Advanced Search Results
Refine your search by using the category filter.
Spring Steel Wire Test Tube Clamp
Wire-form structure made from plated spring steel with self-closing jaws and integrated finger grip actuation. Jaw alignment is maintained using a wire collar to minimize lateral displacement.
Product Specifications
| Material | Plated Spring Steel Wire |
| Geometry | Wire-form structure with self-closing jaws and integrated finger grip actuation |
| Jaw Alignment | Maintained via wire collar |
| Overall Length | 160 mm ~ 6.3 inches |
| Minimum Jaw Opening | 0.6 mm ~ 0.02 inches |
| Maximum Jaw Opening | 75 mm ~ 3 inches |
| Recommended Test Tube OD Range | 15 mm to 25 mm ~ 0.6 inches to 1 inch |
| Clamping Mechanism | Manual, via integrated finger grips and spring, self-closing jaws |
Applications and Benefits:
- Secure handling of test tubes during laboratory experiments
- Prevents lateral displacement with reliable jaw alignment
- Corrosion resistance ensures durability in wet environments
- Easy manual operation with finger grips
- Adjustable jaw opening suits a wide range of test tube sizes
Caution:
Ensure compatibility with test tube diameter to avoid breakage. Do not use near open flames unless verified heat-resistant.
Wire Form Test Tube Holder with Finger Grip
The Wire Form Test Tube Holder with Finger Grip is a must-have tool for any laboratory. This holder is perfect for securely holding test tubes during experiments and procedures. Its unique wire form design with finger grip allows for easy and comfortable handling, minimizing the risk of dropping or spilling the test tubes. Made with high-quality materials, this test tube holder is durable and long-lasting. Whether you're a professional scientist or a student, the Wire Form Test Tube Holder with Finger Grip is an essential tool for any laboratory.
Product Specifications:
| Product Name | Test Tube Holder |
| Material | Wire Form |
| Type | Finger Grip Holder |
| Compatibility | Test Tubes |
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: This test tube holder is made of wire and may have sharp edges. Handle with care to avoid injury.
Perfect for:
- Laboratory technicians
- Science students
- Research scientists
- Medical professionals
- Chemistry enthusiasts
- Biologists
U-Shaped Drying Tubes
The U-Shaped Drying Tubes, 175Mm X 20Mm, are a must-have for any home or professional laboratory. These tubes are used to house a disposable solid desiccant and require rubber stoppers with a hole on each end for connecting in and out gas tubes or air tubes. The drying tube is perfect for drying gases with granular desiccants, which are water absorbent chemicals. Made of borosilicate glass, this drying tube can be placed in direct flame for heating. The tooled ends for stoppers make it easy to use, and the "U" shape design makes it a space-saving option. With a length of 175mm and an outer diameter of 20mm, these tubes are versatile and efficient.
Key Features:
- U-shaped design for easy connection with gas or air tubes
- Made of durable borosilicate glass
- Can be placed in direct flame for heating
- Perfect for drying gases with granular desiccants
- Tooled ends for rubber stoppers
- Suitable for use in home or professional laboratories
Product Specifications:
| Product Name | U-Shaped Drying Tubes |
| Dimensions | 175mm x 20mm |
| Material | Borosilicate Glass |
| Usage | To house a disposable solid desiccant and dry gases with granular desiccants |
| Features | Can be placed in direct flame for heating, tooled ends for stoppers, "U" shaped |
Similar Products
- Borosilicate Glass Drying Tubes, U-Shaped, 200mm x 25mm
- Disposable Desiccant Drying Tubes, Straight, 150mm x 15mm
- Granular Desiccant Drying Tubes, T-Shaped, 250mm x 30mm
- Reusable Glass Drying Tubes, S-Shaped, 180mm x 20mm
- Chemical Drying Tubes, V-Shaped, 190mm x 22mm
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: This U-shaped drying tube should only be placed in direct flame for heating with caution. Make sure to use rubber stoppers with holes on each end for connecting in and out gas tubes or air tubes. Avoid contact with water or any other liquids that may cause the desiccant to become ineffective. Handle with care to avoid breakage.
Perfect for:
- Professional laboratories
- Home laboratories
- Chemists
- Scientists
- Researchers
- Students studying chemistry or science
Wooden Test Tube Clamp
If you're looking for a reliable and eco-friendly way to hold your test tubes, our Wooden Test Tube Clamp is the perfect solution. Made from high-quality wood, this clamp is designed to securely hold test tubes of various sizes, preventing them from slipping or tipping over. Its natural wooden finish adds a touch of rustic charm to your laboratory or workspace.
Our Wooden Test Tube Clamp is not only functional, but also aesthetically pleasing. It's a great addition to any science classroom or laboratory, and can be used for a variety of experiments and tests. Plus, its durable construction ensures that it will last for years to come.
Product Specifications:
| Product Name: | Wooden Test Tube Clamp, Test Tube Holder Clamp |
| Material: | Wooden |
| Type: | Holder |
| Compatibility: | Wooden Test Tube Clamp, Test Tube Holder |
Perfect for:
- Science teachers and educators
- Chemistry and biology students
- Laboratory technicians and researchers
- Home science experiment enthusiasts
- DIY science project makers
- Science fair participants
Similar Products
- Wooden Test Tube Rack
- Plastic Test Tube Clamp
- Metal Test Tube Holder
- Acrylic Test Tube Stand
- Stainless Steel Test Tube Rack
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: This product is not suitable for use with corrosive or hazardous chemicals. Please handle with care and follow all safety guidelines when using.
- 1