Advanced Search Results
Refine your search by using the category filter.
Soft Magnetic Iron Rod, 5 Mm X 200 Mm (D X L)
The Soft magnetic Iron Rod with dimensions of 5mm x 200mm (D x L) is a versatile and highly useful product for various industries, including electronics, physics, and research. Made from soft, magnetic iron, this rod is for use in applications where strong magnetic fields are required. The rod is packaged individually for convenience.
Product Specifications
| Product Name | Soft Magnetic Iron Rod |
| Dimensions | 5 mm x 200 mm (D x L) |
| Material | Iron |
| SKU | SOFTIR |
| Packaging | Individual packaging |
Applications and Benefits
- Electronics and electrical devices
- Physics and research applications
- Magnetic field experiments
- Manufacturing of electronic devices
Key Features and Benefits
- Soft magnetic material for efficient magnetization and demagnetization
- 5 mm diameter and 200 mm length for versatile use
- Resistant to corrosion and oxidation for long-lasting performance
- Low coercivity for minimal energy loss during magnetization
- Magnetic permeability for enhanced magnetic field strength
Caution:
Handle with care. Soft iron rods can be easily bent or deformed. Keep away from electronic devices and magnetic fields.
Copper Powder 99.3%, Mesh 325
Ultra-fine, high-purity copper powder made via water atomization and hydrogen reduction. Features spheroidal particles and clusters, offering higher conductivity and lower density. Suitable for metal injection molding and applications requiring high conductivity and purity. Typical applications include conductive inks, paints, pastes, thermal sprays, and sintered products. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will show conductivity when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.31% |
| Hydrogen Loss | 0.39% |
| Apparent Density | 2.97 g/cc |
| Mesh Size | 325 mesh |
| Sieve Analysis |
+60 Mesh: 0% -60/+80 Mesh: 0% -80/+100 Mesh: 0% -100/+140 Mesh: Trace -140/+200 Mesh: Trace -200/+325 Mesh: 0.6% -325 Mesh: 99.4% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Conductive inks, paints, and pastes
- Injection molding
- Thermal management
- EDM electrodes
- Antifouling paints
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder 99.8%, Electronic Grade, Mesh 325
Electronic grade, high-purity copper powder made via water atomization and hydrogen reduction. Features ultra-fine, spheroidal particles with high conductivity and low density. Recommended for a variety of applications where conductivity is crucial, including thick and thin film pastes, capacitor chips, and thermal sprays. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will conduct when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.85% |
| Hydrogen Loss | 0.19% |
| Apparent Density | 2.97 g/cc |
| Mesh Size | 325 mesh |
| Sieve Analysis | +60 Mesh: 0% -60/+80 Mesh: 0% -80/+100 Mesh: 0% -100/+140 Mesh: Trace -140/+200 Mesh: Trace -200/+325 Mesh: 0.6% -325 Mesh: 99.4% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Capacitor chips
- End cap terminators
- Conductive inks, paints, and pastes
- Injection molding
- Electronics
- Thermal management
- EDM electrodes
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
- 1