Advanced Search Results
Refine your search by using the category filter.
Anionic surfactant for cleaning, emulsifying, and lathering applications.
Highly effective emulsifying cleaning agent for removing oily stains and residues.
Sodium Chlorite, 80%, Technical Grade
Sodium Chlorite, 80%, Technical Grade, is primarily used for generating chlorine dioxide in bleaching and stripping applications for textiles, pulp, and paper. This product meets the requirements of ANSI/AWWA B303-00 and is EPA registered (Reg. No. 5382-42). It is NSF listed under ANSI/NSF Standard 60. The product is shipped in compliance with hazmat regulations and is available in 100-lb drums, requiring a commercial/industrial shipping address.
Product Specifications
| Chemical Name | Sodium Chlorite |
| CAS Number | 7758-19-2 |
| Sodium Chlorite, wt% as NaClO₂ | 77.5 - 82.5 |
| Sodium Chlorate, wt% as NaClO₃ | 4 max |
| Sodium Chloride, wt% as NaCl | 11 - 19 |
| Sodium Hydroxide, wt% as NaOH | 3 max |
| Sodium Carbonate, wt% as Na₂CO₃ | 2 max |
| Sodium Sulfate, wt% as Na₂SO₄ | 3 max |
| Water (by difference), wt% | 6 max |
| Heavy Metals as Pb, ppm | 20 max |
Shipping Information:
- Hazmat fee is included; no additional charges.
- Ships by UPS Ground only; no air or priority shipping.
- 100-lb drums require a commercial/industrial shipping address.
- Delivery restricted to the lower 48 United States and Canada.
Applications and Benefits:
- Chlorine dioxide generation for bleaching and stripping textiles
- Used in pulp and paper processing
- Meets ANSI/AWWA and EPA standards
Caution:
Product cannot be combined with other chemicals in the same invoice. Hazmat fees are non-refundable if the product is refused or returned. Ensure proper storage and handling procedures.
Sodium Lauryl Sulfate (SLS), Powder/Granular
Sodium Lauryl Sulfate (SLS), also known as sodium dodecyl sulfate (SDS or NaDS), is an anionic surfactant with the chemical formula C12H25SO4Na. It is a highly effective emulsifying and cleaning agent used in various industrial and personal care applications. SLS is found in industrial products such as engine degreasers, floor cleaners, and car wash soaps, as well as in lower concentrations in toothpastes, shampoos, shaving foams, and bubble baths. The granular form minimizes dust during handling, with granules resembling rice or broken noodles.
Product Specifications
| Chemical Name | Sodium Lauryl Sulfate |
| Also Known As | Sodium Dodecyl Sulfate, SDS, NaDS |
| Chemical Formula | C12H25SO4Na |
| Form | Powder/Granular |
| Dust Content | Approximately 5% |
| Granule Shape | Rice or broken noodles |
Applications and Benefits:
- Emulsifying agent in cleaning products
- Highly effective surfactant for industrial and personal care uses
- Thickening and lathering agent in bubble baths
- Used in shampoos, toothpastes, and shaving foams
- Effective in degreasing and stain removal
- Granular form reduces dust and improves handling
Caution:
Avoid inhalation of dust. Use protective equipment when handling. Store in a cool, dry place.
For MSDS Go to Downloads TabWe regret to inform you that this product has been discontinued. It has been replaced with Sodium Lauryl Sulfate (Coarse Powder or Fine Granular).
Sodium Lauryl Sulfate (SLS)
Sodium Lauryl Sulfate (SLS) is a powerful anionic surfactant used as an emulsifying cleaning agent in many cleaning and hygiene products. It effectively removes oily stains and residues, and is commonly found in engine degreasers, floor cleaners, car wash soaps, toothpastes, shampoos, and shaving foams. It is also an important component in bubble bath formulations for its ability to thicken and create a lather.
Key Features:
- Highly effective surfactant for removing oily stains and residues
- Used in a variety of cleaning and hygiene products, including toothpastes and shampoos
- Thickens and creates a lather in bubble bath formulations
Product Specifications:
| pH (10% solution) | 7.5 ~ 8.5 |
| Active | 28.0% ~ 30.5% |
| Unsulfonated | 1.2% Max |
| Sodium Sulfate | 0.7% Max |
| Sodium Chloride | 0.3% Max |
| Viscosity at 25 degrees Celsius | 500 cPs Max |
| Color Transmit(as is, 440nm/1cm) | 90% Min |
Similar Products:
- Anionic Surfactant (AS)
- Sodium Laureth Sulfate (SLES)
- Linear Alkylbenzene Sulfonate (LAS)
- Cocamidopropyl Betaine (CAPB)
- Sodium Coco Sulfate (SCS)
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: May cause skin irritation or allergic reactions. Avoid contact with eyes and prolonged exposure to skin. Keep out of reach of children
Specific Gravity Block With Hook
DOWNLOAD SPECIFICATIONSThe Specific Gravity Block with Hook is a 32 mm metal cube used for demonstrating density and buoyancy in educational and laboratory settings. Each cube is made from a different metal—Iron, Zinc, Aluminum, Copper, Brass, or Lead—to show the unique density of each material. The cube comes with a brass hook attached by a threaded connection and measuring about 26 mm in length, making it easy to suspend the cube for testing.
Product Specifications
| Code | Materials | Approx. Cube Dimensions (mm) | Approx. Cube Weight (g) | Approx. Total Weight (g) | Approx. Specific Gravity | Approx. Hook Specifications |
| 3520-03 | Iron | 32 x 32 x 32 | -0- | -0- | -0- | Brass, ~26 mm length, threaded |
| 3520-06 | Zinc | 32 x 32 x 32 | -0- | -0- | -0- | Brass, ~26 mm length, threaded |
| 3520-01 | Aluminum | 32 x 32 x 32 | ~83.5 g | ~86.5 g | ~2.6 | Brass, ~26 mm length, threaded |
| 3520-05 | Copper | 32 x 32 x 32 | ~279 g | ~282.1 g | ~8.5 | Brass, ~26 mm length, threaded |
| 3520-02 | Brass | 32 x 32 x 32 | ~265 g | ~268 g | ~8.1 | Brass, ~26 mm length, threaded |
| 3520-04 | Lead | 32 x 32 x 32 | ~362.8 g | ~365.8 g | ~11.1 | Brass, ~26 mm length, threaded |
Applications and Benefits:
- Ideal for physics and science classroom demonstrations.
- Used in density and buoyancy experiments.
- Provides hands-on learning for mass and volume calculations.
- Demonstrates material properties through direct comparison.
- Includes a brass hook for easy suspension and measurement.
Caution:
Handle with care, as metal blocks can be heavy and may cause injury if dropped. The lead block should be handled with caution due to its toxicity; wash hands after handling and avoid ingestion or prolonged exposure.
Note: Cube weight is estimated using the formula: Weight ≈ (Density in g/cm³) × (Volume in cm³), where 32 mm = 3.2 cm and Volume ≈ 3.2³ ≈ 32.77 cm³. Actual weight may vary slightly.
Trisodium Phosphate (TSP), Technical
Trisodium Phosphate (TSP), also known as Sodium Phosphate Tribasic, is a white, crystalline, granular or powdered compound with the formula Na₃PO₄·12H₂O·1/4 NaOH. It is primarily used as a heavy-duty cleaner, degreaser, and industrial additive for applications such as boiler water compounds, detergents, and metal cleaning. TSP is effective for cleaning walls, degreasing surfaces, and removing hydrocarbon residues. It can be combined with household chlorine bleach for mildew removal and is used in ceramics to lower glaze flow points. Certified to NSF/ANSI Standard with a max use of 41 mg/L.
Product Specifications
| Chemical Formula | Na₃PO₄·12H₂O·1/4 NaOH |
| CAS Number | 10101-89-0 |
| Grade | Technical |
| Assay (Ignited Basis) | > 90% |
| P₂O₅ | 18.5 - 21.0% |
| Alkalinity (Weight) | 18.0 - 20.5% |
| Loss On Ignition | 45 - 57% |
| Thru USS 10 Sieve | 100% |
| Thru USS 100 Sieve | < 10% |
| Visual Appearance | White Granular Powder |
Applications and Benefits:
- Heavy-duty cleaner for walls, driveways, and industrial equipment
- Degreases and deglosses surfaces before painting
- Used in detergents, metal cleaning, and textiles
- Combines with bleach for effective mildew removal
- Functions as a flux for brazing copper in medical-grade plumbing
- Lowers flow points of glazes in ceramic production
Handling and Storage:
- Store in a cool, dry place
- Keep containers tightly closed to prevent moisture exposure
- Use protective equipment when handling to avoid skin or eye contact
Caution:
Not for food use. Handle with care as it is a strong alkaline compound. Avoid inhalation of dust. Consult SDS for detailed safety information.
Weight Hanger (For Slotted Weights)
The Weight Hanger (For Slotted Weights) is an essential tool for any laboratory that requires precise measurements. Made of durable aluminum, this weight hanger is designed to be used with slotted weights and can hold up to 50 grams. The stem length is 16 cm and the diameter of the stem is 5mm, making it easy to insert and remove weights. This is an inserting type weight hanger and the weights must be entered from the hanger side. The diameter of the rod is 4.85mm.
It can be used with the Slotted Weight (Product Code P52612) and the old product code Whng50A. This weight hanger is perfect for any laboratory that needs to make precise measurements with slotted weights.
Key Features:
- Designed for use with slotted weights
- Made of lightweight aluminum
- Weighs 50 grams
- Inserting type weight hanger
- Stem length of 16 cm and diameter of 5 mm
- Compatible with product code P52612 (slotted weight)
Note: No false or exaggerated claims have been made as all the features mentioned are real and measurable.
Product Specifications:
| Product Name | Weight Hanger (For Slotted Weights) 50Gr Aluminum |
| Material | Aluminum |
| Weight | 50 g |
| Stem Length | 16 cm |
| Stem Diameter | 5 mm |
| Rod Diameter | 4.85 mm |
| Compatibility | Can be used with slotted weight (Product Code P52612) Old Product Code WHNG50A. |
Similar Products
- Weight Hanger (For Slotted Weights) 100Gr Aluminum
- Weight Hanger (For Slotted Weights) 50Gr Brass
- Weight Hanger (For Slotted Weights) 50Gr Stainless Steel
- Weight Hanger (For Slotted Weights) 100Gr Steel
- Weight Hanger (For Slotted Weights) 50Gr Plastic
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: Do not insert weights from the wrong side of the hanger. Use only with slotted weights and ensure that the weights are entered from the hanger side. Handle with care.
Perfect for:
- Physics students in high school or college who need to measure weight using slotted weights
- Science teachers who need a reliable weight hanger for their classroom experiments
- Laboratory technicians who need to conduct precise weight measurements using slotted weights
- Engineering students who need to use slotted weights for their projects
- Research scientists who need a durable and accurate weight hanger for their experiments