Español Advanced Search Results
Refine your search by using the category filter.
Steel Powder, Iron Powder (S1001)
S1001 is a highly compressible, water-atomized steel powder designed for high-density, high-strength powder metallurgy (P/M) and powder forging applications. Its superior compressibility allows single pressing to 7.2 g/cm³ and repressing to densities up to 7.4 g/cm³, enhancing the performance of P/M parts. The powder offers enhanced compaction capability, resulting in higher strength and density. S1001 is suitable for sintering, cold casting, filler metal applications, and advanced 3D printing processes such as Selective Powder Deposition (SPD).
Specifications
| Category | Iron Powder, Metal Powder, Filler Metal |
| Compressibility | Single press to 7.2 g/cm³, repress to 7.4 g/cm³ |
| Particle Size (Sieve Analysis) | +60 Mesh (250 µm): Trace -60/+100 Mesh (150–250 µm): 10% -100/+140 Mesh (105–150 µm): 17% -140/+200 Mesh (75–105 µm): 20% -200/+325 Mesh (45–75 µm): 25% -325 Mesh (<45 µm): 28% |
| Carbon (C) | Max 0.010% |
| Oxygen (O) | Max 0.15% |
| Sulfur (S) | Max 0.014% |
| Manganese (Mn) | Min 0.150% - Max 0.220% |
Applications and Benefits:
- Powder metallurgy for high-density, high-strength parts
- Powder forging with superior compaction capabilities
- Sintering and cold casting applications
- Filler metal for welding and repairs
- 3D printing using Selective Powder Deposition (SPD)
Caution:
Handle with care. Review the Material Safety Data Sheet (MSDS) for safety and handling instructions.
Steel Powder, Iron Powder, Coarse, Dense
S3001 is a coarse, high-purity atomized iron powder specifically designed for welding and alloying applications. With its dense, larger particles, S3001 minimizes dust production and ensures solid joint formation. Used as a filler metal, it significantly improves metal deposition rates and productivity. By leveraging the excess heat from arc welding, additional filler material can be melted, enhancing deposition without increasing arc energy. This coarse metal powder is ideal for industrial applications requiring high-density iron powder.
Specifications
| Category | Iron Powder, Metal Powder, Filler Metal |
| Apparent Density | 3.00 g/cm³ |
| Flow Rate (Hall) | 37 seconds/50g |
| Iron (Fe) | >99% |
| Carbon (C) | 0.005% |
| Oxygen (O) | 0.120% |
| Sulfur (S) | 0.008% |
| Phosphorus (P) | 0.010% |
| Manganese (Mn) | 0.180% |
| Silicon (Si) | 0.015% |
| Chromium (Cr) | 0.050% |
| Vanadium (V) | 0.005% |
| Titanium (Ti) | 0.001% |
| Calcium (Ca) | 0.001% |
Typical Screen Analysis
| U.S. Mesh | Microns | Wt % |
| +30 | >600 | Trace |
| -30 +40 | >425 | 2 |
| -40 +100 | >150 | 95 |
| -100 | <150 | 3 |
Applications and Benefits:
- Filler metal for welding and alloying
- Enhances metal deposition rates
- Minimizes dust production and ensures solid joints
- Ideal for arc welding and industrial metalwork
Caution:
Handle with care. Review the Material Safety Data Sheet (MSDS) for safety and proper handling instructions.
Steel Powder, Iron Powder, Mesh 100
Coarse steel powder, mesh 100, is produced from recycled black steel (construction steel). It demonstrates strong magnetic attraction, high flow rate for dispensing from shakers, and is free from organic impurities such as cutting oils. This versatile iron powder is clean and preferred by educators for use in science experiments. It is also widely used for creating rust effects in sculptures and concrete, as well as a source of iron as a plant nutrient.
Specifications
| Material Source | Recycled black steel (construction steel) |
| Mesh Size | Mesh 100 |
| Magnetic Properties | Strong magnetic attraction |
| Organic Impurities | None |
| Carbon | 0.8% - 1.2% |
| Manganese | 0.35% - 1.2% |
| Silicon | 0.4% Minimum |
| Sulfur | 0.05% Maximum |
| Phosphorus | 0.05% Maximum |
Applications and Benefits:
- Used as iron filing for magnetism and electromagnetism experiments
- Preferred by educators for clean and contamination-free experiments
- Creates rust effects in sculptures, concrete, and structures
- Used as a plant nutrient for iron supplementation
- Strong magnetic properties for science and industrial applications
Caution:
This product is made from recycled steel and may rust over time. Handle with care. Review the Material Safety Data Sheet (MSDS) for proper handling and safety precautions.
Steel Powder, Spherical Mesh 16
Steel Powder, Spherical Mesh 16 is a high-quality steel powder that is used in various applications such as additive manufacturing, metal injection molding, and welding. This powder is made from spherical steel particles that have a diameter of 16 mesh, which makes it ideal for producing parts with high density and strength. The Steel Powder, Spherical Mesh 16 is also known for its excellent flowability and low oxygen content, which ensures the quality of the final product. Whether you are a manufacturer, engineer, or designer, Steel Powder, Spherical Mesh 16 is a reliable and efficient material that can help you achieve your goals.
Product Specifications:
| Product Name | Steel Powder |
| Shape | Spherical |
| Mesh Size | 16 |
Target Group:
- Manufacturing companies in the automotive industry
- Construction companies using steel for building projects
- Metalworking companies for welding and fabrication
- Maintenance and repair companies for machinery and equipment
- Research and development institutions for material science
- Industrial laboratories for testing and analysis
Similar Products
- Steel Dust
- Steel Granules
- Spherical Mesh 20 Steel Powder
- Spherical Mesh 12 Steel Powder
- Steel Shavings
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: This product contains steel powder which may pose a hazard if ingested or inhaled. Use appropriate protective measures when handling.
Test Tube Holder, Cross Pattern
The Test Tube Holder, Cross Pattern is an essential tool for any laboratory. Made from rolled brass strip with a spring clip, this holder is designed to handle test tubes ranging from 12 to 40 mm in outer diameter. The holder is mounted in a polished wooden handle, providing a comfortable grip during use. With an overall length of about 220mm, this holder is perfect for handling test tubes of various sizes. Whether you're a professional chemist or a student conducting experiments, the Test Tube Holder, Cross Pattern is a must-have tool for any laboratory.
Product Specifications:
| Product Name: | Test Tube Holder, Cross Pattern |
| Product Type: | Holder, Cross Test Tube Holder, Cross Pattern |
| Material: | Rolled Brass Strip |
| Spring Clip: | Yes |
| Handle Material: | Polished Wood |
| Overall Length: | 220mm |
| Test Tube Diameter: | 12mm to 40mm |
Similar Products
- Test Tube Rack, 12-40mm, Wooden Handle
- Test Tube Clamp, Brass Strip, 12-40mm
- Test Tube Holder, Spring Clip, 12-40mm
- Test Tube Carrier, Cross Pattern, 12-40mm
- Test Tube Gripper, Polished Wood Handle, 12-40mm
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: This test tube holder is designed for handling test tubes from 12 to 40 mm outer diameter. Please use with care and avoid any contact with hazardous materials. Keep out of reach of children.
U-Shaped Drying Tubes
The U-Shaped Drying Tubes, 175Mm X 20Mm, are a must-have for any home or professional laboratory. These tubes are used to house a disposable solid desiccant and require rubber stoppers with a hole on each end for connecting in and out gas tubes or air tubes. The drying tube is perfect for drying gases with granular desiccants, which are water absorbent chemicals. Made of borosilicate glass, this drying tube can be placed in direct flame for heating. The tooled ends for stoppers make it easy to use, and the "U" shape design makes it a space-saving option. With a length of 175mm and an outer diameter of 20mm, these tubes are versatile and efficient.
Key Features:
- U-shaped design for easy connection with gas or air tubes
- Made of durable borosilicate glass
- Can be placed in direct flame for heating
- Perfect for drying gases with granular desiccants
- Tooled ends for rubber stoppers
- Suitable for use in home or professional laboratories
Product Specifications:
| Product Name | U-Shaped Drying Tubes |
| Dimensions | 175mm x 20mm |
| Material | Borosilicate Glass |
| Usage | To house a disposable solid desiccant and dry gases with granular desiccants |
| Features | Can be placed in direct flame for heating, tooled ends for stoppers, "U" shaped |
Similar Products
- Borosilicate Glass Drying Tubes, U-Shaped, 200mm x 25mm
- Disposable Desiccant Drying Tubes, Straight, 150mm x 15mm
- Granular Desiccant Drying Tubes, T-Shaped, 250mm x 30mm
- Reusable Glass Drying Tubes, S-Shaped, 180mm x 20mm
- Chemical Drying Tubes, V-Shaped, 190mm x 22mm
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: This U-shaped drying tube should only be placed in direct flame for heating with caution. Make sure to use rubber stoppers with holes on each end for connecting in and out gas tubes or air tubes. Avoid contact with water or any other liquids that may cause the desiccant to become ineffective. Handle with care to avoid breakage.
Perfect for:
- Professional laboratories
- Home laboratories
- Chemists
- Scientists
- Researchers
- Students studying chemistry or science
X-Connector / Cross Connector
The X-Connector / Cross Connector is a tube connector that is designed to connect two tubes in a cross formation. It is commonly used in the construction of various structures, such as pelvis models for human anatomy studies. With its sturdy and reliable design, the X-Connector / Cross Connector is an essential component for any project that requires a strong and secure connection. Its versatility and ease of use make it a popular choice among professionals and hobbyists alike.
Product Specifications:
| Product Name | X-Connector / Cross Connector |
| Product Type | Tube Connector Connector |
| Application | Cross, Pelvis, Human, Throw |
| Compatibility | X-Connector / Cross Connector, Tube Connector |
Target Group: Medical Professionals and Researchers
- Orthopedic Surgeons
- Physical Therapists
- Biomechanical Engineers
- Medical Device Manufacturers
- Academic Researchers in Orthopedics and Biomechanics
- Medical Students and Residents
Plastic Y Connector
The Plastic Y Connector is a versatile tool that is ideal for any lab or experiment that requires tubes to be attached. Its durable construction ensures that it provides a secure connection and can withstand constant use.
Key Features
- Secure connection
- Inner tube diameter of 4 mm and outer diameter of 7 mm
- Head outer diameter of 8.5 mm for a secure connection
- Fits rubber tubes with inner diameter of 6 mm up to 8.5 mm and soft PVC tubes with inner diameter of 7 mm up to 8 mm
Product Specifications:
| Inner Tube Diameter | 4 mm |
| Outer Diameter | 7 mm |
| Head Outer Diameter | 8.5 mm |
| Fits Rubber Tubes | 6 mm up to 8.5 mm |
| Fits Soft PVC Tubes | 7 mm up to 8 mm |
Similar Products:
- Plastic T Connector
- Plastic L Connector
- Brass Y Connector
- Stainless Steel Y Connector
- Aluminum Y Connector
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: Ensure proper usage and handling of the Plastic Y Connector during experiments or labs to prevent hazards or accidents.
Perfect for:
- Laboratory experiments and scientific research
- 1