Advanced Search Results
Refine your search by using the category filter.
High-purity, high-density spherical copper powder for enhanced conductivity and versatility.
Copper Powder CU112SP
CU112SP is a super fine, high density, high purity spherical copper powder that provides high heat conductivity and electrical conductivity properties to your products.
Our specification guarantees that at least 95% of this powder are particles smaller than 44 micron. A typical analysis however shows that 99.9% of particles are smaller than 44 micron. Most particles are between 10 micron and 22 micron.
HTS Code: 7406.10.0000.
NMFC: 30743
CAS: 7440-50-8
Applications include cold casting, 3-D printer filaments, metal clay, sintering, Green/ blue patina and rust effect, preventing mold in concrete, plaster,dry-wall, paint, adhesives and grout.
Also used in 3D printing process known as Selective Powder Deposition (SPD)
Old product code: CU155A
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features
- Super fine, spherical particles
- High density and purity
- Excellent thermal and electrical conductivity
- Consistent particle size distribution
- Versatile applications in industry and art
Product Specifications
| Particle Size | 95% < 44 microns |
| Purity | > 99.2% Copper |
| Apparent Density | 4.5 - 5.5 g/cc |
| Hydrogen Loss | < 0.7% |
| Mesh Passing | 99.9% through 325 (44 micron) |
Similar Products
- Fine silver powder, high conductivity
- Spherical bronze powder, 3D printing
- Fine aluminum powder, thermal conductivity
- High-purity zinc powder, corrosion resistance
- Spherical titanium powder, lightweight strength
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for 3D Printing Enthusiasts, Industrial Manufacturers, Electronics Professionals, Artists and Sculptors, Construction Material Suppliers
Ball And Ring, Demonstrating Thermal Expansion Chain
The Ball And Ring demonstrator is a unique product that showcases thermal expansion and chain reactions, helping students understand the concept of thermal expansion by demonstrating the expansion of the ball and ring when heated. The chain expansion is also demonstrated by the expansion of the chain that connects the ball and ring. This product is for educational purposes and can be used in classrooms, labs, or at home, providing an interactive and engaging way to learn about physics and STEM concepts.
Product Specifications
| Product Name | Ball And Ring |
| Demonstrates | Thermal Expansion, Chain Expansion |
| Materials | Brass (Ball and Ring), Steel (Chain) |
| Ball Diameter | 20 mm |
| Ring Inner Diameter | 30 mm |
| Weight | 185 gr |
| Packaging | Individual packaging |
Applications and Benefits
- For educational purposes, such as classrooms, labs, or at home, providing an interactive and engaging way to learn about physics and STEM concepts
- Helps students understand physics and STEM concepts, including thermal expansion, chain reactions, and heat transfer
- for science teachers, students studying thermal expansion, physics enthusiasts, STEM educators, science museums, science centers, and home-schooling parents
Key Features and Benefits
- Demonstrates thermal expansion and chain reactions, providing a unique and interactive way to learn about physics and STEM concepts
- Compact and easy to use, making it for classrooms, labs, or at home
- Made of durable materials, including brass and steel, ensuring longevity and reliability
Caution:
This product involves heat. Please follow safety instructions carefully and use with adult supervision.
Cast Iron Powder, Thermal Spray
Cast iron powder used in the manufacturing of specialty alloys and as an ingredient in pyrotechnic mixtures. Also suitable for thermal spray applications, with recommendations to consider S1001 and S145C for such purposes. Engineered for industrial use with high metallic iron content and controlled granulation.
Product Specifications
| Metallic Iron | >90% |
| Total Carbon | 2.85% |
| Manganese | <1.0% |
| Silicon | <3.0% |
| Chromium | <1.0% |
| Granulation | Passing 20 mesh: 95-100%, Passing 100 mesh: 1% Max. |
Applications and Benefits:
- Manufacturing of specialty alloys
- Ingredient in pyrotechnic mixtures
- Thermal spray applications
- High iron content for industrial use
- Controlled granulation for specific needs
Caution:
Evaluate product suitability before large-scale use. For thermal spray applications, also consider S1001 and S145C. Store in a dry, cool place to maintain granulation and performance.
Copper Powder 99.5% - 99.9%
Ultra-fine, very high purity copper powder made via air atomization and hydrogen reduction. Features spherical particles with high conductivity and density. Recommended for diverse applications, including thick and thin film pastes, capacitor chips, end cap terminators, and thermal sprays. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will show conductivity when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.81% |
| Iron | 0.01% |
| Hydrogen Loss | 0.18% |
| Apparent Density | 4.89 g/cc |
| Sieve Analysis | +200 Mesh: 0% -200/+325 Mesh: 4.8% -325 Mesh: 95.2% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Capacitor chips
- End cap terminators
- Conductive inks, paints, and pastes
- Injection molding
- Electronics
- Thermal management
- EDM electrodes
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
For MSDS Go to Downloads TabCU118SP Copper Powder, Fine, Spherical
Our specification guarantees that at least 80% of this powder are particles smaller than 44 micron. A typical analysis however shows that 88% of particles are smaller than 44 micron. Most particles are between 16 micron and 28 micron.
Applications include cold casting, 3-D printer filaments, metal clay, sintering, Green/ blue patina and rust effect, preventing mold in concrete, plaster,dry-wall, paint, adhesives and grout.
Also used in 3D printing process known as Selective Powder Deposition (SPD)
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features:
- High-purity, high-density spherical copper powder
- Provides high heat conductivity and electrical conductivity
- Suitable for various applications, including cold casting, 3-D printer filaments, metal clay, sintering, green/blue patina and rust effect, preventing mold in concrete, plaster, dry-wall, paint, adhesives, and grout
- Used in the 3D printing process known as Selective Powder Deposition (SPD)
- Particle size distribution with 88% of particles smaller than 44 micron
Product Specifications:
| Copper Purity | Over 99.5% |
| Hydrogen Loss | Less than 0.7% |
| Apparent Density | 4.5-5.5 g/cc |
| Typical Analysis | Copper > 99.5% Hydrogen Loss < 0.7% Apparent Density, g/cc: 4.5 - 5.5 Passing mesh 325 (44 micron): 80% ~ 88% |
Similar Products:
- Ultra-Fine Copper Powder
- High-Purity Copper Foil
- Copper Wire
- Copper Rod
- Copper Sheet
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for enhanced conductivity and versatility applications, including cold casting, 3-D printing, metal clay, and more.
For MSDS Click or Go to Downloads TabHighly pure (>99%) electrolytic copper in a granular form, Copper Filings are versatile for various industrial, chemical, and artistic applications. Mesh 25 - 325 suitable for electrical and thermal conductivities.
Key Features
- Highly pure electrolytic copper
- Excellent electrical and thermal conductivities
- Versatile mesh size from 25 - 325
- Useful in a wide range of applications
- Effective for coatings, brazing, and soldering
Product Specifications
| Material | Copper >99% Purity |
| Mesh Size | 25 - 325 |
| Form | Granular Mixed Grain |
| Applications | Electrical, Mechanical, Decorative |
Similar Products
- High conductivity copper mesh
- Electrical grade copper pellets
- Thermal conductive copper strips
- Fine copper powder for coating
- Brazing grade copper granules
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Electrical Engineers, Industrial Manufacturers, Artists and Craftsmen, Chemical Technicians, Medical Equipment Manufacturers
GR5 High Macro-Crystallinity Graphite Powder
GR5 is a premium natural flake graphite powder with a high degree of macro-crystallinity, boasting over 99% carbon content. Designed with flake-shaped particles, GR5 excels in thermal and electrical conductivity, making it ideal for various industries. It features low spring-back properties, enhancing its performance in applications such as molding and friction materials. GR5's versatility extends to powder metallurgy, batteries, fuel cells, refractories, lubricants, rubber compounds, pencils, gaskets, and polymer systems. Its purity ensures reliable performance across high-stress and specialized applications. Users are advised to handle with care and review the Material Safety Data Sheet (MSDS) for optimal use.
Key Features
- High macro-crystallinity ensures superior structural integrity
- 99% carbon content guarantees optimal purity
- Flake-shaped particles for easy application in manufacturing
- Exceptional thermal and electrical conductivity
- Low spring-back properties enhance performance in molding
- Versatile for multiple applications, including batteries, lubricants, and refractories
Product Specifications
| Carbon Content | 99% |
| Particle Shape | Flake |
| Apparent Density | 0.25 g/cc |
| CAS# Graphite | 7782-42-5 |
| CAS# Carbon | 7740-44-0 |
| SKU | GR5 |
Applications and Benefits:
- Powder metallurgy
- Batteries and fuel cells
- Refractories
- Lubricants
- Rubber compounds
- Pencils
- Gaskets
- Polymer systems
Caution:
Handle with care. The Material Safety Data Sheet (MSDS) must be reviewed for optimal use and safety precautions.
- 1