Advanced Search Results
Refine your search by using the category filter.
High-density spherical bronze for specialized industrial applications.
High-purity, high-density spherical copper powder for enhanced conductivity and versatility.
Chelating agent for industrial, agricultural, and personal care applications.
Activated Carbon Powder
Powdered activated carbon, derived from selected grades of coconut shell, is a virgin product designed for liquid phase applications. It efficiently removes organics from water streams and is certified by the NSF for use in drinking water and food-grade applications.
Product Specifications
| Mesh Size | -325 Mesh, 90% (min) |
| Iodine Number | 1100 mg/g (min) |
| pH | 8-10 |
| Ash Content | 4% (max) |
| Moisture Content | 5% (max) |
| Typical Density | 30-33 lbs/cuft, 0.48-0.53 g/cc |
Applications and Benefits:
- Removes organics from water streams.
- NSF certified for drinking water and food-grade use.
- Suitable for liquid phase purification.
- Derived from selected coconut shell grades for superior quality.
- High iodine number ensures effective performance.
Caution:
Wet activated carbon removes oxygen from the air, posing a severe hazard to workers inside carbon vessels. Follow confined space/low oxygen procedures per Local, State, and Federal guidelines before entry.
Barium Sulfate
Barium Sulfate (BaSO₄) is a chemically precipitated, high-purity compound widely used as a filler and functional additive in paints, coatings, pigments, plastics, and lead-acid batteries. Renowned for its outstanding chemical purity and narrow particle size distribution, Barium Sulfate offers excellent dispersion properties, high gloss, and low binder demand. Its extremely low chloride content and reduced electrical conductivity (100 µS/cm) make it ideal for demanding industrial applications. With an average particle size of 1.7 µm and an oil index of 13 g/100g, Barium Sulfate ensures optimal performance in various formulations. It is resistant to water, acids, alkalis, organic solvents, light, and industrial waste gases, including sulfur dioxide. Its versatility and exceptional properties make it a preferred choice for manufacturers in paints, coatings, plastics, and batteries.
Key Features
- Chemically precipitated, high-purity Barium Sulfate
- Excellent dispersion, high gloss, and low binder demand
- Extremely low chloride content and reduced electrical conductivity
- Resistant to water, acids, alkalis, and industrial gases
- Applications in paints, coatings, plastics, and batteries
Product Specifications
| Chemical Name | Barium Sulfate |
| CAS Number | 7727-43-7 |
| Chemical Formula | BaSO₄ |
| Particle Size | 1.7 µm (average) |
| Applications | Paints, coatings, plastics, pigments, batteries |
| Oil Index | 13 g/100g |
| Electric Conductivity | 100 µS/cm |
Perfect for industrial fillers and functional additives.
Boric Acid NF/USP Grade, Powder
Boric Acid, NF/USP Grade, Powder. Boric Acid (H3BO3; CAS# 10043-35-3) is a weak acid of boron commonly used as an antiseptic, insecticide, flame retardant, neutron absorber, and a precursor for other chemical compounds. Additional applications include textile fiber glass, borosilicate glass, glazes and enamels, casting powder, and flux.
Product Specifications
| Chemical Name | Boric Acid |
| Synonyms | Orthoboric Acid, OPTIBOR NF, Hydrogen Borate, Acidum Boricum |
| Molecular Formula | H3BO3 |
| CAS Number | 10043-35-3 |
| SKU | B001NF |
Applications and Benefits:
- Antiseptic and antimicrobial applications
- Flame retardant properties
- Neutron absorber in nuclear applications
- Textile fiber glass and borosilicate glass manufacturing
- Used in glazes and enamels
- Serves as casting powder and flux
Caution:
This product cannot be used as an insecticide or for carpet or upholstery deodorization or flea control. It is not intended for food applications, human nutritional supplements, or as food additives or preservatives.
Bromothymol Blue, Powder, >99%
Bromothymol Blue (also known as bromothymol sulfone phthalein, Bromthymol Blue, and BTB) is a chemical indicator for weak acids and bases. At a pH of 6.0 or lower, it appears yellow. It transitions in color between pH 6.0 and 7.6, becoming completely blue at pH 7.6.
Product Specifications
| Chemical Name | Bromothymol Blue |
| Synonyms | Bromothymol sulfone phthalein, BTB |
| Purity | >99% |
| Color Change Range | Yellow at pH ≤ 6.0, Blue at pH ≥ 7.6 |
| Chemical Formula | C27H27O5SBr2Na |
| Molecular Weight | 646.38 g/mol |
| CAS Number | 34722-90-2 |
Applications and Benefits:
- Used as a chemical indicator for weak acids and bases
- Facilitates pH measurement in the range of 6.0 to 7.6
- High purity powder for accurate scientific applications
- 1 gram prepares up to 10 liters (3 gallons) of indicator solution
Caution:
This high-purity product requires special procedures for solution preparation. For beginners, a ready-to-use solution (BTB10S) is recommended.
Bronze Powder, Spherical, Light
Prealloyed high-density spherical bronze powder is designed for specialized applications such as flame-spraying, brazing, strip bearings, metal-bonded grinding wheels, cutting tools, and metal injection molding (MIM). It is also suitable for resin-bonded friction components, decorative cold casting, surface engineering, filters, and hydraulic seals.
Product Specifications
| Chemical Composition | Copper: 89.7% Tin: 10% Phosphorous: 0.3% |
| Apparent Density | 5 g/cc |
| Particle Shape | Spherical |
| Sieve Analysis (% Weight) | +100 mesh: 0% -100/+140: 0% -140/+200: 0.1% -200/+325: 2.8% -325: 97.1% |
Applications and Benefits:
- Flame-spraying applications
- Brazing and welding materials
- Strip bearings
- Metal-bonded grinding wheels
- Cutting tools
- Metal injection molding (MIM)
- Decorative applications, including cold casting
- Resin-bonded friction components
- Surface engineering
- Filters and hydraulic seals
Caution:
Handle with care and follow safety guidelines as detailed in the SDS. Ensure suitability for the intended application before use.
Copper Powder 99+%, Mesh 200
High-purity copper powder made via water atomization and hydrogen reduction. Features very fine, irregular particles and clusters with relatively lower density. Recommended for applications requiring high purity and conductivity, including diamond wheels, sintering, and chemical reactions. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will conduct when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.3% |
| Hydrogen Loss | 0.39% |
| Apparent Density | 2.6 - 2.8 g/cc |
| Mesh Size | 200 mesh |
| Sieve Analysis |
+100 Mesh: Trace +140 Mesh: 1% Max +200 Mesh: 3% Max +325 Mesh: Balance -325 Mesh: 90% Min |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Conductive inks, paints, and pastes
- Injection molding
- Thermal management
- EDM electrodes
- Antifouling paints
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
- Diamond wheels
- Chemical reactions
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder 99.3%, General Purpose, 150 Mesh
The most popular and widely used copper powder, produced by the water atomization method followed by hydrogen reduction. This general-purpose copper powder has diverse applications, including the production of copper compounds, use as a catalyst in chemical formulations, abrasive wheels, carbon brushes, and more. It is important to note that pure copper powders may not exhibit continuity or conductivity under low-voltage multimeter tests due to air gaps and weak particle contacts but will show conductivity under higher voltage, when compacted, or mixed with oils/resins to form a paste.
Product Specifications
| Purity | 99.3% |
| Apparent Density | 2.7 g/cc |
| Nominal Mesh | -140 |
| -325 Mesh Ratio | > 50% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Production of copper compounds
- Catalyst in chemical formulations
- Abrasive wheels
- Carbon brushes
- Electronics and electrical applications
- Decorative and protective coatings
- Brazing and general-purpose industrial use
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder 99.3%, Mesh 325
Ultra-fine, high-purity copper powder made via water atomization and hydrogen reduction. Features spheroidal particles and clusters, offering higher conductivity and lower density. Suitable for metal injection molding and applications requiring high conductivity and purity. Typical applications include conductive inks, paints, pastes, thermal sprays, and sintered products. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will show conductivity when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.31% |
| Hydrogen Loss | 0.39% |
| Apparent Density | 2.97 g/cc |
| Mesh Size | 325 mesh |
| Sieve Analysis |
+60 Mesh: 0% -60/+80 Mesh: 0% -80/+100 Mesh: 0% -100/+140 Mesh: Trace -140/+200 Mesh: Trace -200/+325 Mesh: 0.6% -325 Mesh: 99.4% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Conductive inks, paints, and pastes
- Injection molding
- Thermal management
- EDM electrodes
- Antifouling paints
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder 99.5% - 99.9%
Ultra-fine, very high purity copper powder made via air atomization and hydrogen reduction. Features spherical particles with high conductivity and density. Recommended for diverse applications, including thick and thin film pastes, capacitor chips, end cap terminators, and thermal sprays. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will show conductivity when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.81% |
| Iron | 0.01% |
| Hydrogen Loss | 0.18% |
| Apparent Density | 4.89 g/cc |
| Sieve Analysis | +200 Mesh: 0% -200/+325 Mesh: 4.8% -325 Mesh: 95.2% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Capacitor chips
- End cap terminators
- Conductive inks, paints, and pastes
- Injection molding
- Electronics
- Thermal management
- EDM electrodes
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder 99.8%, Electronic Grade, Mesh 325
Electronic grade, high-purity copper powder made via water atomization and hydrogen reduction. Features ultra-fine, spheroidal particles with high conductivity and low density. Recommended for a variety of applications where conductivity is crucial, including thick and thin film pastes, capacitor chips, and thermal sprays. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will conduct when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.85% |
| Hydrogen Loss | 0.19% |
| Apparent Density | 2.97 g/cc |
| Mesh Size | 325 mesh |
| Sieve Analysis | +60 Mesh: 0% -60/+80 Mesh: 0% -80/+100 Mesh: 0% -100/+140 Mesh: Trace -140/+200 Mesh: Trace -200/+325 Mesh: 0.6% -325 Mesh: 99.4% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Capacitor chips
- End cap terminators
- Conductive inks, paints, and pastes
- Injection molding
- Electronics
- Thermal management
- EDM electrodes
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder > 99% (150 - 325 Mesh)
General-purpose, highly pure (>99%) copper powder made from electrolytic copper. Granular copper with a mesh size of 150 - 325. Known for its excellent electrical and thermal conductivities, this product finds use in the electrical and electronic industries. Additional applications include self-lubricating bearings, brazing, cold soldering, and mechanical plating. It is also used for antifouling paints, decorative and protective coatings, printing inks, medals, medallions, metal-plastic decorative products, and various chemical and medical purposes.
Product Specifications
| Purity | >99% |
| Mesh Size | 150 - 325 |
| Screen Analysis |
+60: 0.0% -60/+100: 0.7% -100/+200: 89.7% -200/+325: 9.1% -325: 0.5% |
Applications and Benefits:
- Electrical and electronic applications
- Self-lubricating bearings
- Brazing and cold soldering
- Mechanical plating
- Antifouling paints and decorative coatings
- Printing inks
- Medals, medallions, and metal-plastic decorative products
- Chemical and medical purposes
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
For MSDS Go to Downloads TabCU118SP Copper Powder, Fine, Spherical
Our specification guarantees that at least 80% of this powder are particles smaller than 44 micron. A typical analysis however shows that 88% of particles are smaller than 44 micron. Most particles are between 16 micron and 28 micron.
Applications include cold casting, 3-D printer filaments, metal clay, sintering, Green/ blue patina and rust effect, preventing mold in concrete, plaster,dry-wall, paint, adhesives and grout.
Also used in 3D printing process known as Selective Powder Deposition (SPD)
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features:
- High-purity, high-density spherical copper powder
- Provides high heat conductivity and electrical conductivity
- Suitable for various applications, including cold casting, 3-D printer filaments, metal clay, sintering, green/blue patina and rust effect, preventing mold in concrete, plaster, dry-wall, paint, adhesives, and grout
- Used in the 3D printing process known as Selective Powder Deposition (SPD)
- Particle size distribution with 88% of particles smaller than 44 micron
Product Specifications:
| Copper Purity | Over 99.5% |
| Hydrogen Loss | Less than 0.7% |
| Apparent Density | 4.5-5.5 g/cc |
| Typical Analysis | Copper > 99.5% Hydrogen Loss < 0.7% Apparent Density, g/cc: 4.5 - 5.5 Passing mesh 325 (44 micron): 80% ~ 88% |
Similar Products:
- Ultra-Fine Copper Powder
- High-Purity Copper Foil
- Copper Wire
- Copper Rod
- Copper Sheet
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for enhanced conductivity and versatility applications, including cold casting, 3-D printing, metal clay, and more.
For MSDS ClickCU7005F Copper Powder
Copper Powder offers exceptional metallic shine, ideal for metallic inks and paints. Compatible with most resins and conductive for ink creation.
For more details, visit the CU7005F product data sheet.
Key Features
- Exceptional metallic shine
- Art-grade pigment quality
- Compatible with various resins
- Usable with drying oils like linseed
- Enables creation of conductive inks
Product Specifications
| Type | Copper Powder |
| Use | Metallic Inks, Paints |
| Compatibility | Polyurethane, Polyacrylic, Polyester |
| Conductivity | Suitable for Conductive Inks |
| Pigment Quality | Art Grade |
Similar Products
- Metallic-shine gold powder for inks
- Silver pigment powder, art-grade
- Bronze powder, resin-compatible
- Reflective aluminum powder, versatile
- Artistic brass powder for painting
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Artists, Paint Manufacturers, and DIY Craft Enthusiasts
Copper Powder CU112SP
CU112SP is a super fine, high density, high purity spherical copper powder that provides high heat conductivity and electrical conductivity properties to your products.
Our specification guarantees that at least 95% of this powder are particles smaller than 44 micron. A typical analysis however shows that 99.9% of particles are smaller than 44 micron. Most particles are between 10 micron and 22 micron.
HTS Code: 7406.10.0000.
NMFC: 30743
CAS: 7440-50-8
Applications include cold casting, 3-D printer filaments, metal clay, sintering, Green/ blue patina and rust effect, preventing mold in concrete, plaster,dry-wall, paint, adhesives and grout.
Also used in 3D printing process known as Selective Powder Deposition (SPD)
Old product code: CU155A
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features
- Super fine, spherical particles
- High density and purity
- Excellent thermal and electrical conductivity
- Consistent particle size distribution
- Versatile applications in industry and art
Product Specifications
| Particle Size | 95% < 44 microns |
| Purity | > 99.2% Copper |
| Apparent Density | 4.5 - 5.5 g/cc |
| Hydrogen Loss | < 0.7% |
| Mesh Passing | 99.9% through 325 (44 micron) |
Similar Products
- Fine silver powder, high conductivity
- Spherical bronze powder, 3D printing
- Fine aluminum powder, thermal conductivity
- High-purity zinc powder, corrosion resistance
- Spherical titanium powder, lightweight strength
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for 3D Printing Enthusiasts, Industrial Manufacturers, Electronics Professionals, Artists and Sculptors, Construction Material Suppliers
For MSDS Click or Go to Downloads TabHighly pure (>99%) electrolytic copper in a granular form, Copper Filings are versatile for various industrial, chemical, and artistic applications. Mesh 25 - 325 suitable for electrical and thermal conductivities.
Key Features
- Highly pure electrolytic copper
- Excellent electrical and thermal conductivities
- Versatile mesh size from 25 - 325
- Useful in a wide range of applications
- Effective for coatings, brazing, and soldering
Product Specifications
| Material | Copper >99% Purity |
| Mesh Size | 25 - 325 |
| Form | Granular Mixed Grain |
| Applications | Electrical, Mechanical, Decorative |
Similar Products
- High conductivity copper mesh
- Electrical grade copper pellets
- Thermal conductive copper strips
- Fine copper powder for coating
- Brazing grade copper granules
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Electrical Engineers, Industrial Manufacturers, Artists and Craftsmen, Chemical Technicians, Medical Equipment Manufacturers
For MSDS Go to Downloads TabSafety Data Sheet for Copper Powder
CU41, Copper Powder, Mesh 40 (Coarse)
High purity atomized copper powder -40/ 100 US Mesh has the largest grains compared with our other copper powder products. It is also usually darker in color. Minimum purity: 99.0%. Typical Apparent Density: 2.4. Nominal Mesh: -40/ 100. HTS Code: 7406.10.0000. NMFC: 30743. CAS: 7440-50-8. Typical Analysis: Copper: 99.87%, Hydrogen Loss: 0.21%, Apparent Density: 2.57 g/cc. Sieve Analysis: 40 mesh 0%, -40/ 100 mesh 90.4%, -100/ 140 mesh 9%, -140 mesh 0.6%.
Key Features
- High purity, minimum 99.0%
- Coarse grain size, -40/ 100 US Mesh
- Dark color, distinct appearance
- Apparent Density: 2.57 g/cc
- Comprehensive sieve analysis included
Product Specifications
| Purity | 99.87% |
| Hydrogen Loss | 0.21% |
| Apparent Density | 2.57 g/cc |
| Mesh Size | >40 mesh 0% -40/ 100 mesh 90.4% -100/ 140 mesh 9% -140 mesh 0.6% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS Number | 7440-50-8 |
Similar Products
- Fine grain, 99% pure copper powder
- Medium grain, dark copper powder
- High-density, fine copper powder
- Coarse, 98% pure copper flakes
- Atomized, spherical copper granules
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Industrial Manufacturers, Metal Fabrication Professionals, Chemical Industry Experts, Research and Development Teams, Specialty Alloy Producers
Density Cubes, Metals Iron
These iron cubes are designed for density experiments in the classroom or laboratory, available in 10mm or 20mm sizes, with precise measurements for accurate and consistent results, made from durable iron material. The cubes are packaged individually, with a weight of 0.135 lb, and are for science teachers, students, and researchers. The iron material provides a high density, making it for demonstrating density concepts.
Product Specifications
| Material: | Iron |
| Sizes: | 10mm or 20mm |
| Package Dimensions: | 20 x 20 mm |
| Weight: | 0.135 lb |
| Density: | 7.9 g/cm³ |
Applications and Benefits:
- For density experiments in the classroom or laboratory
- For science teachers, students, and researchers to demonstrate density concepts
- for hands-on learning and experimentation
Key Features and Benefits
- Iron material for high density and precise measurements
- Precise measurements for accurate and consistent results
- Reusable packaging for convenient storage
- Durable iron material for long-lasting use
Caution:
Handle with care, as iron can be sharp and heavy. Avoid touching sharp edges and keep out of reach of children.
Ethylenediaminetetraacetic Acid (EDTA)
Ethylenediaminetetraacetic acid (EDTA) is a white odorless crystalline powder used as chelating agent in pulp & paper, cleaning, chemical processing, agriculture and water treatment.
Acid EDTA also known as edetic acid, is an aminopolycarboxylic acid with the formula [CH2N(CH2CO2H)2]2. This white, water-soluble solid is widely used to bind to iron (Fe2+/Fe3+) and calcium ions (Ca2+), forming water-soluble complexes even at neutral pH. It is thus used to dissolve Fe- and Ca-containing scale as well as to deliver iron ions under conditions where its oxides are insoluble.
In Textiles and paper industry, EDTA is mainly used to sequester (bind or confine) metal ions in aqueous solution. In the textile industry, it prevents metal ion impurities from modifying colors of dyed products. In the pulp and paper industry, EDTA inhibits the ability of metal ions, especially Mn2+, from catalyzing the disproportionation of hydrogen peroxide, which is used in bleaching.
EDTA is added to some food as a preservative or stabilizer to prevent catalytic oxidative discoloration, which is catalyzed by metal ions.
EDTA can solubilize Fe3+ ions at or below near neutral pH. This property is useful in agriculture including hydroponics. However, given the pH dependence of ligand formation, EDTA is not helpful for improving iron solubility in above neutral soils. Otherwise, at near-neutral pH and above, iron(III) forms insoluble salts, which are less bioavailable to susceptible plant species.
EDTA is used extensively in the analysis of blood. It is an anticoagulant for blood samples for CBC/FBCs, where the EDTA chelates the calcium present in the blood specimen, arresting the coagulation process and preserving blood cell morphology.
In shampoos, cleaners, and other personal care products, EDTA salts are used as a sequestering agent to improve their stability in air.
Product Specifications
| CAS Number | 60-00-4 |
| Molecular Weight | 292.25 |
| Chemical Formula | C10H16O8N2 |
Applications:
- Pulp and paper: Sequesters metal ions to prevent discoloration
- Cleaning: Dissolves Fe- and Ca-containing scales
- Agriculture: Solubilizes Fe3+ ions in hydroponics
- Water treatment: Chelates metal ions
- Textile industry: Prevents metal ions from altering dye colors
- Food preservation: Stabilizes against oxidative discoloration
- Blood analysis: Anticoagulant in CBC/FBC tests
- Personal care: Enhances stability in shampoos and cleaners
Caution:
Ensure proper handling and usage as per the safety guidelines. Read the Safety Data Sheet before use.
Graphite Powder, Micronized Flake, 95+%
Micronized natural graphite is an electrically conductive powder that can produce metallic shine on skin and smooth surfaces. Particle size of about 5 micron and flake shape of particles allow you to apply this powder by brush or by foam to create a conductive surface or the metallic shine effect. GRPM5 is a natural graphite with more than 95% carbon content, ground to a fine powder with average particle size of about 5 micron.
Product Specifications
| Carbon Content | 95+% |
| Particle Size | 5 micron (average) |
| Apparent Density | 0.25 g/cc |
| CAS# Graphite | 7782-42-5 |
| CAS# Carbon | 7740-44-0 |
| SKU | GRPM5 |
Applications and Benefits:
- Lubrication (cold and hot)
- Lubricant pastes
- Conductive pastes
- Electroplating on plastics and non-conductive objects
- Powder metallurgy for alloy and sintering control
Caution:
The natural graphite may have impurities such as sulfur, quartz, mica, ash, and humidity.
Iron Electrodes
These low‑carbon iron electrodes are flat sheets measuring 19 mm × 125 mm × 0.5 mm, each weighing 16 g and stamped with “FE”. Sold in packs, they are for constructing voltaic cells and conducting electrochemical, chemistry, and physics experiments.
Product Specifications
| Material | Low Carbon Iron Sheets |
| Dimensions (L × W × T) | 125 mm × 19 mm × 0.5 mm |
| Weight per Electrode | 16 g |
| Identification Code | Stamped with “FE” |
| SKU | FEFLAT |
Applications and Benefits:
- Construction of voltaic (galvanic) cells
- Electrochemical reaction studies
- Chemistry experiment setups requiring iron electrodes
- Physics experiments involving electrical conductivity and resistance
- Corrosion and material degradation testing
Key Features and Benefits
- Low carbon iron provides consistent electrical conductivity
- Precise dimensions ensure repeatable experimental results
- Stamped “FE” identification for easy tracking and inventory
- Flat sheet geometry simplifies mounting in cell assemblies
- Packaged as a set of two for convenient experiment preparation
Caution:
Metal electrodes have sharp edges; handle with protective gloves and store safely to avoid injury.