Español Advanced Search Results
Refine your search by using the category filter.
High-purity, high-density spherical copper powder for enhanced conductivity and versatility.
Fine-grade iron powder for chemical, filler, and magnetic applications.
For MSDS Go to Downloads TabCU118SP Copper Powder, Fine, Spherical
Our specification guarantees that at least 80% of this powder are particles smaller than 44 micron. A typical analysis however shows that 88% of particles are smaller than 44 micron. Most particles are between 16 micron and 28 micron.
Applications include cold casting, 3-D printer filaments, metal clay, sintering, Green/ blue patina and rust effect, preventing mold in concrete, plaster,dry-wall, paint, adhesives and grout.
Also used in 3D printing process known as Selective Powder Deposition (SPD)
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features:
- High-purity, high-density spherical copper powder
- Provides high heat conductivity and electrical conductivity
- Suitable for various applications, including cold casting, 3-D printer filaments, metal clay, sintering, green/blue patina and rust effect, preventing mold in concrete, plaster, dry-wall, paint, adhesives, and grout
- Used in the 3D printing process known as Selective Powder Deposition (SPD)
- Particle size distribution with 88% of particles smaller than 44 micron
Product Specifications:
| Copper Purity | Over 99.5% |
| Hydrogen Loss | Less than 0.7% |
| Apparent Density | 4.5-5.5 g/cc |
| Typical Analysis | Copper > 99.5% Hydrogen Loss < 0.7% Apparent Density, g/cc: 4.5 - 5.5 Passing mesh 325 (44 micron): 80% ~ 88% |
Similar Products:
- Ultra-Fine Copper Powder
- High-Purity Copper Foil
- Copper Wire
- Copper Rod
- Copper Sheet
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for enhanced conductivity and versatility applications, including cold casting, 3-D printing, metal clay, and more.
Iron Powder, Micronized, Light
Micronized low-density iron powder is by far the finest grade of iron powder that has ever been made. It consists of irregular and flake particles as small as 5 microns. This product is an electronic grade high purity iron dust; however, very fine particles tend to oxidize easier. In most cases about 2 to 3 percent of this product is oxidized on the surface during the grinding and packaging process.
Product Specifications
| Particle Size | As small as 5 microns |
| Purity | High purity, electronic grade |
| Oxidation Rate | 2–3% surface oxidation during grinding/packaging |
Applications and Benefits:
- Chemical reactions
- Filler metals for plastic or epoxy compounds
- Mirror backing
- High-density P/M parts
- Carrier for photocopy toners
- Matrix metal for diamond bonding
- Ferromagnetic applications
- Fingerprinting powders
- Magnetic inks and paints
Caution:
Fine iron dust in air can form an explosive mixture. Avoid dust. Avoid inhalation. Use a mask and protective clothing while handling.
- 1