Advanced Search Results
Refine your search by using the category filter.
Copper Granules, Mesh 20 (Coarse Copper Powder)
Coarse copper powder made of solid metallic copper metal. Particles are nearly equal in size, appearing as metallic spherical crystals. Recommended for wood inlay, art, and industrial applications requiring solid round multi-side balls. Granular copper is also used in laboratories for sulfur removal from environmental samples.
Product Specifications
| Copper | 98% |
| Apparent Density | 5.29 g/cc |
| Sieve Analysis (Typical) | +20 mesh: 0% -20/+30 mesh: 100% -30/+40 mesh: 0.0% -40 mesh: 0.0% |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Wood inlay projects
- Artistic applications
- Industrial uses requiring solid multi-side balls
- Sulfur removal from environmental samples in laboratories
Caution:
Handle with appropriate safety measures. Refer to the SDS for detailed safety guidelines.
Copper Powder 99.3%, General Purpose, 150 Mesh
The most popular and widely used copper powder, produced by the water atomization method followed by hydrogen reduction. This general-purpose copper powder has diverse applications, including the production of copper compounds, use as a catalyst in chemical formulations, abrasive wheels, carbon brushes, and more. It is important to note that pure copper powders may not exhibit continuity or conductivity under low-voltage multimeter tests due to air gaps and weak particle contacts but will show conductivity under higher voltage, when compacted, or mixed with oils/resins to form a paste.
Product Specifications
| Purity | 99.3% |
| Apparent Density | 2.7 g/cc |
| Nominal Mesh | -140 |
| -325 Mesh Ratio | > 50% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Production of copper compounds
- Catalyst in chemical formulations
- Abrasive wheels
- Carbon brushes
- Electronics and electrical applications
- Decorative and protective coatings
- Brazing and general-purpose industrial use
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder 99.3%, Mesh 325
Ultra-fine, high-purity copper powder made via water atomization and hydrogen reduction. Features spheroidal particles and clusters, offering higher conductivity and lower density. Suitable for metal injection molding and applications requiring high conductivity and purity. Typical applications include conductive inks, paints, pastes, thermal sprays, and sintered products. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will show conductivity when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.31% |
| Hydrogen Loss | 0.39% |
| Apparent Density | 2.97 g/cc |
| Mesh Size | 325 mesh |
| Sieve Analysis |
+60 Mesh: 0% -60/+80 Mesh: 0% -80/+100 Mesh: 0% -100/+140 Mesh: Trace -140/+200 Mesh: Trace -200/+325 Mesh: 0.6% -325 Mesh: 99.4% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Conductive inks, paints, and pastes
- Injection molding
- Thermal management
- EDM electrodes
- Antifouling paints
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder 99.8%, Electronic Grade, Mesh 325
Electronic grade, high-purity copper powder made via water atomization and hydrogen reduction. Features ultra-fine, spheroidal particles with high conductivity and low density. Recommended for a variety of applications where conductivity is crucial, including thick and thin film pastes, capacitor chips, and thermal sprays. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will conduct when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.85% |
| Hydrogen Loss | 0.19% |
| Apparent Density | 2.97 g/cc |
| Mesh Size | 325 mesh |
| Sieve Analysis | +60 Mesh: 0% -60/+80 Mesh: 0% -80/+100 Mesh: 0% -100/+140 Mesh: Trace -140/+200 Mesh: Trace -200/+325 Mesh: 0.6% -325 Mesh: 99.4% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Capacitor chips
- End cap terminators
- Conductive inks, paints, and pastes
- Injection molding
- Electronics
- Thermal management
- EDM electrodes
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Iron Powder, Ultra Pure 99.5%
High-purity fine iron powder made of high-purity iron by the water atomization method. Features an apparent density of >2.8 g/cc with a medium particle size distribution. Suitable for various applications requiring ultra-pure iron.
Product Specifications
| Apparent Density | 3 g/cc |
| HTS# | 7205.21.0000 |
| CAS# | 7439-89-6 |
| Sieve Analysis | +212 µm: 0% 180–212 µm: 2% 150–212 µm: 12% -45 µm: 10–30% |
Chemical Analysis (Typical)
| Fe | 99.5% |
| O-tot | 0.12% |
| C | 0.003% |
| S | 0.010% |
| P | 0.01% |
Applications and Benefits:
- High-purity requirements for industrial or scientific uses
- Applications requiring medium particle size distribution
- Water atomized iron suitable for precise manufacturing
Caution:
Handle in accordance with safety guidelines. Refer to SDS for details.
Tin Powder, 99.5%
Tin Powder, 99.5% is a high quality, pure tin powder that is commonly used in a variety of industries, including electronics, metallurgy, and chemical manufacturing. This powder is made up of tiny particles that are 99.5% pure tin, making it an excellent choice for applications that require high levels of purity and consistency. Tin Powder, 99.5% is also known for its excellent conductivity and resistance to corrosion, making it a popular choice for use in electrical components and other applications where durability and reliability are key. Whether you're looking for a reliable powder for your manufacturing processes or simply need a high-quality, pure tin powder for your projects, Tin Powder, 99.5% is an excellent choice.
Product Specifications
| Product Name | Tin Powder |
| Purity | 99.5% |
| Form | Powder |
| Molecular Weight | 118.71 g/mol |
Applications and Benefits:
- Manufacturers of tin-based alloys
- Electronics manufacturers
- Chemical laboratories
- Metal fabricators
- Research and development departments
- Industrial engineers
Caution:
Ensure proper storage and handling practices are followed. Use appropriate protective equipment. Confirm suitability for your specific application before use.
- 1