Bromothymol Blue Solution 0.04%

Strong solution of Bromothymol Blue (also known as bromothymol sulfone phthalein, Bromthymol Blue, and BTB) is a chemical indicator for weak acids and bases. In the pH of 6.0 or lower, it is yellow. It changes color between the pH of 6 to 7.6 when it becomes completely blue at the pH 7.6. This is a prepared solution and is ready for use. May be used as an acid/base indicator or as a stain for cell walls or nuclei.

Product Specifications

Applications and Benefits:

• Effective chemical indicator for weak acids and bases.
• Color transition for precise pH measurement in the range of 6.0-7.6.
• Useful as a stain for cell walls and nuclei in biological studies.
• Ready-to-use solution for laboratory applications.

Caution:

Use with care in laboratory settings. Follow standard safety protocols for handling chemicals.

Copper Powder 99.3%, Mesh 325

Ultra-fine, high-purity copper powder made via water atomization and hydrogen reduction. Features spheroidal particles and clusters, offering higher conductivity and lower density. Suitable for metal injection molding and applications requiring high conductivity and purity. Typical applications include conductive inks, paints, pastes, thermal sprays, and sintered products. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will show conductivity when compacted or mixed with oils or resins.

Product Specifications

Applications and Benefits:

• Thick and thin film pastes
• Conductive inks, paints, and pastes
• Injection molding
• Thermal management
• EDM electrodes
• Antifouling paints
• Thermal sprays
• Sintered alloys/products
• Brazing/soldering paste

Caution:

Handle with care. Refer to the SDS for detailed safety guidelines.

Copper Powder 99.8%, Electronic Grade, Mesh 325

Electronic grade, high-purity copper powder made via water atomization and hydrogen reduction. Features ultra-fine, spheroidal particles with high conductivity and low density. Recommended for a variety of applications where conductivity is crucial, including thick and thin film pastes, capacitor chips, and thermal sprays. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will conduct when compacted or mixed with oils or resins.

Product Specifications

Applications and Benefits:

• Thick and thin film pastes
• Capacitor chips
• End cap terminators
• Conductive inks, paints, and pastes
• Injection molding
• Electronics
• Thermal management
• EDM electrodes
• Thermal sprays
• Sintered alloys/products
• Brazing/soldering paste

Caution:

Handle with care. Refer to the SDS for detailed safety guidelines.

Mechanical Tally Counter

Count anything with the mechanical tally counter - no batteries required. Counts up to 9,999 laps, runs, goals, strokes, overs, hits, people, goods delivered, and more. Reset knob in one side with metal ring for secure holding in hands. Suitable for business, pleasure, and many sports.

Key Features:

• 1 Pack = one assorted-color counter.
• 5 Pack = all five counters.
• Counts up to 9,999
• No batteries required
• Reset knob with metal ring
• Suitable for business, pleasure, and many sports
• Counts laps, runs, goals, strokes, overs, hits, people, goods delivered, and more

Product Specifications:

Count Anything with the Mechanical Tally Counter - No Batteries Required

Iodine Solution (29 Ml., 1 Fl. Oz.)

Introducing our Iodine Solution, specifically designed for starch tests. This solution contains iodine and has a volume of 29 ml or 1 fl oz. It is perfect for laboratory use and can help in detecting the presence of starch in various materials. Use it to enhance your experiments and research with accurate results.

Lugol's Iodine Solution 2%

Lugol's Iodine Solution 2%, also known as Lugol's Solution, is a technical grade solution of iodine in potassium iodide. This solution contains 9 grams of iodine in 100 milliliters of the solution. It is important to note that this product is not for human or animal consumption.

Nickel Pellets, Electrolytic Grade

Nickel Pellets, Electrolytic Grade are highly pure with a purity level of at least 99.9%. These pellets are perfect for chemical reactions and for making special alloys. With a diameter range of 6mm up to 18mm (1/4" up to 3/4"), these pellets are versatile and can be used for a variety of applications.

Phenolphthalein

Phenolphthalein (C20H14O4) is an organic compound used as an acid-base indicator. It is prepared using alcohol as a solvent due to its poor solubility in water. The indicator has a visual transition interval that is colorless at pH 8.0, pink at 8.5 and red at pH 10.0.

Key Features:

• Organic compound
• Used as an acid-base indicator
• Colorless at pH 8.0, pink at pH 8.5, and red at pH 10.0
• Poorly soluble in water, typically prepared using alcohol as a solvent

Product Specifications:

Potassium Iodide 99% USP

Potassium iodide granular 99% USP grade. For laboratory, industrial, research, and educational uses. USP-grade potassium iodide may be used in manufacturing potassium iodide tablets. Each adult dosage is 135 mg, with one ounce of potassium iodide equivalent to 207 adult doses. Actual purity is 100% (dried).

Product Specifications

Applications and Benefits:

• Manufacturing potassium iodide tablets
• Laboratory and research uses
• Industrial and educational applications

Caution:

For laboratory, industrial, research, and educational uses only.

Certificate Of Analysis (COA) available for orders of one or more 55-lb bags. Typical analysis is displayed below the price list.

Sodium C14-16 Olefin Sulfonate 40% Solution

AOS-40 is a 40% solution of sodium C14-16 alpha olefin sulfonate that offers high foaming power, good emulsification, skin mildness, and excellent lime soap dispersion. Perfect for sulfate-free personal care and detergent products. Recommended for use in personal care, household, industrial detergents, and car wash products.

Product Specifications

Applications and Benefits:

• High foaming power with excellent lime soap dispersion.
• Skin mildness ideal for sulfate-free personal care products.
• Enhanced pH stability compared to alcohol sulfates.
• Effective in household, industrial detergents, and car wash products.
• Improved viscosity and foam characteristics for formulations.

Caution:

Use only as directed. Avoid direct contact with eyes. Store in a cool, dry place.

Sodium Chlorite, 80%, Technical Grade

Sodium Chlorite, 80%, Technical Grade, is primarily used for generating chlorine dioxide in bleaching and stripping applications for textiles, pulp, and paper. This product meets the requirements of ANSI/AWWA B303-00 and is EPA registered (Reg. No. 5382-42). It is NSF listed under ANSI/NSF Standard 60. The product is shipped in compliance with hazmat regulations and is available in 100-lb drums, requiring a commercial/industrial shipping address.

Product Specifications

Shipping Information:

• Hazmat fee is included; no additional charges.
• Ships by UPS Ground only; no air or priority shipping.
• 100-lb drums require a commercial/industrial shipping address.
• Delivery restricted to the lower 48 United States and Canada.

Applications and Benefits:

• Chlorine dioxide generation for bleaching and stripping textiles
• Used in pulp and paper processing
• Meets ANSI/AWWA and EPA standards

Caution:

Product cannot be combined with other chemicals in the same invoice. Hazmat fees are non-refundable if the product is refused or returned. Ensure proper storage and handling procedures.

Trisodium Phosphate (TSP), Technical

Trisodium Phosphate (TSP), also known as Sodium Phosphate Tribasic, is a white, crystalline, granular or powdered compound with the formula Na₃PO₄·12H₂O·1/4 NaOH. It is primarily used as a heavy-duty cleaner, degreaser, and industrial additive for applications such as boiler water compounds, detergents, and metal cleaning. TSP is effective for cleaning walls, degreasing surfaces, and removing hydrocarbon residues. It can be combined with household chlorine bleach for mildew removal and is used in ceramics to lower glaze flow points. Certified to NSF/ANSI Standard with a max use of 41 mg/L.

Product Specifications

Applications and Benefits:

• Heavy-duty cleaner for walls, driveways, and industrial equipment
• Degreases and deglosses surfaces before painting
• Used in detergents, metal cleaning, and textiles
• Combines with bleach for effective mildew removal
• Functions as a flux for brazing copper in medical-grade plumbing
• Lowers flow points of glazes in ceramic production

Handling and Storage:

• Store in a cool, dry place
• Keep containers tightly closed to prevent moisture exposure
• Use protective equipment when handling to avoid skin or eye contact

Caution:

Not for food use. Handle with care as it is a strong alkaline compound. Avoid inhalation of dust. Consult SDS for detailed safety information.