Advanced Search Results
Refine your search by using the category filter.
High-density spherical bronze for specialized industrial applications.
High-purity, high-density spherical copper powder for enhanced conductivity and versatility.
Light yellow-amber rosin flakes from Pinus Elliottii for versatile uses.
Copper Granules, Mesh 20 (Coarse Copper Powder)
Coarse copper powder made of solid metallic copper metal. Particles are nearly equal in size, appearing as metallic spherical crystals. Recommended for wood inlay, art, and industrial applications requiring solid round multi-side balls. Granular copper is also used in laboratories for sulfur removal from environmental samples.
Product Specifications
| Copper | 98% |
| Apparent Density | 5.29 g/cc |
| Sieve Analysis (Typical) | +20 mesh: 0% -20/+30 mesh: 100% -30/+40 mesh: 0.0% -40 mesh: 0.0% |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Wood inlay projects
- Artistic applications
- Industrial uses requiring solid multi-side balls
- Sulfur removal from environmental samples in laboratories
Caution:
Handle with appropriate safety measures. Refer to the SDS for detailed safety guidelines.
Bronze Powder, Spherical, Light
Prealloyed high-density spherical bronze powder is designed for specialized applications such as flame-spraying, brazing, strip bearings, metal-bonded grinding wheels, cutting tools, and metal injection molding (MIM). It is also suitable for resin-bonded friction components, decorative cold casting, surface engineering, filters, and hydraulic seals.
Product Specifications
| Chemical Composition | Copper: 89.7% Tin: 10% Phosphorous: 0.3% |
| Apparent Density | 5 g/cc |
| Particle Shape | Spherical |
| Sieve Analysis (% Weight) | +100 mesh: 0% -100/+140: 0% -140/+200: 0.1% -200/+325: 2.8% -325: 97.1% |
Applications and Benefits:
- Flame-spraying applications
- Brazing and welding materials
- Strip bearings
- Metal-bonded grinding wheels
- Cutting tools
- Metal injection molding (MIM)
- Decorative applications, including cold casting
- Resin-bonded friction components
- Surface engineering
- Filters and hydraulic seals
Caution:
Handle with care and follow safety guidelines as detailed in the SDS. Ensure suitability for the intended application before use.
Citric Acid 99.5%, Fine Crystals, Food Grade
Citric Acid, anhydrous, USP, FCC, food grade. Widely used in the preparation of citrates, flavoring extracts, confections, and soft drinks. Functions as an acidifier, dispersing agent, and antioxidant in foods. Additional uses include water conditioning, detergent building, and cleaning or polishing stainless steel and other metals. Combustible but non-toxic. Very soluble in water and alcohol. CAS # [77-92-9], C6H8O7.
Product Specifications
| CAS Number | 77-92-9 |
| Chemical Formula | C6H8O7 |
| Grade | Food Grade (USP, FCC) |
| Synonyms | Beta-hydroxytricarballylic acid, Citralite, Hydroxytricarballylic acid |
| Solubility | Very soluble in water and alcohol |
Applications and Benefits:
- Preparation of citrates
- Flavoring extracts and confections
- Soft drinks acidifier
- Food antioxidant
- Water conditioning agent
- Detergent builder
- Cleaning and polishing stainless steel and metals
Caution:
Store in a dry, cool environment. Avoid ignition sources due to combustibility. Test for suitability in specific applications before use.
For MSDS Go to Downloads TabCU118SP Copper Powder, Fine, Spherical
Our specification guarantees that at least 80% of this powder are particles smaller than 44 micron. A typical analysis however shows that 88% of particles are smaller than 44 micron. Most particles are between 16 micron and 28 micron.
Applications include cold casting, 3-D printer filaments, metal clay, sintering, Green/ blue patina and rust effect, preventing mold in concrete, plaster,dry-wall, paint, adhesives and grout.
Also used in 3D printing process known as Selective Powder Deposition (SPD)
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features:
- High-purity, high-density spherical copper powder
- Provides high heat conductivity and electrical conductivity
- Suitable for various applications, including cold casting, 3-D printer filaments, metal clay, sintering, green/blue patina and rust effect, preventing mold in concrete, plaster, dry-wall, paint, adhesives, and grout
- Used in the 3D printing process known as Selective Powder Deposition (SPD)
- Particle size distribution with 88% of particles smaller than 44 micron
Product Specifications:
| Copper Purity | Over 99.5% |
| Hydrogen Loss | Less than 0.7% |
| Apparent Density | 4.5-5.5 g/cc |
| Typical Analysis | Copper > 99.5% Hydrogen Loss < 0.7% Apparent Density, g/cc: 4.5 - 5.5 Passing mesh 325 (44 micron): 80% ~ 88% |
Similar Products:
- Ultra-Fine Copper Powder
- High-Purity Copper Foil
- Copper Wire
- Copper Rod
- Copper Sheet
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for enhanced conductivity and versatility applications, including cold casting, 3-D printing, metal clay, and more.
Copper Powder CU112SP
CU112SP is a super fine, high density, high purity spherical copper powder that provides high heat conductivity and electrical conductivity properties to your products.
Our specification guarantees that at least 95% of this powder are particles smaller than 44 micron. A typical analysis however shows that 99.9% of particles are smaller than 44 micron. Most particles are between 10 micron and 22 micron.
HTS Code: 7406.10.0000.
NMFC: 30743
CAS: 7440-50-8
Applications include cold casting, 3-D printer filaments, metal clay, sintering, Green/ blue patina and rust effect, preventing mold in concrete, plaster,dry-wall, paint, adhesives and grout.
Also used in 3D printing process known as Selective Powder Deposition (SPD)
Old product code: CU155A
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features
- Super fine, spherical particles
- High density and purity
- Excellent thermal and electrical conductivity
- Consistent particle size distribution
- Versatile applications in industry and art
Product Specifications
| Particle Size | 95% < 44 microns |
| Purity | > 99.2% Copper |
| Apparent Density | 4.5 - 5.5 g/cc |
| Hydrogen Loss | < 0.7% |
| Mesh Passing | 99.9% through 325 (44 micron) |
Similar Products
- Fine silver powder, high conductivity
- Spherical bronze powder, 3D printing
- Fine aluminum powder, thermal conductivity
- High-purity zinc powder, corrosion resistance
- Spherical titanium powder, lightweight strength
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for 3D Printing Enthusiasts, Industrial Manufacturers, Electronics Professionals, Artists and Sculptors, Construction Material Suppliers
Gum Rosin Flakes, Brazilian, WW Grade
Gum Rosin Flakes, Brazilian, WW Grade. Gum Rosin Flakes, also known as colophony, are light yellow to amber in color and sourced from Pinus Elliottii, commonly known as the slash pine. This WW grade rosin complies with Class A, Type I, Grade WW Mil. Spec. A-A-59142. It is supplied as a mixture of small and large flakes, crystals, occasional large lumps, and fine powder. The product is brittle at room temperature but melts at stove-top temperatures. Gum rosin flakes are widely used in printing inks, varnishes, adhesives, soaps, sealing wax, soldering fluxes, depilatory hard wax, and paper sizing.
Product Specifications
| Softening Point | 78 ºC |
| Color | X/WW (5/6) Gardner, 1:1 Toluene |
| Country of Origin | Brazil |
| Acid Number | 166.2 mg KOH/g |
| Total VOC | 0.4% |
| H.S. Code | 3806.10.0010 |
| NMFC | 171260 |
| SKU | BROSIN |
Applications and Benefits:
- Used in printing inks for enhanced adhesion and color quality
- Essential in varnishes, adhesives, and paper sizing
- Key ingredient in depilatory hard wax formulations
- Used in soaps, sealing wax, and soldering fluxes
- 550 lb pallets available with free shipping in select regions
- Brazilian rosin is suitable for scalding hogs when controlled adhesion and reduced skin damage are required
Caution:
Store in a cool, dry place. Handle with proper safety precautions. Refer to the SDS for detailed safety and handling instructions.
- 1