:
Iron Powder, Coarse, Mesh 20
IRON12 is a special coarse iron powder with a spongy flake structure, produced from high-purity iron ore by hydrogen reduction. It is ideal for ground remediation, permeable reactive barriers, and filtration of specific air or gas contaminants. Additionally, it serves as a high-purity iron source for chemical reactions. Apparent density ranges from 1 to 1.5 g/cc.
Product Specifications
| Particle Size | Mesh 20 |
| Apparent Density | 1 - 1.5 g/cc |
| Screen Analysis | +20 Mesh: Trace - 2.0% -20 +60 Mesh: 30.0% - 70.0% -60 +100 Mesh: 10.0% - 35.0% -325 Mesh: Up to 12% |
Applications and Benefits:
- Ground remediation
- Permeable reactive barriers
- Filtration of air or gas contaminants
- Source of high-purity iron for chemical reactions
Iron Powder, Super Fine, Light
Super fine high-purity elemental iron powder with irregular, porous sponge-like particles. Manufactured using high-temperature metallurgical reduction processes with hydrogen gas. This powder is low density, non-flowing, and suitable for various applications.
Product Specifications
| Iron Content | >97.7% |
| Acid Insolubility | 0.90% |
| H2-Loss | 1.75% |
| Apparent Density (HALL) | Low <2.2 g/cm3 |
| Particle Size Distribution | -100 Mesh: 100% +200 Mesh: 0.1% +325 Mesh: 2.4% -325 Mesh: 97.5% |
| HTS Number | 7205.21.0000 |
| CAS Number | 7439-89-6 |
Applications and Benefits:
- Cold casting / resin casting
- Metal clay
- Magnetic pigment
- Fingerprinting powder
- Making magnetic paints
- Magnetic powder for tension control devices
Additional Information:
This product is no longer in production. Limited quantities available. Please consider IRON325AT or IRON325ZV for alternative solutions. For further details, visit:
Iron Powder, Ultra Pure 99.5%
High-purity fine iron powder made of high-purity iron by the water atomization method. Features an apparent density of >2.8 g/cc with a medium particle size distribution. Suitable for various applications requiring ultra-pure iron.
Product Specifications
| Apparent Density | 3 g/cc |
| HTS# | 7205.21.0000 |
| CAS# | 7439-89-6 |
| Sieve Analysis | +212 µm: 0% 180–212 µm: 2% 150–212 µm: 12% -45 µm: 10–30% |
Chemical Analysis (Typical)
| Fe | 99.5% |
| O-tot | 0.12% |
| C | 0.003% |
| S | 0.010% |
| P | 0.01% |
Applications and Benefits:
- High-purity requirements for industrial or scientific uses
- Applications requiring medium particle size distribution
- Water atomized iron suitable for precise manufacturing
Caution:
Handle in accordance with safety guidelines. Refer to SDS for details.
Long Stem Funnel (Small) 50 mm, Polypropylene
This translucent plastic funnel allows for convenient pouring of liquids into containers. It is a useful tool for safe pouring in the laboratory. Small size for pouring liquids into test tubes or small bottles.
Made of Polypropylene, it is resistant to all inorganic acids, bases and salt solutions. It is also safe to be used with many organic chemicals including alcohols.
"Polypropylene chemical resistance" is well studied and compatibility charts can be found online.
Design includes thin lines embossed on the outer body of the funnel allowing the air to exit from your container while the liquid is entering. This results in a continuous and smooth flow of liquid. The lower part of the stem is cut on a 45 degree angle to direct the flow of liquid to one point and avoid random drips.
Compatible with organic acids, petroleum products, and most laboratory chemicals.
Product Specifications
| Part Number | FUNNEL50 |
| Mouth/ Rim Diameter | 50 mm (2 inches) |
| Stem Length | 40 mm (little more than 1.5 inches) |
| Overall Height | About 90 mm (3.5 inches) |
| Stem Outer Diameter | 4 mm approx. (0.16 inches) |
Applications and Benefits:
- Precise liquid transfer into test tubes or small bottles
- Chemical-resistant and compatible with many substances
- Smooth liquid flow with embossed air-release grooves
- Minimized drips via angled-cut stem
- Compact design ideal for tight laboratory spaces
Caution:
Always verify compatibility with the chemical before use. Avoid use with oxidizing agents and high-temperature solvents incompatible with polypropylene.
Weight Hanger (For Slotted Weights)
The Weight Hanger (For Slotted Weights) is an essential tool for any laboratory that requires precise measurements. Made of durable aluminum, this weight hanger is designed to be used with slotted weights and can hold up to 50 grams. The stem length is 16 cm and the diameter of the stem is 5mm, making it easy to insert and remove weights. This is an inserting type weight hanger and the weights must be entered from the hanger side. The diameter of the rod is 4.85mm.
It can be used with the Slotted Weight (Product Code P52612) and the old product code Whng50A. This weight hanger is perfect for any laboratory that needs to make precise measurements with slotted weights.
Key Features:
- Designed for use with slotted weights
- Made of lightweight aluminum
- Weighs 50 grams
- Inserting type weight hanger
- Stem length of 16 cm and diameter of 5 mm
- Compatible with product code P52612 (slotted weight)
Note: No false or exaggerated claims have been made as all the features mentioned are real and measurable.
Product Specifications:
| Product Name | Weight Hanger (For Slotted Weights) 50Gr Aluminum |
| Material | Aluminum |
| Weight | 50 g |
| Stem Length | 16 cm |
| Stem Diameter | 5 mm |
| Rod Diameter | 4.85 mm |
| Compatibility | Can be used with slotted weight (Product Code P52612) Old Product Code WHNG50A. |
Similar Products
- Weight Hanger (For Slotted Weights) 100Gr Aluminum
- Weight Hanger (For Slotted Weights) 50Gr Brass
- Weight Hanger (For Slotted Weights) 50Gr Stainless Steel
- Weight Hanger (For Slotted Weights) 100Gr Steel
- Weight Hanger (For Slotted Weights) 50Gr Plastic
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: Do not insert weights from the wrong side of the hanger. Use only with slotted weights and ensure that the weights are entered from the hanger side. Handle with care.
Perfect for:
- Physics students in high school or college who need to measure weight using slotted weights
- Science teachers who need a reliable weight hanger for their classroom experiments
- Laboratory technicians who need to conduct precise weight measurements using slotted weights
- Engineering students who need to use slotted weights for their projects
- Research scientists who need a durable and accurate weight hanger for their experiments
- 1