Advanced Search Results
Refine your search by using the category filter.
High-density spherical bronze for specialized industrial applications.
High-purity, high-density spherical copper powder for enhanced conductivity and versatility.
Precision 50-mesh iron pellets for safe pyrotechnic and training rounds.
Aluminum Powder (Fine Dust)
Super fine aluminum dust with spherical particles, D50 is 5 microns. Suitable for industrial and laboratory applications.
Product Specifications
| Particle Shape | Spherical |
| D50 Particle Size | 5 Microns |
| Applications | Industrial, Laboratory |
Applications and Benefits:
- Used in industrial processes requiring fine aluminum powder.
- Suitable for laboratory experiments and research.
- High-quality spherical particles ensure uniformity.
Caution:
Handle with care. Avoid inhalation and contact with open flames or sparks.
Copper Powder 99.5% - 99.9%
Ultra-fine, very high purity copper powder made via air atomization and hydrogen reduction. Features spherical particles with high conductivity and density. Recommended for diverse applications, including thick and thin film pastes, capacitor chips, end cap terminators, and thermal sprays. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will show conductivity when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.81% |
| Iron | 0.01% |
| Hydrogen Loss | 0.18% |
| Apparent Density | 4.89 g/cc |
| Sieve Analysis | +200 Mesh: 0% -200/+325 Mesh: 4.8% -325 Mesh: 95.2% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Capacitor chips
- End cap terminators
- Conductive inks, paints, and pastes
- Injection molding
- Electronics
- Thermal management
- EDM electrodes
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Dark Copper Powder 99.5% - 99.9%
Ultra-fine, very high purity copper powder made via air atomization and hydrogen reduction. Features spherical particles with high conductivity and density. Recommended for diverse applications, including thick and thin film pastes, capacitor chips, end cap terminators, and thermal sprays. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will show conductivity when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.81% |
| Iron | 0.01% |
| Hydrogen Loss | 0.18% |
| Apparent Density | 4.89 g/cc |
| Sieve Analysis | +200 Mesh: 0% -200/+325 Mesh: 4.8% -325 Mesh: 95.2% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Capacitor chips
- End cap terminators
- Conductive inks, paints, and pastes
- Injection molding
- Electronics
- Thermal management
- EDM electrodes
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder CU112SP
CU112SP is a super fine, high density, high purity spherical copper powder that provides high heat conductivity and electrical conductivity properties to your products.
Our specification guarantees that at least 95% of this powder are particles smaller than 44 micron. A typical analysis however shows that 99.9% of particles are smaller than 44 micron. Most particles are between 10 micron and 22 micron.
HTS Code: 7406.10.0000.
NMFC: 30743
CAS: 7440-50-8
Applications include cold casting, 3-D printer filaments, metal clay, sintering, Green/ blue patina and rust effect, preventing mold in concrete, plaster,dry-wall, paint, adhesives and grout.
Also used in 3D printing process known as Selective Powder Deposition (SPD)
Old product code: CU155A
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features
- Super fine, spherical particles
- High density and purity
- Excellent thermal and electrical conductivity
- Consistent particle size distribution
- Versatile applications in industry and art
Product Specifications
| Particle Size | 95% < 44 microns |
| Purity | > 99.2% Copper |
| Apparent Density | 4.5 - 5.5 g/cc |
| Hydrogen Loss | < 0.7% |
| Mesh Passing | 99.9% through 325 (44 micron) |
Similar Products
- Fine silver powder, high conductivity
- Spherical bronze powder, 3D printing
- Fine aluminum powder, thermal conductivity
- High-purity zinc powder, corrosion resistance
- Spherical titanium powder, lightweight strength
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for 3D Printing Enthusiasts, Industrial Manufacturers, Electronics Professionals, Artists and Sculptors, Construction Material Suppliers
Silver Powder, Fine Spheres, >99%
Fine silver powder with spherical particles, 3-8 microns in size, and >99% purity. Suitable for alloy production, chemical applications, silver clay, specialty ceramics, conductive gasket seals, and conductive pastes.
Product Specifications
| Purity | >99% |
| Particle Shape | Spherical |
| Particle Size | 3-8 microns |
Applications and Benefits:
- Alloy production for various industries.
- Used in specialty ceramics manufacturing.
- Essential for silver clay creations.
- Forms conductive gasket seals.
- Perfect for conductive pastes and coatings.
- Applicable in chemical processes requiring high-purity silver.
Bronze Powder, Filter Grade 25
Bronze Powder, Filter Grade 25 (BZ25P) is a spherical particle bronze developed for the high-reliability metallic filter market. This fully alloyed material features a closely controlled particle size range of -200+325, making it adaptable to an expanding range of industrial applications.
Product Specifications
| Product Code | BZ25P |
| Particle Shape | Spherical |
| Particle Size Range | -200 +325 mesh |
| Primary Applications | Filters, friction components, cold casting, welding |
Applications and Benefits:
- High-reliability metallic filtration systems
- Resin-bonded friction components
- Decorative applications, including cold casting
- Welding and brazing materials
- Diamond tooling applications
- Surface engineering processes
- Steel-backed bearings (bi-metal strip)
- Bronze-filled PTFE for hydraulic seals
Caution:
Handle with care and follow safety guidelines as detailed in the SDS. Ensure suitability for the intended application before use.
Bronze Powder, Spherical, Light
Prealloyed high-density spherical bronze powder is designed for specialized applications such as flame-spraying, brazing, strip bearings, metal-bonded grinding wheels, cutting tools, and metal injection molding (MIM). It is also suitable for resin-bonded friction components, decorative cold casting, surface engineering, filters, and hydraulic seals.
Product Specifications
| Chemical Composition | Copper: 89.7% Tin: 10% Phosphorous: 0.3% |
| Apparent Density | 5 g/cc |
| Particle Shape | Spherical |
| Sieve Analysis (% Weight) | +100 mesh: 0% -100/+140: 0% -140/+200: 0.1% -200/+325: 2.8% -325: 97.1% |
Applications and Benefits:
- Flame-spraying applications
- Brazing and welding materials
- Strip bearings
- Metal-bonded grinding wheels
- Cutting tools
- Metal injection molding (MIM)
- Decorative applications, including cold casting
- Resin-bonded friction components
- Surface engineering
- Filters and hydraulic seals
Caution:
Handle with care and follow safety guidelines as detailed in the SDS. Ensure suitability for the intended application before use.
For MSDS Go to Downloads TabCU118SP Copper Powder, Fine, Spherical
Our specification guarantees that at least 80% of this powder are particles smaller than 44 micron. A typical analysis however shows that 88% of particles are smaller than 44 micron. Most particles are between 16 micron and 28 micron.
Applications include cold casting, 3-D printer filaments, metal clay, sintering, Green/ blue patina and rust effect, preventing mold in concrete, plaster,dry-wall, paint, adhesives and grout.
Also used in 3D printing process known as Selective Powder Deposition (SPD)
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features:
- High-purity, high-density spherical copper powder
- Provides high heat conductivity and electrical conductivity
- Suitable for various applications, including cold casting, 3-D printer filaments, metal clay, sintering, green/blue patina and rust effect, preventing mold in concrete, plaster, dry-wall, paint, adhesives, and grout
- Used in the 3D printing process known as Selective Powder Deposition (SPD)
- Particle size distribution with 88% of particles smaller than 44 micron
Product Specifications:
| Copper Purity | Over 99.5% |
| Hydrogen Loss | Less than 0.7% |
| Apparent Density | 4.5-5.5 g/cc |
| Typical Analysis | Copper > 99.5% Hydrogen Loss < 0.7% Apparent Density, g/cc: 4.5 - 5.5 Passing mesh 325 (44 micron): 80% ~ 88% |
Similar Products:
- Ultra-Fine Copper Powder
- High-Purity Copper Foil
- Copper Wire
- Copper Rod
- Copper Sheet
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for enhanced conductivity and versatility applications, including cold casting, 3-D printing, metal clay, and more.
MicroShield Balanced Impact 50
MicroShield Balanced Impact 50 is crafted to deliver a controlled, safe balance of heat and dispersion for pyrotechnic and training purposes. Designed with 50 mesh-sized iron pellets, it provides non-lethal applications with optimized safety in controlled environments, ideal for training rounds and pyrotechnics. Composed of small, durable steel spheres approximately 0.1 mm in diameter, these pellets feature a low-carbon magnesium alloy, enhancing their durability while reducing the likelihood of unintended ignition. With an apparent density of 4.3 g/cc, this spherical steel powder is approximately 95% individual spheres, with the remaining particles being either spheroid or clusters of multiple spheres. Its uniform, dark gray color ensures easy identification, while its particle size ensures consistent performance for less-lethal use.
Key Features
- 50 mesh iron pellet size for optimal control
- Low carbon magnesium alloy for reduced ignition risk
- Approximately 95% spherical individual particles
- Dark gray color for easy visual identification
- Perfect balance of heat generation and particle dispersion
Product Specifications
| Material | Low carbon magnesium steel alloy |
| Mesh Size | 50 mesh |
| Average Particle Diameter | 0.1 mm |
| Apparent Density | 4.3 g/cc |
| Color | Dark gray |
| Application | Pyrotechnic & non-lethal training rounds |
Perfect for military trainers, pyrotechnic makers, and less-lethal ammunition suppliers.
utilizing iron particles at a 50 mesh size (approx. 0.297 mm). This configuration optimizes particle spread and retention of kinetic energy to create an effective and humane deterrent for birds over varying ranges. The 50 mesh iron particles offer an improved balance between energy retention and dispersion compared to finer powders, resulting in enhanced coverage without compromising safety.
These loads are structured across multiple shotgun gauges to suit diverse operational needs, whether for close-proximity deterrence or extended reach applications. To provide control over the spread and distance, each load type—light, standard, and heavy—uses calibrated powder charges, maintaining a wide dispersal pattern that maximizes effectiveness while minimizing the risk of harm. The table below details recommended specifications across different gauges:
Bird Deterrent Loads Using 50 Mesh Iron Particles Across Various Gauges
| Gauge | Load Type | Iron Particle Load | Powder Charge | Estimated Velocity | Effective Range |
|---|---|---|---|---|---|
| 12 Gauge | Light Deterrent | 20 g (0.71 oz) | 14-16 gr (0.32-0.37 oz) | 230-280 m/s (754-919 ft/s) | 10-20 meters (33-66 ft) |
| Standard Deterrent | 24 g (0.85 oz) | 16-18 gr (0.37-0.42 oz) | 280-330 m/s (919-1083 ft/s) | 20-30 meters (66-98 ft) | |
| Heavy Deterrent | 28 g (0.99 oz) | 18-20 gr (0.42-0.46 oz) | 330-380 m/s (1083-1247 ft/s) | 30-40 meters (98-131 ft) | |
| 16 Gauge | Light Deterrent | 15 g (0.53 oz) | 12-14 gr (0.27-0.32 oz) | 210-260 m/s (689-853 ft/s) | 10-20 meters (33-66 ft) |
| Standard Deterrent | 18 g (0.63 oz) | 14-16 gr (0.32-0.37 oz) | 260-310 m/s (853-1017 ft/s) | 20-30 meters (66-98 ft) | |
| Heavy Deterrent | 22 g (0.78 oz) | 16-18 gr (0.37-0.42 oz) | 300-350 m/s (984-1148 ft/s) | 30-40 meters (98-131 ft) | |
| 20 Gauge | Light Deterrent | 12 g (0.42 oz) | 10-12 gr (0.23-0.27 oz) | 200-250 m/s (656-820 ft/s) | 10-20 meters (33-66 ft) |
| Standard Deterrent | 15 g (0.53 oz) | 12-14 gr (0.27-0.32 oz) | 250-300 m/s (820-984 ft/s) | 20-30 meters (66-98 ft) | |
| Heavy Deterrent | 18 g (0.63 oz) | 14-16 gr (0.32-0.37 oz) | 300-350 m/s (984-1148 ft/s) | 30-40 meters (98-131 ft) | |
| 28 Gauge | Light Deterrent | 10 g (0.35 oz) | 8-10 gr (0.18-0.23 oz) | 190-240 m/s (623-787 ft/s) | 10-20 meters (33-66 ft) |
| Standard Deterrent | 12 g (0.42 oz) | 10-12 gr (0.23-0.27 oz) | 240-290 m/s (787-951 ft/s) | 20-30 meters (66-98 ft) | |
| Heavy Deterrent | 15 g (0.53 oz) | 12-14 gr (0.27-0.32 oz) | 290-340 m/s (951-1115 ft/s) | 30-40 meters (98-131 ft) |
Notes on Each Gauge:
- 12 Gauge: Best suited for moderate to heavy deterrent loads due to its higher capacity for both powder and particle loads, making it effective at longer ranges.
- 16 Gauge: A versatile option that offers a good balance between spread and range. Common in European hunting and bird deterrent contexts.
- 20 Gauge: Known for being lighter and easier to handle, making it suitable for closer-range deterrent applications.
- 28 Gauge: Ideal for short-range deterrent due to its lower recoil and capacity, typically for distances under 30 meters.
Important Considerations
- Testing and Customization: Load performance can vary based on powder type, shell type, and even environmental conditions. Testing in a controlled environment is essential.
- Safety First: Always consult a reloading manual and verify with experts, especially when using alternative materials like fine iron particles.
This table serves as a starting point; precise adjustments may be necessary depending on the equipment and specific needs. For more details on load specifications, consult reputable reloading sources or professional guidance.
- 1