Advanced Search Results
Refine your search by using the category filter.
Steel Powder, Iron Powder, 250 Micron
Coarse steel powder (S100N) is produced from recycled black steel (construction steel) with improved features like dust-free, equal-size, and mostly spherical particles. It demonstrates strong magnetic attraction, has a high flow rate for dispensing from shakers, and is free from organic impurities such as cutting oil. This product is ideal for educational and industrial applications, including magnetism experiments, rust effect creation, and as a plant nutrient for iron supplementation.
Specifications
Product Type | Recycled Black Steel (Construction Steel) |
Particle Size | 250 Micron |
Special Features | Dust-free, Spherical Particles, High Flow Rate |
Magnetic Properties | Strong Magnetic Attraction |
Organic Impurities | None |
Carbon (C) | 0.8% - 1.2% |
Manganese (Mn) | 0.35% - 1.2% |
Silicon (Si) | 0.4% Minimum |
Sulfur (S) | 0.05% Maximum |
Phosphorus (P) | 0.05% Maximum |
Applications and Benefits:
- Used as iron filings for magnetism and electromagnetism experiments
- Preferred for educational use due to cleanliness and contamination-free particles
- Creates rust effects in sculptures, concrete, and structures
- Serves as a plant nutrient for iron supplementation
- High flow rate makes it suitable for dispensing from shakers
Caution:
This product may rust over time due to its recycled steel composition. Handle with care and review the Material Safety Data Sheet (MSDS) for safety precautions.
Activated Carbon Powder
Powdered activated carbon, derived from selected grades of coconut shell, is a virgin product designed for liquid phase applications. It efficiently removes organics from water streams and is certified by the NSF for use in drinking water and food-grade applications.
Product Specifications
Mesh Size | -325 Mesh, 90% (min) |
Iodine Number | 1100 mg/g (min) |
pH | 8-10 |
Ash Content | 4% (max) |
Moisture Content | 5% (max) |
Typical Density | 30-33 lbs/cuft, 0.48-0.53 g/cc |
Applications and Benefits:
- Removes organics from water streams.
- NSF certified for drinking water and food-grade use.
- Suitable for liquid phase purification.
- Derived from selected coconut shell grades for superior quality.
- High iodine number ensures effective performance.
Caution:
Wet activated carbon removes oxygen from the air, posing a severe hazard to workers inside carbon vessels. Follow confined space/low oxygen procedures per Local, State, and Federal guidelines before entry.
Barium Sulfate
Barium Sulfate (BaSO₄) is a chemically precipitated, high-purity compound widely used as a filler and functional additive in paints, coatings, pigments, plastics, and lead-acid batteries. Renowned for its outstanding chemical purity and narrow particle size distribution, Barium Sulfate offers excellent dispersion properties, high gloss, and low binder demand. Its extremely low chloride content and reduced electrical conductivity (100 µS/cm) make it ideal for demanding industrial applications. With an average particle size of 1.7 µm and an oil index of 13 g/100g, Barium Sulfate ensures optimal performance in various formulations. It is resistant to water, acids, alkalis, organic solvents, light, and industrial waste gases, including sulfur dioxide. Its versatility and exceptional properties make it a preferred choice for manufacturers in paints, coatings, plastics, and batteries.
Key Features
- Chemically precipitated, high-purity Barium Sulfate
- Excellent dispersion, high gloss, and low binder demand
- Extremely low chloride content and reduced electrical conductivity
- Resistant to water, acids, alkalis, and industrial gases
- Applications in paints, coatings, plastics, and batteries
Product Specifications
Chemical Name | Barium Sulfate |
CAS Number | 7727-43-7 |
Chemical Formula | BaSO₄ |
Particle Size | 1.7 µm (average) |
Applications | Paints, coatings, plastics, pigments, batteries |
Oil Index | 13 g/100g |
Electric Conductivity | 100 µS/cm |
Perfect for industrial fillers and functional additives.
Boric Acid, NF/USP Grade, Powder
Boric Acid (H3BO3; CAS# 10043-35-3) is a weak acid of boron commonly used as an antiseptic, insecticide, flame retardant, neutron absorber, and a precursor for other chemical compounds. Additional applications include textile fiber glass, borosilicate glass, glazes and enamels, casting powder, and flux.
Product Specifications
Chemical Name | Boric Acid |
Synonyms | Orthoboric Acid, OPTIBOR NF, Hydrogen Borate, Acidum Boricum |
Molecular Formula | H3BO3 |
CAS Number | 10043-35-3 |
Applications and Benefits:
- Antiseptic and antimicrobial applications
- Flame retardant properties
- Neutron absorber in nuclear applications
- Textile fiber glass and borosilicate glass manufacturing
- Used in glazes and enamels
- Serves as casting powder and flux
Caution:
This product cannot be used as an insecticide or for carpet/upholstery deodorization or flea control. It is not intended for food applications, human nutritional supplements, or as food additives or preservatives.
Bromothymol Blue, Powder, >99%
Bromothymol Blue (also known as bromothymol sulfone phthalein, Bromthymol Blue, and BTB) is a chemical indicator for weak acids and bases. In a pH of 6.0 or lower, it is yellow. It changes color between the pH of 6 to 7.6 when it becomes completely blue at the pH 7.6.
Product Specifications
Chemical Name | Bromothymol Blue |
Synonyms | Bromothymol sulfone phthalein, BTB |
Purity | >99% |
Color Change Range | Yellow at pH ≤6.0, Blue at pH ≥7.6 |
Chemical Formula | C27H27O5SBr2Na |
Molecular Weight | 646.38 g/mol |
CAS Number | 34722-90-2 |
Applications and Benefits:
- Used as a chemical indicator for weak acids and bases.
- Facilitates pH measurement in the range of 6.0 to 7.6.
- High purity powder for accurate scientific applications.
- 1 gram can prepare 10 liters (3 gallons) of indicator solution.
Caution:
This high-purity product requires special procedures for solution preparation. For beginners, a ready-to-use solution (BTB10S) is recommended.
Bronze Powder, Spherical, Light
Prealloyed high-density spherical bronze powder is designed for specialized applications such as flame-spraying, brazing, strip bearings, metal-bonded grinding wheels, cutting tools, and metal injection molding (MIM). It is also suitable for resin-bonded friction components, decorative cold casting, surface engineering, filters, and hydraulic seals.
Product Specifications
Chemical Composition | Copper: 89.7% Tin: 10% Phosphorous: 0.3% |
Apparent Density | 5 g/cc |
Particle Shape | Spherical |
Sieve Analysis (% Weight) | +100 Mesh: 0% -100/+140: 0% -140/+200: 0.1% -200/+325: 2.8% -325: 97.1% |
Applications and Benefits:
- Flame-spraying applications
- Brazing and welding materials
- Strip bearings
- Metal-bonded grinding wheels
- Cutting tools
- Metal injection molding (MIM)
- Decorative applications, including cold casting
- Resin-bonded friction components
- Surface engineering
- Filters and hydraulic seals
Caution:
Handle with care and follow safety guidelines as detailed in the SDS. Ensure suitability for the intended application before use.
Carbonyl Iron Powder (CIPMS)
CIPMS is Carbonyl Iron Powder, a zero valent iron powder in the form of microspheres with particle sizes ranging from 3 to 10 microns. Manufactured using advanced technology, it achieves an exceptional purity of 99.5% or more. This fine iron powder exhibits outstanding magnetization behavior, making it ideal for diverse applications such as metal injection molding, inductive electronic components, microwave absorption, magnetic ink, and magnetic plastic parts.
Product Specifications
Iron (Fe) | 97.8% - 99.5% |
Carbon (C max) | 0.75 - 0.90% |
Nitrogen (N max) | 0.65 - 0.90% |
Oxygen (O max) | 0.15 - 0.40% |
d10 (Particle Size) | 1.7 - 2.7 Micron |
d50 (Particle Size) | 3.9 - 5.2 Micron |
d90 (Particle Size) | 7.2 - 9.2 Micron |
Applications and Benefits:
- Metal injection molding
- Inductive electronic components
- Microwave absorption materials
- Magnetic inks and plastics
- Advanced magnetization applications
Caution:
Limited quantity product. Ships only to the US lower 48 states and Canada. No COA is available for this product. Handle and use according to safety guidelines provided in the SDS.
Cast Iron Powder, Thermal Spray
Cast iron powder used in the manufacturing of specialty alloys and as an ingredient in pyrotechnic mixtures. Also suitable for thermal spray applications, with recommendations to consider S1001 and S145C for such purposes. Engineered for industrial use with high metallic iron content and controlled granulation.
Product Specifications
Metallic Iron | >90% |
Total Carbon | 2.85% |
Manganese | <1.0% |
Silicon | <3.0% |
Chromium | <1.0% |
Granulation | Passing 20 mesh: 95-100%, Passing 100 mesh: 1% Max. |
Applications and Benefits:
- Manufacturing of specialty alloys
- Ingredient in pyrotechnic mixtures
- Thermal spray applications
- High iron content for industrial use
- Controlled granulation for specific needs
Caution:
Evaluate product suitability before large-scale use. For thermal spray applications, also consider S1001 and S145C. Store in a dry, cool place to maintain granulation and performance.
Copper Powder 99+%, Mesh 200
High-purity copper powder made via water atomization and hydrogen reduction. Features very fine, irregular particles and clusters with relatively lower density. Recommended for applications requiring high purity and conductivity, including diamond wheels, sintering, and chemical reactions. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will conduct when compacted or mixed with oils or resins.
Product Specifications
Purity | 99.3% |
Hydrogen Loss | 0.39% |
Apparent Density | 2.6 - 2.8 g/cc |
Mesh Size | 200 mesh |
Sieve Analysis |
+100 Mesh: Trace +140 Mesh: 1% Max +200 Mesh: 3% Max +325 Mesh: Balance -325 Mesh: 90% Min |
HTS Code | 7406.10.0000 |
NMFC | 30743 |
CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Conductive inks, paints, and pastes
- Injection molding
- Thermal management
- EDM electrodes
- Antifouling paints
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
- Diamond wheels
- Chemical reactions
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder 99.3%, General Purpose, 150 Mesh
The most popular and widely used copper powder, produced by the water atomization method followed by hydrogen reduction. This general-purpose copper powder has diverse applications, including the production of copper compounds, use as a catalyst in chemical formulations, abrasive wheels, carbon brushes, and more. It is important to note that pure copper powders may not exhibit continuity or conductivity under low-voltage multimeter tests due to air gaps and weak particle contacts but will show conductivity under higher voltage, when compacted, or mixed with oils/resins to form a paste.
Product Specifications
Purity | 99.3% |
Apparent Density | 2.7 g/cc |
Nominal Mesh | -140 |
-325 Mesh Ratio | > 50% |
HTS Code | 7406.10.0000 |
NMFC | 30743 |
CAS No. | 7440-50-8 |
Applications and Benefits:
- Production of copper compounds
- Catalyst in chemical formulations
- Abrasive wheels
- Carbon brushes
- Electronics and electrical applications
- Decorative and protective coatings
- Brazing and general-purpose industrial use
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder 99.3%, Mesh 325
Ultra-fine, high-purity copper powder made via water atomization and hydrogen reduction. Features spheroidal particles and clusters, offering higher conductivity and lower density. Suitable for metal injection molding and applications requiring high conductivity and purity. Typical applications include conductive inks, paints, pastes, thermal sprays, and sintered products. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will show conductivity when compacted or mixed with oils or resins.
Product Specifications
Purity | 99.31% |
Hydrogen Loss | 0.39% |
Apparent Density | 2.97 g/cc |
Mesh Size | 325 mesh |
Sieve Analysis |
+60 Mesh: 0% -60/+80 Mesh: 0% -80/+100 Mesh: 0% -100/+140 Mesh: Trace -140/+200 Mesh: Trace -200/+325 Mesh: 0.6% -325 Mesh: 99.4% |
HTS Code | 7406.10.0000 |
NMFC | 30743 |
CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Conductive inks, paints, and pastes
- Injection molding
- Thermal management
- EDM electrodes
- Antifouling paints
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder 99.5% - 99.9%
Ultra-fine, very high purity copper powder made via air atomization and hydrogen reduction. Features spherical particles with high conductivity and density. Recommended for diverse applications, including thick and thin film pastes, capacitor chips, end cap terminators, and thermal sprays. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will show conductivity when compacted or mixed with oils or resins.
Product Specifications
Purity | 99.81% |
Iron | 0.01% |
Hydrogen Loss | 0.18% |
Apparent Density | 4.89 g/cc |
Sieve Analysis |
+200 Mesh: 0% -200/+325 Mesh: 4.8% -325 Mesh: 95.2% |
HTS Code | 7406.10.0000 |
NMFC | 30743 |
CAS No. | 7440-50-8 |
Product Code | CU112SP |
Applications and Benefits:
- Thick and thin film pastes
- Capacitor chips
- End cap terminators
- Conductive inks, paints, and pastes
- Injection molding
- Electronics
- Thermal management
- EDM electrodes
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder 99.8%, Electronic Grade, Mesh 325
Electronic grade, high-purity copper powder made via water atomization and hydrogen reduction. Features ultra-fine, spheroidal particles with high conductivity and low density. Recommended for a variety of applications where conductivity is crucial, including thick and thin film pastes, capacitor chips, and thermal sprays. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will conduct when compacted or mixed with oils or resins.
Product Specifications
Purity | 99.85% |
Hydrogen Loss | 0.19% |
Apparent Density | 2.97 g/cc |
Mesh Size | 325 mesh |
Sieve Analysis | +60 Mesh: 0% -60/+80 Mesh: 0% -80/+100 Mesh: 0% -100/+140 Mesh: Trace -140/+200 Mesh: Trace -200/+325 Mesh: 0.6% -325 Mesh: 99.4% |
HTS Code | 7406.10.0000 |
NMFC | 30743 |
CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Capacitor chips
- End cap terminators
- Conductive inks, paints, and pastes
- Injection molding
- Electronics
- Thermal management
- EDM electrodes
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder > 99% (150 - 325 Mesh)
General-purpose, highly pure (>99%) copper powder made from electrolytic copper. Granular copper with a mesh size of 150 - 325. Known for its excellent electrical and thermal conductivities, this product finds use in the electrical and electronic industries. Additional applications include self-lubricating bearings, brazing, cold soldering, and mechanical plating. It is also used for antifouling paints, decorative and protective coatings, printing inks, medals, medallions, metal-plastic decorative products, and various chemical and medical purposes.
Product Specifications
Purity | >99% |
Mesh Size | 150 - 325 |
Screen Analysis |
+60: 0.0% -60/+100: 0.7% -100/+200: 89.7% -200/+325: 9.1% -325: 0.5% |
Applications and Benefits:
- Electrical and electronic applications
- Self-lubricating bearings
- Brazing and cold soldering
- Mechanical plating
- Antifouling paints and decorative coatings
- Printing inks
- Medals, medallions, and metal-plastic decorative products
- Chemical and medical purposes
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
CU264: Copper Powder, 99.5%, Mesh 100
High purity copper powder, nominal mesh 100, Apparent density: 2.6 g/cc, Copper > 99.5%, with irregular shape particles. Used in powder metallurgy. May be admixed with other metal powders and graphite for specific properties such as strength, hardness and wear resistance for structural parts.
HTS Code: 7406.10.0000
NMFC: 30743
CAS: 7440-50-8
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features
- High Purity Copper (>99.5%)
- Nominal Mesh 100 for fine granularity
- Irregular particle shape for diverse uses
- Compatible with other metals and graphite
- Conductivity with higher voltage or when compacted
Product Specifications
Apparent Density | 2.6 g/cc |
Purity | > 99.5% Copper |
Particle Shape | Irregular |
Conductivity | At higher voltages/when compacted |
Applications | Powder Metallurgy, Alloys |
Similar Products
- High purity bronze powder, metallurgy
- Fine granular aluminum powder, industrial
- Nickel powder, high density, 99% purity
- Spherical zinc powder, corrosion-resistant
- Iron powder, magnetic, for alloys
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Metallurgists, Industrial Manufacturers, Material Scientists, Engineering Students, Research and Development Labs

CU118SP Copper Powder, Fine, Spherical
Our specification guarantees that at least 80% of this powder are particles smaller than 44 micron. A typical analysis however shows that 88% of particles are smaller than 44 micron. Most particles are between 16 micron and 28 micron.
Applications include cold casting, 3-D printer filaments, metal clay, sintering, Green/ blue patina and rust effect, preventing mold in concrete, plaster,dry-wall, paint, adhesives and grout.
Also used in 3D printing process known as Selective Powder Deposition (SPD)
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features:
- High-purity, high-density spherical copper powder
- Provides high heat conductivity and electrical conductivity
- Suitable for various applications, including cold casting, 3-D printer filaments, metal clay, sintering, green/blue patina and rust effect, preventing mold in concrete, plaster, dry-wall, paint, adhesives, and grout
- Used in the 3D printing process known as Selective Powder Deposition (SPD)
- Particle size distribution with 88% of particles smaller than 44 micron
Product Specifications:
Copper Purity | Over 99.5% |
Hydrogen Loss | Less than 0.7% |
Apparent Density | 4.5-5.5 g/cc |
Typical Analysis | Copper > 99.5% Hydrogen Loss < 0.7% Apparent Density, g/cc: 4.5 - 5.5 Passing mesh 325 (44 micron): 80% ~ 88% |
Similar Products:
- Ultra-Fine Copper Powder
- High-Purity Copper Foil
- Copper Wire
- Copper Rod
- Copper Sheet
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for enhanced conductivity and versatility applications, including cold casting, 3-D printing, metal clay, and more.

CU7005F Copper Powder
Copper Powder offers exceptional metallic shine, ideal for metallic inks and paints. Compatible with most resins and conductive for ink creation.
For more details, visit the CU7005F product data sheet.
Key Features
- Exceptional metallic shine
- Art-grade pigment quality
- Compatible with various resins
- Usable with drying oils like linseed
- Enables creation of conductive inks
Product Specifications
Type | Copper Powder |
Use | Metallic Inks, Paints |
Compatibility | Polyurethane, Polyacrylic, Polyester |
Conductivity | Suitable for Conductive Inks |
Pigment Quality | Art Grade |
Similar Products
- Metallic-shine gold powder for inks
- Silver pigment powder, art-grade
- Bronze powder, resin-compatible
- Reflective aluminum powder, versatile
- Artistic brass powder for painting
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Artists, Paint Manufacturers, and DIY Craft Enthusiasts
Copper Powder CU112SP
CU112SP is a super fine, high density, high purity spherical copper powder that provides high heat conductivity and electrical conductivity properties to your products.
Our specification guarantees that at least 95% of this powder are particles smaller than 44 micron. A typical analysis however shows that 99.9% of particles are smaller than 44 micron. Most particles are between 10 micron and 22 micron.
HTS Code: 7406.10.0000.
NMFC: 30743
CAS: 7440-50-8
Applications include cold casting, 3-D printer filaments, metal clay, sintering, Green/ blue patina and rust effect, preventing mold in concrete, plaster,dry-wall, paint, adhesives and grout.
Also used in 3D printing process known as Selective Powder Deposition (SPD)
Old product code: CU155A
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features
- Super fine, spherical particles
- High density and purity
- Excellent thermal and electrical conductivity
- Consistent particle size distribution
- Versatile applications in industry and art
Product Specifications
Particle Size | 95% < 44 microns |
Purity | > 99.2% Copper |
Apparent Density | 4.5 - 5.5 g/cc |
Hydrogen Loss | < 0.7% |
Mesh Passing | 99.9% through 325 (44 micron) |
Similar Products
- Fine silver powder, high conductivity
- Spherical bronze powder, 3D printing
- Fine aluminum powder, thermal conductivity
- High-purity zinc powder, corrosion resistance
- Spherical titanium powder, lightweight strength
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for 3D Printing Enthusiasts, Industrial Manufacturers, Electronics Professionals, Artists and Sculptors, Construction Material Suppliers

Highly pure (>99%) electrolytic copper in a granular form, Copper Filings are versatile for various industrial, chemical, and artistic applications. Mesh 25 - 325 suitable for electrical and thermal conductivities.
Key Features
- Highly pure electrolytic copper
- Excellent electrical and thermal conductivities
- Versatile mesh size from 25 - 325
- Useful in a wide range of applications
- Effective for coatings, brazing, and soldering
Product Specifications
Material | Copper >99% Purity |
Mesh Size | 25 - 325 |
Form | Granular Mixed Grain |
Applications | Electrical, Mechanical, Decorative |
Similar Products
- High conductivity copper mesh
- Electrical grade copper pellets
- Thermal conductive copper strips
- Fine copper powder for coating
- Brazing grade copper granules
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Electrical Engineers, Industrial Manufacturers, Artists and Craftsmen, Chemical Technicians, Medical Equipment Manufacturers

Safety Data Sheet for Copper Powder
CU41, Copper Powder, Mesh 40 (Coarse)
High purity atomized copper powder -40/ 100 US Mesh has the largest grains compared with our other copper powder products. It is also usually darker in color. Minimum purity: 99.0%. Typical Apparent Density: 2.4. Nominal Mesh: -40/ 100. HTS Code: 7406.10.0000. NMFC: 30743. CAS: 7440-50-8. Typical Analysis: Copper: 99.87%, Hydrogen Loss: 0.21%, Apparent Density: 2.57 g/cc. Sieve Analysis: 40 mesh 0%, -40/ 100 mesh 90.4%, -100/ 140 mesh 9%, -140 mesh 0.6%.
Key Features
- High purity, minimum 99.0%
- Coarse grain size, -40/ 100 US Mesh
- Dark color, distinct appearance
- Apparent Density: 2.57 g/cc
- Comprehensive sieve analysis included
Product Specifications
Purity | 99.87% |
Hydrogen Loss | 0.21% |
Apparent Density | 2.57 g/cc |
Mesh Size | >40 mesh 0% -40/ 100 mesh 90.4% -100/ 140 mesh 9% -140 mesh 0.6% |
HTS Code | 7406.10.0000 |
NMFC | 30743 |
CAS Number | 7440-50-8 |
Similar Products
- Fine grain, 99% pure copper powder
- Medium grain, dark copper powder
- High-density, fine copper powder
- Coarse, 98% pure copper flakes
- Atomized, spherical copper granules
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Industrial Manufacturers, Metal Fabrication Professionals, Chemical Industry Experts, Research and Development Teams, Specialty Alloy Producers