Advanced Search Results
Refine your search by using the category filter.
Copper Powder CU112SP
CU112SP is a super fine, high density, high purity spherical copper powder that provides high heat conductivity and electrical conductivity properties to your products.
Our specification guarantees that at least 95% of this powder are particles smaller than 44 micron. A typical analysis however shows that 99.9% of particles are smaller than 44 micron. Most particles are between 10 micron and 22 micron.
HTS Code: 7406.10.0000.
NMFC: 30743
CAS: 7440-50-8
Applications include cold casting, 3-D printer filaments, metal clay, sintering, Green/ blue patina and rust effect, preventing mold in concrete, plaster,dry-wall, paint, adhesives and grout.
Also used in 3D printing process known as Selective Powder Deposition (SPD)
Old product code: CU155A
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features
- Super fine, spherical particles
- High density and purity
- Excellent thermal and electrical conductivity
- Consistent particle size distribution
- Versatile applications in industry and art
Product Specifications
| Particle Size | 95% < 44 microns |
| Purity | > 99.2% Copper |
| Apparent Density | 4.5 - 5.5 g/cc |
| Hydrogen Loss | < 0.7% |
| Mesh Passing | 99.9% through 325 (44 micron) |
Similar Products
- Fine silver powder, high conductivity
- Spherical bronze powder, 3D printing
- Fine aluminum powder, thermal conductivity
- High-purity zinc powder, corrosion resistance
- Spherical titanium powder, lightweight strength
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for 3D Printing Enthusiasts, Industrial Manufacturers, Electronics Professionals, Artists and Sculptors, Construction Material Suppliers
MicroShield Fine Control 100
MicroShield Fine Control 100 is engineered to deliver a precise, non-lethal particle dispersion, using high-quality, 100 mesh iron pellets. Each pellet generates minimal impact, creating heat bursts and noise that effectively support wildlife control and safe training exercises. Made from recycled black construction steel, these coarse particles have a high flow rate suitable for dispensing from a shaker. The material is magnetically responsive and rusts naturally over time, making it ideal for environmental science experiments, art installations, and even plant nutrient applications.
The S100N model is an upgraded version, free of dust and with uniform, spherical particles. This premium composition makes it popular in educational settings, particularly in magnetism or electromagnetism experiments, as it is devoid of cutting oils and contaminants. This steel powder's chemical analysis ensures its purity and stability, with specific concentrations of carbon, manganese, and silicon to maintain consistent performance.
Key Features
- 100 mesh iron pellets for minimal impact dispersion
- Safe, non-lethal applications for wildlife and training
- High flow rate for controlled distribution from shakers
- Recycled construction steel; rusts naturally
- Dust-free, uniform, spherical particle design in S100N model
- Versatile in education, art, and plant nutrient uses
Product Specifications
| Material | Recycled black construction steel |
| Mesh Size | 100 mesh |
| Carbon | 0.8% - 1.2% |
| Manganese | 0.35% - 1.2% |
| Silicon | 0.4% Minimum |
| Sulfur | 0.05% Maximum |
| Phosphorus | 0.05% Maximum |
Perfect for wildlife control, training professionals, educators, artists, and agricultural experts
Here’s an table with suggested deterrent loads for several common shotgun gauges (12, 16, 20, and 28) using fine iron particles (100 mesh) for bird deterrent purposes. These configurations are generalized for typical effective ranges and use a combination of lower powder loads to create a wide, non-lethal dispersal pattern that is suitable for scaring birds.
Bird Deterrent Loads Using Iron Particles (100 Mesh) Across Various Gauges
| Gauge | Load Type | Iron Particle Load | Powder Charge | Estimated Velocity | Effective Range |
|---|---|---|---|---|---|
| 12 Gauge | Light Deterrent | 15 g (0.53 oz) | 16-18 gr (0.37-0.42 oz) | 250-300 m/s (820-984 ft/s) | 10-20 meters (33-66 ft) |
| Standard Deterrent | 20 g (0.71 oz) | 18-20 gr (0.42-0.46 oz) | 300-350 m/s (984-1148 ft/s) | 20-30 meters (66-98 ft) | |
| Heavy Deterrent | 25 g (0.88 oz) | 20-22 gr (0.46-0.5 oz) | 350-400 m/s (1148-1312 ft/s) | 30-40 meters (98-131 ft) | |
| 16 Gauge | Light Deterrent | 12 g (0.42 oz) | 14-16 gr (0.32-0.37 oz) | 230-280 m/s (754-919 ft/s) | 10-20 meters (33-66 ft) |
| Standard Deterrent | 18 g (0.63 oz) | 16-18 gr (0.37-0.42 oz) | 280-330 m/s (919-1083 ft/s) | 20-30 meters (66-98 ft) | |
| Heavy Deterrent | 22 g (0.78 oz) | 18-20 gr (0.42-0.46 oz) | 330-380 m/s (1083-1247 ft/s) | 30-40 meters (98-131 ft) | |
| 20 Gauge | Light Deterrent | 10 g (0.35 oz) | 12-14 gr (0.27-0.32 oz) | 220-270 m/s (722-886 ft/s) | 10-20 meters (33-66 ft) |
| Standard Deterrent | 15 g (0.53 oz) | 14-16 gr (0.32-0.37 oz) | 270-320 m/s (886-1050 ft/s) | 20-30 meters (66-98 ft) | |
| Heavy Deterrent | 18 g (0.63 oz) | 16-18 gr (0.37-0.42 oz) | 320-370 m/s (1050-1214 ft/s) | 30-40 meters (98-131 ft) | |
| 28 Gauge | Light Deterrent | 8 g (0.28 oz) | 10-12 gr (0.23-0.27 oz) | 210-260 m/s (689-853 ft/s) | 10-20 meters (33-66 ft) |
| Standard Deterrent | 10 g (0.35 oz) | 12-14 gr (0.27-0.32 oz) | 250-300 m/s (820-984 ft/s) | 20-30 meters (66-98 ft) | |
| Heavy Deterrent | 12 g (0.42 oz) | 14-16 gr (0.32-0.37 oz) | 300-350 m/s (984-1148 ft/s) | 30-40 meters (98-131 ft) |
Notes on Each Gauge:
- 12 Gauge: Best suited for moderate to heavy deterrent loads due to its higher capacity for both powder and particle loads, making it effective at longer ranges.
- 16 Gauge: A versatile option that offers a good balance between spread and range. Common in European hunting and bird deterrent contexts.
- 20 Gauge: Known for being lighter and easier to handle, making it suitable for closer-range deterrent applications.
- 28 Gauge: Ideal for short-range deterrent due to its lower recoil and capacity, typically for distances under 30 meters.
Important Considerations
- Testing and Customization: Load performance can vary based on powder type, shell type, and even environmental conditions. Testing in a controlled environment is essential.
- Safety First: Always consult a reloading manual and verify with experts, especially when using alternative materials like fine iron particles.
This table serves as a starting point; precise adjustments may be necessary depending on the equipment and specific needs. For more details on load specifications, consult reputable reloading sources or professional guidance.
- 1