Español Advanced Search Results
Refine your search by using the category filter.
Ultra fine copper powder with spheroidal particles for high conductivity applications.
Ultra fine copper powder with spheroidal particles for high conductivity applications.
High-purity nickel pellets for chemical reactions and special alloys.
High-viscosity, partially hydrolyzed, versatile polymer., Elvanol 50-42
High-purity potassium iodide for laboratory, industrial, and research uses.
For MSDS Go to Downloads TabCopper Powder
Copper powder, high purity, water atomized, hydrogen reduced ultra fine copper powder with spheroidal particles and clusters. Higher conductivity. Lower Density.
May be used for metal injection molding as well as other applications were the conductivity and purity of product is important.
HTS Code: 7406.10.0000
NMFC: 30743
CAS: 7440-50-8
Recommended for:
- Thick and Thin Film pastes
- Conductive Inks, paints and pastes
- Injection Molding
- Thermal management
- EDM Electrodes
- Antifouling Paint
- Thermal Sprays
- Sintered alloys/ products
- Brazing/ soldering paste
Typical Analysis:
Copper: 99.31%
Hydrogen Loss: 0.39%
Apparent Density: 2.97 g/cc
SIEVE ANALYSIS
60 MESH: 0%
-60/ 80 MESH: 0%
-80/ 100 MESH: 0%
-100/ 140 MESH: TR
-140/ 200 MESH: TR
-200/ 325 MESH: 0.6%
-325 MESH: 99.4%
Note: Pure copper powders do not show continuity or conductivity by a multimeter. I think there are two reasons for that. One is the low voltage used for the test. The other is lots of air and weak contacts between the particles. They will show conductivity with higher voltage, when they are compacted and when they are mixed with some oil or resin to form a paste.
CU301-E: Copper Powder 99.8%
Safety Data Sheet for Copper Powder
Electronic grade Copper powder, high purity, water attomized, hydrogen reduced ultra fine copper powder with spheroidal particles. Higher conductivity. Lower Density.
May be used for metal injection molding as well as other applications were the conductivity of product is important.
HTS Code: 7406.10.0000
NMFC: 30743
CAS: 7440-50-8
Note: Pure copper powders do not show continuity or conductivity by a multimeter. I think there are two reasons for that. One is the low voltage used for the test. The other is lots of air and weak contacts between the particles. They will show conductivity with higher voltage, when they are compacted and when they are mixed with some oil or resin to form a paste.
Key Features
- 99.8% pure copper
- Ultra-fine, spheroidal particles
- High conductivity and lower density
- Suitable for metal injection molding
- Effective in electronic applications
Product Specifications
| Purity | 99.85% |
| Particle Size | -325 Mesh |
| Density | 2.97 g/cc |
| Application | Metal Injection Molding, Electronics |
| Typical Analysis: | Copper: 99.85% Hydrogen Loss: 0.19% Apparent Density: 2.97 g/cc SIEVE ANALYSIS 60 MESH: 0% -60/ 80 MESH: 0% -80/ 100 MESH: 0% -100/ 140 MESH: TR -140/ 200 MESH: TR -200/ 325 MESH: 0.6% -325 MESH: 99.4% |
Similar Products
- High purity, sintering silver powder
- Fine nickel powder, electronic applications
- Ultra-fine aluminum powder, high conductivity
- Spherical zinc powder, lower density
- Conductive graphene powder, versatile use
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for electronics manufacturers, R&D labs, and specialists in conductive materials.
Recommended for:
- Thick and Thin Film pastes
- Capacitor Chips
- End cap Terminators
- Conductive Inks, paints and pastes
- Injection Molding
- Electronics
- Thermal management
- EDM Electrodes
- Thermal Sprays
- Sintered alloys/ products
- Brazing/ soldering paste
For MSDS Go to Downloads Tab
HROSIN - Pine Rosin
HROSIN is colophony or gum derived from pine tree species known as Pinus Oocarpa in Honduras. It is produced by heating fresh liquid resin to vaporize the volatile liquid components. It is semi-transparent pine rosin and varies in color from dark yellow to light brown.
HROSIN contains about 10% natural unsaponifiable matter that provides anticrystalline properties to the rosin and its compounds.
General Information:
- Main applications include adhesives, chewing gums, coatings, cosmetics, linoleum, paints, printing inks, resins, rubber, sizes, varnishes.
Specifications:
| Color Grade USDA | WG/WW |
| Appearance | Pale Yellow, Transparent |
| Softening Point (Ring & Ball) | 66 – 72°C |
| Acid Number (mgKOH/g) | 147 – 155 |
| Specific Gravity @ 25°C | 1.06 – 1.08 |
| Refractive Index 20°C | 1.540 |
| Unsaponifiable Matter | 7 – 12.1% |
| Toluene Insolubles | 0.01% Max. |
| Iron Content | 15 PPM Max. |
| Ash Content | 0.01% Max. |
| Volatiles Matter | Negligible |
| Flash Point °C (COC) | Above 204°C |
Similar Products:
- Pine Rosin
- Colophony Gum
- Pine Pitch
- Shellac
- Damar Resin
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Mechanical Tally Counter
Count anything with the mechanical tally counter - no batteries required. Counts up to 9,999 laps, runs, goals, strokes, overs, hits, people, goods delivered, and more. Reset knob in one side with metal ring for secure holding in hands. Suitable for business, pleasure, and many sports.
Key Features:
- Counts up to 9,999
- No batteries required
- Reset knob with metal ring
- Suitable for business, pleasure, and many sports
- Counts laps, runs, goals, strokes, overs, hits, people, goods delivered, and more
Product Specifications:
| Count Range | 0000 - 9999 |
| Reset Method | Rotating clockwise |
| Suitable For | Business, pleasure, and many sports (cricket, triathlon, baseball, basketball, walking, cycling, parachuting, rifle shooting, bird watching, bat watching, sport training, football, hockey, stool ball, golf, skating, etc.) |
| Materials | ABS plastic case |
| Additional Information | Lightweight and durable. Can also be used for counting trees, plants, fishing, even karaoke and other singing contests. |
Count Anything with the Mechanical Tally Counter - No Batteries Required
Key Features:
- Counts up to 9,999 laps, runs, goals, strokes, overs, hits, people, goods delivered, and more
- No batteries required
- Reset knob with metal ring for secure holding
- Suitable for business, pleasure, and many sports
- Lightweight and durable
- Can also be used for counting trees, plants, fishing, karaoke, and other singing contests
Product Specifications:
| Count Range | 0000 - 9999 |
| Reset Method | Rotating clockwise |
| Suitable For | Business, pleasure, and many sports (cricket, triathlon, baseball, basketball, walking, cycling, parachuting, rifle shooting, bird watching, bat watching, sport training, football, hockey, stool ball, golf, skating, etc.) |
| Materials | ABS plastic case |
| Additional Information | Lightweight and durable. Can also be used for counting trees, plants, fishing, even karaoke and other singing contests. |
Similar Products
- Handheld Tally Counter
- Student Grade Tally Counter
- Wholesale Tally Counter
- Curved Tally Counter
- Student Grade Metal Tally Counter
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: Keep away from children as it contains small parts that can be a choking hazard. Do not use in wet or damp conditions as it is not waterproof. Use with caution and follow instructions carefully to avoid injury.
Perfect for:
- Students
- Teachers
- Wholesale buyers
- Sports enthusiasts
- Business professionals
- Anyone who needs to count anything!
Lanolin Wax, USP Grade
Lanolin Wax, USP Grade is a high-quality wax that is derived from lanolin, a natural substance found in sheep's wool. This wax is widely used in the cosmetics and pharmaceutical industries for its emollient and moisturizing properties. It is also used in the production of ointments, creams, and lotions. Our Lanolin Wax, USP Grade is of the highest quality and purity, making it an ideal choice for a wide range of applications.
Product Specifications:
| Product Name | Lanolin Wax, Usp Grade |
| Grade | Usp Grade |
Perfect For:
- Pharmaceutical companies
- Cosmetics manufacturers
- Personal care product companies
- Health and wellness brands
- Natural and organic product companies
- Beauty salons and spas
Similar Products
- Lanolin Oil, Cosmetic Grade
- Lanolin Cream, Medical Grade
- Lanolin Anhydrous, Pharmaceutical Grade
- Lanolin Alcohol, Industrial Grade
- Lanolin Derivatives, Personal Care Grade
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: Keep out of reach of children. Avoid contact with eyes. If product gets into eyes, rinse thoroughly with water. Do not ingest.
Malic Acid, Food Grade
Malic Acid, Food Grade is a type of food additive that is commonly used in the food industry. It is a white crystalline powder that is odorless and has a tart taste. This acid is found naturally in many fruits, including apples, pears, and grapes. Malic Acid, Food Grade is often added to foods and beverages to enhance their flavor, as well as to act as a preservative. It is also used in the production of certain types of candies and baked goods. This food grade malic acid is safe for consumption and has been approved by the FDA for use in foods and beverages.
Product Specifications:
| Product Name: | Malic Acid |
| Grade: | Food Grade |
| Chemical Formula: | C4H6O5 |
| CAS Number: | 617-48-1 |
| Appearance: | White crystalline powder |
| Odor: | Odorless |
| Taste: | Sour taste |
Perfect For: Food and Beverage Manufacturers
- Food and beverage manufacturers who require a food grade malic acid as an ingredient in their products.
- Manufacturers who prioritize using high-quality, food grade ingredients in their products.
- Those who are looking for a natural acidulant to enhance the flavor of their products.
- Manufacturers who require a versatile ingredient that can be used in a variety of food and beverage applications.
- Those who prioritize working with reliable suppliers who can provide consistent quality and supply of malic acid.
- Manufacturers who value the benefits of using malic acid in their products, such as its ability to enhance sourness, improve texture, and act as a preservative.
Nickel Pellets, Electrolytic Grade
Nickel Pellets, Electrolytic Grade are highly pure with a purity level of at least 99.9%. These pellets are perfect for chemical reactions and for making special alloys. With a diameter range of 6mm up to 18mm (1/4" up to 3/4"), these pellets are versatile and can be used for a variety of applications.
| Product Name: | Nickel Pellets, Electrolytic Grade (100 Grams) |
| Pellet Type: | Pellets |
| Grade: | Electrolytic |
| Purity: | At least 99.9% |
| Suitable for: | Chemical reactions and making special alloys |
| Pellet Diameter: | 6mm up to 18mm (1/4" up to 3/4") |
Similar Products
- Nickel Powder, High Purity (100 Grams)
- Nickel Wire, Electrolytic Grade (1 Meter)
- Nickel Foil, Ultra-Thin (10 Grams)
- Nickel Sheet, High Purity (50 Grams)
- Nickel Rod, Electrolytic Grade (1 Meter)
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: Handle with care and use appropriate protective equipment when handling nickel pellets, as they may pose a hazard if ingested or inhaled. Keep out of reach of children and animals.
Perfect for:
- Chemical laboratories
- Manufacturers of special alloys
- Chemical researchers
- Industrial chemists
- Metallurgists
- Engineering students
Note: The target audience for this product is professionals and students in the fields of chemistry, metallurgy, and engineering who require high-purity nickel pellets for their work. The language and tone of the description should be technical and informative to cater to their needs and interests.
Polyvinylalcohol Grade 22-88
Polyvinylalcohol Grade 22-88, also known as PVA 217 or Elvanol 52-22 Grade, is a type of polyvinyl alcohol that is widely used in various industries. This product is a water-soluble polymer that is derived from vinyl acetate monomer. It has excellent film-forming properties, making it ideal for use in adhesives, coatings, and packaging materials. Polyvinylalcohol Grade 22-88 is also used as a thickening agent in various applications, such as in the production of paper, textiles, and personal care products. It is known for its high tensile strength, good flexibility, and excellent adhesion properties. If you are looking for a versatile and reliable polyvinyl alcohol product, Polyvinylalcohol Grade 22-88 is definitely worth considering.
Product Specifications:
| Product Name | Polyvinylalcohol Grade 22-88, Pva 217, Elvanol 52-22 Grade |
| Type | Polyvinylalcohol |
| Grade | Elvanol Polyvinylalcohol Grade 22-88, Pva 217, Elvanol 52-22 |
Target Group:
- Manufacturers of adhesives and coatings
- Pharmaceutical companies for tablet coatings
- Food and beverage companies for packaging and preservation purposes
- Paper and pulp industry for paper coatings
- Textile industry for sizing and finishing
- Construction industry for cement and mortar additives
Polyvinylalcohol Grade 25-88 Grade
Polyvinylalcohol Grade 25-88 Grade is a high-quality polymer that is widely used in the manufacturing industry. It is known for its excellent water solubility, adhesive properties, and film-forming ability. This product is commonly used in the production of adhesives, coatings, and textiles. Its unique properties make it an ideal choice for a wide range of applications. Polyvinylalcohol Grade 25-88 Grade is a versatile product that is sure to meet the needs of any manufacturing process.
Product Specifications:
| Product Name: | Polyvinylalcohol Grade 25-88 |
| Grade: | 25-88 |
Target Group:
- Manufacturers of adhesives and coatings
- Pharmaceutical companies for drug delivery systems
- Textile industry for sizing and finishing agents
- Paper industry for paper coatings
- Cosmetic industry for hair and skin care products
- Film industry for water-soluble packaging materials
Polyvinyl Alcohol 49-88 (PVOH 49-88, Elvanol 50-42)
Polyvinyl Alcohol 49-88 (PVOH 49-88) is a high-viscosity, partially hydrolyzed polymer, notable for its strength and versatility. It dissolves effectively in cold water, optimal for stabilizing emulsions and diverse industrial applications. Commonly used in adhesives, coatings, and slime making.
Key Features
- High viscosity at 49 cps for a 4% solution
- Partially hydrolyzed (88%) for improved performance
- Effective in cold water dissolution
- Stabilizes vinyl acetate, polystyrene, and PVC emulsions
- Applications in adhesives, coatings, and slime making
Product Specifications
| Viscosity | 49 cps (4% Solution) |
| Hydrolysis | 88% Partial |
| Solubility | Cold Water Soluble |
| Applications | Adhesives, Coatings, Slime Making |
| Stabilization Use | Vinyl Acetate, Polystyrene, PVC |
Similar Products
- Water-soluble, high-strength polymer film
- Cold-water soluble, adhesive binder
- Hydrolyzed, viscosity-enhancing polymer
- Industrial-grade, emulsion stabilizer
- Versatile, photosensitive coating agent
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Industrial chemical manufacturers, Adhesive and coating producers, Textile and construction materials companies, Personal care and cosmetic formulators, Educational and recreational slime makers
Potassium Iodide 99% USP
Potassium Iodide 99% USP is a granular, high-purity compound suitable for laboratory, industrial, research, and educational purposes. It is USP-grade, ensuring compliance with stringent quality standards. Commonly used in the production of potassium iodide tablets, each pound of this compound can yield over 3,000 daily adult doses of 135 mg. With a purity of 99.0–101.5% on a dried basis, Potassium Iodide exhibits excellent stability and meets or exceeds all assay requirements. It has a pH of 6.4 in a 5% solution and minimal impurities, including iodates (<0.0004%) and heavy metals (<4 mg/kg). This versatile compound is repacked from larger containers to meet customer needs and is available with a Certificate of Analysis upon request for orders of 55-lb bags or more.
Key Features
- 99.0–101.5% purity (dried basis)
- Ideal for laboratory, industrial, and research applications
- Meets USP-grade quality standards
- Low impurity levels: iodates <0.0004%, heavy metals <4 mg/kg
- Produces over 3,000 daily adult doses per pound
- Certificate of Analysis available for bulk orders
Product Specifications
| Chemical Name | Potassium Iodide |
| CAS Number | 7681-11-0 |
| Chemical Formula | KI |
| Purity | 99.0–101.5% (dried basis) |
| pH (5% solution) | 6–10 |
| Applications | Tablet production, laboratory, research, industrial uses |
Perfect for pharmaceutical, laboratory, and emergency preparedness applications.
- 1