Cast Iron Dust, High Carbon, Mesh 150

A high carbon cast iron powder suitable for sintering, melting, fireworks, and hand warmers. May also be used as a filler in resins or added to concrete for a rust effect. Includes some clumps naturally formed due to stacking pressure, which can be removed by re-screening, chopping, or grinding. Suitable for wood stains when mixed with vinegar, with clumps gradually disintegrating. Particles are slightly hydrofoabic to reduce fire risks; surfactant recommended for increased wetting properties in specific applications.

Product Specifications

Applications and Benefits:

• Sintering
• Melting
• Fireworks
• Hand warmers
• Filler in resins
• Concrete rust effects
• Wood stains with vinegar
• Oxygen absorbers

Caution:

Test and evaluate before large quantity orders. Free samples available for pickup, or purchase small quantities online for shipping. Add surfactant or detergent to water when used for hand warmers, oxygen absorbers, or rust effects to improve wetting. Store in a dry, cool place to prevent clumping.

Rubber Pipette Filler

The Rubber Pipette Filler is a convenient tool used to release air, draw solution, and precisely release solution from a pipette. It is designed to fill both glass and plastic pipettes safely. This tool is perfect for anyone who needs to dispense precise amounts of liquid in their work or experiments.

Key Features:

• Convenient and easy to use
• Allows for precise solution dispensing
• Works with both glass and plastic pipettes

Instructions:

1. Insert the top of the pipette in the bottom of the pipette filler.
2. Release air from the pipette filler by squeezing valve "A" on the top of the pipette filler while simultaneously squeezing the bulb. The amount of air released should be dependent on the size of the pipette being used. More air should be released for larger volume pipettes.
3. Insert the tip of the pipette into the solution to be dispensed.
4. Siphon solution into the pipette to the desired level by squeezing valve "S" on the bottom of the pipette filler. This uses the vacuum created in the bulb to draw solution into the pipette. Avoid drawing solution into the pipette filler.
5. Empty the pipette by squeezing valve "E" on the side tube. This will help to release solution at the desired rate and to the desired level.
6. It is best to fill the pipette past the zero mark on step 4 (valve "S") and then draw the level down to the zero mark on step 6 (valve "E"). Once the pipette is filled to the desired level, the contents can be dispensed using valve "E".

Cautions: Handle with care. Do not use with corrosive or volatile liquids. Keep away from heat and flames.