Advanced Search Results
Refine your search by using the category filter.
High-density spherical bronze for specialized industrial applications.
High-purity, high-density spherical copper powder for enhanced conductivity and versatility.
Sodium Silicate, Powder, High Alkaline (SSGD)
Sodium Silicate (Water Glass) is a fine, white, high alkaline powder with a SiO₂ to Na₂O ratio of 2. It dissolves quickly and easily in water to form a hazy, colorless colloidal solution with a pH of 11.5 for a 1% solution. SSGD is widely used in specialized non-flammable coatings, refractory cements, adhesives, binders, agriculture, detergents, and construction materials. This product is sensitive to moisture and should be stored in tightly closed containers.
Product Specifications
| Wt. Ratio SiO₂/Na₂O | 2 |
| % Na₂O | 27.0% |
| % SiO₂ | 54.00% |
| % H₂O | 18.00% |
| Density | 0.73 g/cm³ |
| Characteristics | Fine white powder |
| CAS Number | 1344-09-8 |
Applications and Benefits:
- Refractory cements for high-temperature applications
- Non-flammable coatings and adhesives
- Used in construction materials and detergents
- Agricultural uses for soil improvement and binding
- Forms a stable colloidal solution for various industrial purposes
Handling and Storage:
- Store in tightly closed containers to avoid moisture exposure
- Keep in a cool, dry place to maintain product integrity
Caution:
Handle with appropriate protective equipment. Avoid inhalation of dust and contact with skin or eyes. Consult SDS for detailed safety information.
Sodium Silicate, Powder, Low Alkaline (SSG)
DOWNLOAD SPECIFICATIONSSodium Silicate (Water Glass) is a fine, white powder with a SiO2 to Na2O ratio of 3.22, the same as SSO and SSN liquid sodium silicates. When dissolved, it forms a hazy, colorless colloidal solution. SSG sodium silicate is used in specialized refractory compounds and acid-resistant cements. It functions as a binder for powdered materials intended for use in high-temperature and/or acid-resistant cements and other applications.
Product Specifications
| Wt. Ratio SiO2/Na2O | 3.22 |
| % Na2O | 19.2% |
| % SiO2 | 61.8% |
| % H2O | 18.5% |
| Density | 0.70 g/cm³ |
| Total Aluminum | 13 ppm |
| Total Arsenic | 0.018 ppm |
| Total Cadmium | < 0.010 ppm |
| Total Lead | 0.407 ppm |
| Total Mercury | < 0.010 ppm |
| CAS Number | 1344-09-8 |
Applications and Benefits:
- Used in refractory compounds
- Binder for powdered materials
- Ideal for acid-resistant and high-temperature cements
- Forms a colloidal solution when dissolved
Caution:
Store in a cool, dry place. Avoid inhalation of dust and contact with eyes. Use appropriate protective equipment when handling.
Steel Powder, Iron Powder, 250 Micron
Coarse steel powder (S100N) is produced from recycled black steel (construction steel) with improved features like dust-free, equal-size, and mostly spherical particles. It demonstrates strong magnetic attraction, has a high flow rate for dispensing from shakers, and is free from organic impurities such as cutting oil. This product is ideal for educational and industrial applications, including magnetism experiments, rust effect creation, and as a plant nutrient for iron supplementation.
Specifications
| Product Type | Recycled Black Steel (Construction Steel) |
| Particle Size | 250 Micron |
| Special Features | Dust-free, Spherical Particles, High Flow Rate |
| Magnetic Properties | Strong Magnetic Attraction |
| Organic Impurities | None |
| Carbon (C) | 0.8% - 1.2% |
| Manganese (Mn) | 0.35% - 1.2% |
| Silicon (Si) | 0.4% Minimum |
| Sulfur (S) | 0.05% Maximum |
| Phosphorus (P) | 0.05% Maximum |
Applications and Benefits:
- Used as iron filings for magnetism and electromagnetism experiments
- Preferred for educational use due to cleanliness and contamination-free particles
- Creates rust effects in sculptures, concrete, and structures
- Serves as a plant nutrient for iron supplementation
- High flow rate makes it suitable for dispensing from shakers
Caution:
This product may rust over time due to its recycled steel composition. Handle with care and review the Material Safety Data Sheet (MSDS) for safety precautions.
Activated Carbon Powder
Powdered activated carbon, derived from selected grades of coconut shell, is a virgin product designed for liquid phase applications. It efficiently removes organics from water streams and is certified by the NSF for use in drinking water and food-grade applications.
Product Specifications
| Mesh Size | -325 Mesh, 90% (min) |
| Iodine Number | 1100 mg/g (min) |
| pH | 8-10 |
| Ash Content | 4% (max) |
| Moisture Content | 5% (max) |
| Typical Density | 30-33 lbs/cuft, 0.48-0.53 g/cc |
Applications and Benefits:
- Removes organics from water streams.
- NSF certified for drinking water and food-grade use.
- Suitable for liquid phase purification.
- Derived from selected coconut shell grades for superior quality.
- High iodine number ensures effective performance.
Caution:
Wet activated carbon removes oxygen from the air, posing a severe hazard to workers inside carbon vessels. Follow confined space/low oxygen procedures per Local, State, and Federal guidelines before entry.
Lead Doped Barium Silicate
Lead Doped Barium Silicate is a type of silicate that contains barium and lead as dopants. It is commonly used in the production of ceramic capacitors and other electronic components due to its high dielectric constant and low loss tangent, which enhance the performance of these components. The material also exhibits good thermal stability and chemical resistance, making it suitable for use in harsh environments where stability and resistance to chemical degradation are crucial.
Beyond its applications in the electronics industry, Lead Doped Barium Silicate shows promise in the field of photovoltaics as a potential material for solar cells. Its unique properties may contribute to improving the efficiency and performance of solar energy conversion devices.
Product Specifications:
| Product Name | Barium Silicate |
| Product Type | Lead Doped Silicate |
| Material | Barium |
| Doping Material | Doped Barium Silicate |
| Doping Type | Lead Doped Barium Silicate |
| Doping Concentration | Lead Doped |
Similar Products:
- Lead Doped Strontium Silicate
- Barium Titanate Ceramic Capacitor
- Lead Zirconate Titanate (PZT) Ceramic
- Barium Zirconate Titanate (BZT) Thin Film
- Lead Doped Potassium Niobate
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Chemical manufacturers, Research and development teams in the field of materials science and engineering, Academic institutions offering courses in chemistry and materials science, Pharmaceutical companies, Companies specializing in the production of ceramics and glass.
WARNING: Poisonous
Barium Sulfate
Barium Sulfate (BaSO₄) is a chemically precipitated, high-purity compound widely used as a filler and functional additive in paints, coatings, pigments, plastics, and lead-acid batteries. Renowned for its outstanding chemical purity and narrow particle size distribution, Barium Sulfate offers excellent dispersion properties, high gloss, and low binder demand. Its extremely low chloride content and reduced electrical conductivity (100 µS/cm) make it ideal for demanding industrial applications. With an average particle size of 1.7 µm and an oil index of 13 g/100g, Barium Sulfate ensures optimal performance in various formulations. It is resistant to water, acids, alkalis, organic solvents, light, and industrial waste gases, including sulfur dioxide. Its versatility and exceptional properties make it a preferred choice for manufacturers in paints, coatings, plastics, and batteries.
Key Features
- Chemically precipitated, high-purity Barium Sulfate
- Excellent dispersion, high gloss, and low binder demand
- Extremely low chloride content and reduced electrical conductivity
- Resistant to water, acids, alkalis, and industrial gases
- Applications in paints, coatings, plastics, and batteries
Product Specifications
| Chemical Name | Barium Sulfate |
| CAS Number | 7727-43-7 |
| Chemical Formula | BaSO₄ |
| Particle Size | 1.7 µm (average) |
| Applications | Paints, coatings, plastics, pigments, batteries |
| Oil Index | 13 g/100g |
| Electric Conductivity | 100 µS/cm |
Perfect for industrial fillers and functional additives.
Boric Acid NF/USP Grade, Powder
Boric Acid, NF/USP Grade, Powder. Boric Acid (H3BO3; CAS# 10043-35-3) is a weak acid of boron commonly used as an antiseptic, insecticide, flame retardant, neutron absorber, and a precursor for other chemical compounds. Additional applications include textile fiber glass, borosilicate glass, glazes and enamels, casting powder, and flux.
Product Specifications
| Chemical Name | Boric Acid |
| Synonyms | Orthoboric Acid, OPTIBOR NF, Hydrogen Borate, Acidum Boricum |
| Molecular Formula | H3BO3 |
| CAS Number | 10043-35-3 |
| SKU | B001NF |
Applications and Benefits:
- Antiseptic and antimicrobial applications
- Flame retardant properties
- Neutron absorber in nuclear applications
- Textile fiber glass and borosilicate glass manufacturing
- Used in glazes and enamels
- Serves as casting powder and flux
Caution:
This product cannot be used as an insecticide or for carpet or upholstery deodorization or flea control. It is not intended for food applications, human nutritional supplements, or as food additives or preservatives.
Bromothymol Blue, Powder, >99%
Bromothymol Blue (also known as bromothymol sulfone phthalein, Bromthymol Blue, and BTB) is a chemical indicator for weak acids and bases. At a pH of 6.0 or lower, it appears yellow. It transitions in color between pH 6.0 and 7.6, becoming completely blue at pH 7.6.
Product Specifications
| Chemical Name | Bromothymol Blue |
| Synonyms | Bromothymol sulfone phthalein, BTB |
| Purity | >99% |
| Color Change Range | Yellow at pH ≤ 6.0, Blue at pH ≥ 7.6 |
| Chemical Formula | C27H27O5SBr2Na |
| Molecular Weight | 646.38 g/mol |
| CAS Number | 34722-90-2 |
Applications and Benefits:
- Used as a chemical indicator for weak acids and bases
- Facilitates pH measurement in the range of 6.0 to 7.6
- High purity powder for accurate scientific applications
- 1 gram prepares up to 10 liters (3 gallons) of indicator solution
Caution:
This high-purity product requires special procedures for solution preparation. For beginners, a ready-to-use solution (BTB10S) is recommended.
Bronze Powder, Spherical, Light
Prealloyed high-density spherical bronze powder is designed for specialized applications such as flame-spraying, brazing, strip bearings, metal-bonded grinding wheels, cutting tools, and metal injection molding (MIM). It is also suitable for resin-bonded friction components, decorative cold casting, surface engineering, filters, and hydraulic seals.
Product Specifications
| Chemical Composition | Copper: 89.7% Tin: 10% Phosphorous: 0.3% |
| Apparent Density | 5 g/cc |
| Particle Shape | Spherical |
| Sieve Analysis (% Weight) | +100 mesh: 0% -100/+140: 0% -140/+200: 0.1% -200/+325: 2.8% -325: 97.1% |
Applications and Benefits:
- Flame-spraying applications
- Brazing and welding materials
- Strip bearings
- Metal-bonded grinding wheels
- Cutting tools
- Metal injection molding (MIM)
- Decorative applications, including cold casting
- Resin-bonded friction components
- Surface engineering
- Filters and hydraulic seals
Caution:
Handle with care and follow safety guidelines as detailed in the SDS. Ensure suitability for the intended application before use.
Carbonyl Iron Powder (CIPMS)
CIPMS is Carbonyl Iron Powder, a zero valent iron powder in the form of microspheres with particle sizes ranging from 3 to 10 microns. Manufactured using advanced technology, it achieves an exceptional purity of 99.5% or more. This fine iron powder exhibits outstanding magnetization behavior, making it ideal for diverse applications such as metal injection molding, inductive electronic components, microwave absorption, magnetic ink, and magnetic plastic parts.
Product Specifications
| Iron (Fe) | 97.8% - 99.5% |
| Carbon (C max) | 0.75 - 0.90% |
| Nitrogen (N max) | 0.65 - 0.90% |
| Oxygen (O max) | 0.15 - 0.40% |
| d10 (Particle Size) | 1.7 - 2.7 Micron |
| d50 (Particle Size) | 3.9 - 5.2 Micron |
| d90 (Particle Size) | 7.2 - 9.2 Micron |
Applications and Benefits:
- Metal injection molding
- Inductive electronic components
- Microwave absorption materials
- Magnetic inks and plastics
- Advanced magnetization applications
Caution:
Limited quantity product. Ships only to the US lower 48 states and Canada. No COA is available for this product. Handle and use according to safety guidelines provided in the SDS.
Cast Iron Powder, Thermal Spray
Cast iron powder used in the manufacturing of specialty alloys and as an ingredient in pyrotechnic mixtures. Also suitable for thermal spray applications, with recommendations to consider S1001 and S145C for such purposes. Engineered for industrial use with high metallic iron content and controlled granulation.
Product Specifications
| Metallic Iron | >90% |
| Total Carbon | 2.85% |
| Manganese | <1.0% |
| Silicon | <3.0% |
| Chromium | <1.0% |
| Granulation | Passing 20 mesh: 95-100%, Passing 100 mesh: 1% Max. |
Applications and Benefits:
- Manufacturing of specialty alloys
- Ingredient in pyrotechnic mixtures
- Thermal spray applications
- High iron content for industrial use
- Controlled granulation for specific needs
Caution:
Evaluate product suitability before large-scale use. For thermal spray applications, also consider S1001 and S145C. Store in a dry, cool place to maintain granulation and performance.
Copper Powder 99+%, Mesh 200
High-purity copper powder made via water atomization and hydrogen reduction. Features very fine, irregular particles and clusters with relatively lower density. Recommended for applications requiring high purity and conductivity, including diamond wheels, sintering, and chemical reactions. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will conduct when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.3% |
| Hydrogen Loss | 0.39% |
| Apparent Density | 2.6 - 2.8 g/cc |
| Mesh Size | 200 mesh |
| Sieve Analysis |
+100 Mesh: Trace +140 Mesh: 1% Max +200 Mesh: 3% Max +325 Mesh: Balance -325 Mesh: 90% Min |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Conductive inks, paints, and pastes
- Injection molding
- Thermal management
- EDM electrodes
- Antifouling paints
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
- Diamond wheels
- Chemical reactions
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder 99.3%, General Purpose, 150 Mesh
The most popular and widely used copper powder, produced by the water atomization method followed by hydrogen reduction. This general-purpose copper powder has diverse applications, including the production of copper compounds, use as a catalyst in chemical formulations, abrasive wheels, carbon brushes, and more. It is important to note that pure copper powders may not exhibit continuity or conductivity under low-voltage multimeter tests due to air gaps and weak particle contacts but will show conductivity under higher voltage, when compacted, or mixed with oils/resins to form a paste.
Product Specifications
| Purity | 99.3% |
| Apparent Density | 2.7 g/cc |
| Nominal Mesh | -140 |
| -325 Mesh Ratio | > 50% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Production of copper compounds
- Catalyst in chemical formulations
- Abrasive wheels
- Carbon brushes
- Electronics and electrical applications
- Decorative and protective coatings
- Brazing and general-purpose industrial use
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder 99.3%, Mesh 325
Ultra-fine, high-purity copper powder made via water atomization and hydrogen reduction. Features spheroidal particles and clusters, offering higher conductivity and lower density. Suitable for metal injection molding and applications requiring high conductivity and purity. Typical applications include conductive inks, paints, pastes, thermal sprays, and sintered products. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will show conductivity when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.31% |
| Hydrogen Loss | 0.39% |
| Apparent Density | 2.97 g/cc |
| Mesh Size | 325 mesh |
| Sieve Analysis |
+60 Mesh: 0% -60/+80 Mesh: 0% -80/+100 Mesh: 0% -100/+140 Mesh: Trace -140/+200 Mesh: Trace -200/+325 Mesh: 0.6% -325 Mesh: 99.4% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Conductive inks, paints, and pastes
- Injection molding
- Thermal management
- EDM electrodes
- Antifouling paints
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder 99.5% - 99.9%
Ultra-fine, very high purity copper powder made via air atomization and hydrogen reduction. Features spherical particles with high conductivity and density. Recommended for diverse applications, including thick and thin film pastes, capacitor chips, end cap terminators, and thermal sprays. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will show conductivity when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.81% |
| Iron | 0.01% |
| Hydrogen Loss | 0.18% |
| Apparent Density | 4.89 g/cc |
| Sieve Analysis | +200 Mesh: 0% -200/+325 Mesh: 4.8% -325 Mesh: 95.2% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Capacitor chips
- End cap terminators
- Conductive inks, paints, and pastes
- Injection molding
- Electronics
- Thermal management
- EDM electrodes
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder 99.8%, Electronic Grade, Mesh 325
Electronic grade, high-purity copper powder made via water atomization and hydrogen reduction. Features ultra-fine, spheroidal particles with high conductivity and low density. Recommended for a variety of applications where conductivity is crucial, including thick and thin film pastes, capacitor chips, and thermal sprays. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will conduct when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.85% |
| Hydrogen Loss | 0.19% |
| Apparent Density | 2.97 g/cc |
| Mesh Size | 325 mesh |
| Sieve Analysis | +60 Mesh: 0% -60/+80 Mesh: 0% -80/+100 Mesh: 0% -100/+140 Mesh: Trace -140/+200 Mesh: Trace -200/+325 Mesh: 0.6% -325 Mesh: 99.4% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Capacitor chips
- End cap terminators
- Conductive inks, paints, and pastes
- Injection molding
- Electronics
- Thermal management
- EDM electrodes
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder > 99% (150 - 325 Mesh)
General-purpose, highly pure (>99%) copper powder made from electrolytic copper. Granular copper with a mesh size of 150 - 325. Known for its excellent electrical and thermal conductivities, this product finds use in the electrical and electronic industries. Additional applications include self-lubricating bearings, brazing, cold soldering, and mechanical plating. It is also used for antifouling paints, decorative and protective coatings, printing inks, medals, medallions, metal-plastic decorative products, and various chemical and medical purposes.
Product Specifications
| Purity | >99% |
| Mesh Size | 150 - 325 |
| Screen Analysis |
+60: 0.0% -60/+100: 0.7% -100/+200: 89.7% -200/+325: 9.1% -325: 0.5% |
Applications and Benefits:
- Electrical and electronic applications
- Self-lubricating bearings
- Brazing and cold soldering
- Mechanical plating
- Antifouling paints and decorative coatings
- Printing inks
- Medals, medallions, and metal-plastic decorative products
- Chemical and medical purposes
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
CU264: Copper Powder, 99.5%, Mesh 100
High purity copper powder, nominal mesh 100, Apparent density: 2.6 g/cc, Copper > 99.5%, with irregular shape particles. Used in powder metallurgy. May be admixed with other metal powders and graphite for specific properties such as strength, hardness and wear resistance for structural parts.
HTS Code: 7406.10.0000
NMFC: 30743
CAS: 7440-50-8
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features
- High Purity Copper (>99.5%)
- Nominal Mesh 100 for fine granularity
- Irregular particle shape for diverse uses
- Compatible with other metals and graphite
- Conductivity with higher voltage or when compacted
Product Specifications
| Apparent Density | 2.6 g/cc |
| Purity | > 99.5% Copper |
| Particle Shape | Irregular |
| Conductivity | At higher voltages/when compacted |
| Applications | Powder Metallurgy, Alloys |
Similar Products
- High purity bronze powder, metallurgy
- Fine granular aluminum powder, industrial
- Nickel powder, high density, 99% purity
- Spherical zinc powder, corrosion-resistant
- Iron powder, magnetic, for alloys
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Metallurgists, Industrial Manufacturers, Material Scientists, Engineering Students, Research and Development Labs
For MSDS Go to Downloads TabCU118SP Copper Powder, Fine, Spherical
Our specification guarantees that at least 80% of this powder are particles smaller than 44 micron. A typical analysis however shows that 88% of particles are smaller than 44 micron. Most particles are between 16 micron and 28 micron.
Applications include cold casting, 3-D printer filaments, metal clay, sintering, Green/ blue patina and rust effect, preventing mold in concrete, plaster,dry-wall, paint, adhesives and grout.
Also used in 3D printing process known as Selective Powder Deposition (SPD)
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features:
- High-purity, high-density spherical copper powder
- Provides high heat conductivity and electrical conductivity
- Suitable for various applications, including cold casting, 3-D printer filaments, metal clay, sintering, green/blue patina and rust effect, preventing mold in concrete, plaster, dry-wall, paint, adhesives, and grout
- Used in the 3D printing process known as Selective Powder Deposition (SPD)
- Particle size distribution with 88% of particles smaller than 44 micron
Product Specifications:
| Copper Purity | Over 99.5% |
| Hydrogen Loss | Less than 0.7% |
| Apparent Density | 4.5-5.5 g/cc |
| Typical Analysis | Copper > 99.5% Hydrogen Loss < 0.7% Apparent Density, g/cc: 4.5 - 5.5 Passing mesh 325 (44 micron): 80% ~ 88% |
Similar Products:
- Ultra-Fine Copper Powder
- High-Purity Copper Foil
- Copper Wire
- Copper Rod
- Copper Sheet
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for enhanced conductivity and versatility applications, including cold casting, 3-D printing, metal clay, and more.
For MSDS ClickCU7005F Copper Powder
Copper Powder offers exceptional metallic shine, ideal for metallic inks and paints. Compatible with most resins and conductive for ink creation.
For more details, visit the CU7005F product data sheet.
Key Features
- Exceptional metallic shine
- Art-grade pigment quality
- Compatible with various resins
- Usable with drying oils like linseed
- Enables creation of conductive inks
Product Specifications
| Type | Copper Powder |
| Use | Metallic Inks, Paints |
| Compatibility | Polyurethane, Polyacrylic, Polyester |
| Conductivity | Suitable for Conductive Inks |
| Pigment Quality | Art Grade |
Similar Products
- Metallic-shine gold powder for inks
- Silver pigment powder, art-grade
- Bronze powder, resin-compatible
- Reflective aluminum powder, versatile
- Artistic brass powder for painting
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Artists, Paint Manufacturers, and DIY Craft Enthusiasts