Advanced Search Results
Refine your search by using the category filter.
Fast chemical reactions, hydrogen gas production, wood stains, iron-based chemicals.
Copper Powder CU112SP
CU112SP is a super fine, high density, high purity spherical copper powder that provides high heat conductivity and electrical conductivity properties to your products.
Our specification guarantees that at least 95% of this powder are particles smaller than 44 micron. A typical analysis however shows that 99.9% of particles are smaller than 44 micron. Most particles are between 10 micron and 22 micron.
HTS Code: 7406.10.0000.
NMFC: 30743
CAS: 7440-50-8
Applications include cold casting, 3-D printer filaments, metal clay, sintering, Green/ blue patina and rust effect, preventing mold in concrete, plaster,dry-wall, paint, adhesives and grout.
Also used in 3D printing process known as Selective Powder Deposition (SPD)
Old product code: CU155A
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features
- Super fine, spherical particles
- High density and purity
- Excellent thermal and electrical conductivity
- Consistent particle size distribution
- Versatile applications in industry and art
Product Specifications
| Particle Size | 95% < 44 microns |
| Purity | > 99.2% Copper |
| Apparent Density | 4.5 - 5.5 g/cc |
| Hydrogen Loss | < 0.7% |
| Mesh Passing | 99.9% through 325 (44 micron) |
Similar Products
- Fine silver powder, high conductivity
- Spherical bronze powder, 3D printing
- Fine aluminum powder, thermal conductivity
- High-purity zinc powder, corrosion resistance
- Spherical titanium powder, lightweight strength
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for 3D Printing Enthusiasts, Industrial Manufacturers, Electronics Professionals, Artists and Sculptors, Construction Material Suppliers
Cotton Cellulose Paper
The Cotton Cellulose Paper is a highly absorbent paper made of 100% pure cotton. It can be used as both a chromatography paper and filter paper. As a high-quality filter paper, it can filter solids as small as 2.5 um. It can also be used as chromatography and electrophoresis paper with water and a variety of solvents. The paper comes in a 50cm x 50cm sheet folded for simplified shipping. This paper is perfect for those looking for a reliable and versatile option for their chromatography and filtration needs.
Product Specifications:
| Material | 100% pure cotton cellulose |
| Dimensions | 50cm x 50cm sheet, can be cut into 75 or more chromatography strips (3/4" x 6" or 2 cm x 15 cm) |
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: Handle the Cotton Cellulose Paper with care as it can filter solids as small as 2.5 um. Use appropriate protective gear when handling.
Perfect for:
- Scientists and researchers in the fields of chemistry and biology
- Lab technicians and professionals working in the pharmaceutical industry
- Students studying chromatography and electrophoresis
- Individuals conducting experiments and research in their home labs
Similar Products
- Cellulose Filter Paper
- High-Quality Chromatography Paper
- 100% Cotton Filter Paper
- Ultra-Fine Filter Paper
- Chromatography and Electrophoresis Paper
Fine Iron Powder Acid Soluble
Fine Iron Powder is a high-quality, acid-soluble powder ideal for facilitating quick chemical reactions. Its versatility makes it an excellent choice for various applications, including the production of hydrogen gas, wood stains, Iron Sulfate (Ferrous Sulfate), and other iron-based chemicals. The powder exhibits exceptional solubility in diluted sulfuric acid, diluted hydrochloric acid, and diluted acetic acid (Vinegar), ensuring efficient reactions and desired outcomes.
Key Features:
- Facilitates quick chemical reactions
- Enables hydrogen gas production
- Ideal for wood stains
- Suitable for iron-based chemical production
- Highly soluble in diluted acids
Product Specifications:
| Specification | Details |
| Particle Size | Fine |
| Solubility | Acid Soluble |
| Applications | Chemical Reactions, Hydrogen Gas Production, Wood Stains, Iron-Based Chemicals |
Similar Products:
- Iron Filings for Chemical Reactions
- Iron Powder for Metallurgical Applications
- Fine Metal Powders for Industrial Use
- Iron Sulfate for Water Treatment
- Iron-Based Catalysts for Chemical Synthesis
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: If cautions, hazards, or warnings don't exist, this section will be hidden.
Perfect for chemists, chemical manufacturers, industrial researchers, and professionals seeking effective iron-based solutions.
Iron Powder, Super Fine, Light
Super fine high-purity elemental iron powder with irregular, porous sponge-like particles. Manufactured using high-temperature metallurgical reduction processes with hydrogen gas. This powder is low density, non-flowing, and suitable for various applications.
Product Specifications
| Iron Content | >97.7% |
| Acid Insolubility | 0.90% |
| H2-Loss | 1.75% |
| Apparent Density (HALL) | Low <2.2 g/cm3 |
| Particle Size Distribution | -100 Mesh: 100% +200 Mesh: 0.1% +325 Mesh: 2.4% -325 Mesh: 97.5% |
| HTS Number | 7205.21.0000 |
| CAS Number | 7439-89-6 |
Applications and Benefits:
- Cold casting / resin casting
- Metal clay
- Magnetic pigment
- Fingerprinting powder
- Making magnetic paints
- Magnetic powder for tension control devices
Additional Information:
This product is no longer in production. Limited quantities available. Please consider IRON325AT or IRON325ZV for alternative solutions. For further details, visit:
Microcrystalline Cellulose 101 NF (Super Fine)
Microcrystalline Cellulose (MCC) is a purified, partly depolymerized cellulose with shorter, crystalline polymer chains. Its strong binding performance makes MCC one of the most commonly used excipients in drug formulations, serving as a diluent, filler, and binder. The product is manufactured through controlled partial hydrolysis of high-purity wood pulp, followed by purification and drying. MCC is suitable for diverse pharmaceutical processes, including wet granulation, dry granulation, and direct compression.
Product Specifications
| Chemical Name | Microcrystalline Cellulose |
| Grade | USP/NF |
| Particle Size Distribution |
|
| Packaging | 55-Lb Bags/Boxes |
| Keyword | Cellulose Powder |
Applications and Benefits:
- Widely used excipient for pharmaceutical formulations.
- Ideal for wet granulation, dry granulation, and direct compression processes.
- Acts as a strong binder, filler, and diluent in drug manufacturing.
- Manufactured from high-purity wood pulp, ensuring superior quality.
- Available in bulk packaging.
Caution:
Handle with care. Avoid inhalation and contact with eyes or skin. Refer to the SDS for detailed safety instructions.
Super Fine Iron Powder, Atomized, High Purity
Super fine high-purity atomized iron powder with dense, free-flowing particles passing through a 45-micron sieve (mesh 325). This powder serves as a versatile filler for rubber, plastic, and resins, providing weight, magnetic properties, and metal detection capabilities. It is FDA-compliant for food contact applications and suitable for use in cosmetics. Additional applications include magnetic pigments, sintered products, powder metallurgy, chemical reactions, soft magnetic composite compounds, magnetism experiments, forensic products, and magnetic paints. IRON325AT is particularly suitable for cold casting high-precision small objects and MIM (Metal Injection Molding) or P&S (Press & Sinter) applications.
Specifications
| Chemical Formula | Iron (Fe) |
| Purity | 99+% |
| Carbon | 0.001% |
| Oxygen | 0.08% |
| Sulfur | 0.006% |
| Phosphorus | 0.001% |
| Apparent Density | 3 or higher |
| Typical Particle Size | +200 Mesh (75 microns): Trace -200 +325 Mesh (45 microns): 3% -325 Mesh: 97% |
| HTS# | 7205.21.0000 |
| CAS# | 7439-89-6 |
Applications and Benefits:
- Filler for rubber, plastic, and resins
- Magnetic pigments and paints
- Food contact and cosmetic applications
- Powder metallurgy and sintering
- Soft magnetic composite compounds
- Chemical reactions and magnetism experiments
- Forensic products
- Cold casting delicate, high-precision objects
Caution:
This product conforms to FDA 177.2600A-H and is safe for food contact. Handle with care. Review the Material Safety Data Sheet (MSDS) for safety and handling instructions.
- 1