Burets with Screw Type PTFE Stopcock 50mL

Our Burets with Screw Type PTFE Stopcock 50mL are the perfect solution for precise measuring and dispensing of liquids in laboratory settings. The screw type PTFE stopcock ensures accurate control of flow rate and prevents any leakage. Made from high-quality materials, these burets are durable and can withstand harsh chemicals and extreme temperatures. Whether you are conducting experiments or analyzing samples, our Burets with Screw Type PTFE Stopcock 50mL are an essential tool for any laboratory.

Plastic 25Ml Burette

The Plastic 25Ml Burette is a laboratory tool that is commonly used for accurate measurement of liquid volumes. Made from high-quality plastic, this burette is durable and lightweight, making it easy to handle and use. Its clear and transparent design makes it easy to read the liquid level and ensure precise measurements. This burette is ideal for use in various laboratory applications, including titrations and other analytical procedures.

Carbon Rods Set

Carbon Rods Set is a collection of five highly conductive and resistant to acidic and alkaline solutions graphite rods. These rods are an excellent alternative to platinum electrodes for some electrolysis experiments. Each graphite rod is approximately 9 inches (20 cm) long and about 5 mm in diameter. Alligator clips can be used for making wire connections. The price is for a set of five carbon rods, and the minimum order quantity is one set. Bulk discounts or bulk pricing apply to all orders of 10 sets and more. This set of carbon rods is perfect for electrolysis of reactive materials and chemical solutions and other compounds.

Centrifuge Tubes, Conical Bottom, Graduated 10Mlh X O.D.110 X 15Mm

Centrifuge tubes with conical bottom and graduated markings, measuring 10Mlh X O.D.110 X 15Mm, are an essential tool for any laboratory or research facility. These tubes are designed to withstand high speeds and centrifugal forces, making them ideal for use in a centrifuge. The conical bottom allows for easy separation of samples, while the graduated markings ensure accurate measurements. Made from high-quality materials, these tubes are durable and reliable. Whether you're conducting experiments, performing tests, or analyzing samples, these centrifuge tubes are a must-have for any lab.

Crucible Triangle Clay Pipes

A pipeclay triangle is a piece of laboratory apparatus that is used to support a crucible being heated by a Bunsen burner or other heat source. The Crucible Triangle Clay Pipes is a specialized triangle that features 575-mm sides and is perfect for chemistry labs and research facilities. Each pipe is 50-mm long, and the triangular shape allows rounded crucibles of various sizes to rest in a stable way. The pipes are made of hollow ceramic, normally fire clay, tubes that allow the flame to heat the crucible directly.

Laboratory Support Stand with Triangular Cast Iron Base and Steel Rod

This assembly consists of a triangular cast iron base and a vertical plated steel rod, designed to function as a general-purpose laboratory support stand. The base is fabricated from high-mass cast iron to ensure a low center of gravity and high resistance to mechanical tipping. Its three-point geometry provides stable contact with the bench surface, compensating for minor surface irregularities and enhancing overall stability.

The base features a central threaded bore, machined to accept a 13 mm (1/2 in.) diameter rod with standard threading. The rod is composed of plated carbon steel, offering moderate corrosion resistance and sufficient rigidity under typical lab loading conditions. It has a total length of 500 mm (20 in.), suitable for vertical mounting of various laboratory fixtures such as clamps, rings, and holders.

To resist degradation in chemically active environments, the base is coated with a chemical-resistant enamel paint, which provides a protective barrier against spills and vapors encountered in routine laboratory operations.

Product Specifications

Applications and Benefits:

• Structural support in laboratory apparatus assemblies
• Vertical alignment for chemical processing setups
• Support for titration and distillation equipment
• Mounting instrumentation in thermal experiments
• Resistant to tipping and surface irregularities
• Corrosion resistance in chemically active environments

Caution:

Threaded connection must be fully engaged before load is applied. Verify mechanical stability before use to ensure safe operation.

Metal Electrodes, Set Of 6

This set of 6 metal electrodes is ideal for use in electrovoltaic cells or various chemistry and physics experiments. Each electrode is made from different metals, including iron, copper, zinc, aluminum, steel, and magnesium. The electrodes are carefully sized at approximately 120mm x 18mm x 0.75mm (5" x 1/2" x 1/32"), making them easy to handle and suitable for classroom or laboratory use. Their consistent dimensions and material composition ensure reliable performance during experiments. These electrodes are perfect for students, educators, or lab technicians looking to demonstrate electrochemical reactions or explore the properties of different metals in practical experiments.

The set of metal electrodes includes various metals that are commonly used in experiments involving electrovoltaic (or galvanic) cells, electrochemistry, and other physics and chemistry experiments. Here's a brief overview of how these metals might be used:

1. Iron (Fe)

• Properties: Iron is a reactive metal and can oxidize easily.
• Use: Commonly used in electrochemical reactions, such as rusting experiments, or as one electrode in electrochemical cells.

2. Copper (Cu)

• Properties: Copper is a good conductor of electricity and is relatively unreactive compared to other metals.
• Use: Frequently used as a positive electrode in electrovoltaic cells, due to its stability and conductive properties.

3. Zinc (Zn)

• Properties: Zinc is highly reactive and easily gives up electrons.
• Use: Commonly used as the negative electrode in electrochemical cells, like in a simple zinc-copper battery.

4. Aluminum (Al)

• Properties: Aluminum is a lightweight, reactive metal with a natural oxide layer that protects it.
• Use: Often used in chemical reactions to produce hydrogen or as an electrode in electrolytic cells.

5. Steel (an alloy of iron)

• Properties: Steel is more resistant to corrosion than pure iron, thanks to the presence of carbon and sometimes other elements.
• Use: Steel can be used in experiments similar to iron, but it is less prone to rusting.

6. Magnesium (Mg)

• Properties: Magnesium is a highly reactive metal, often used in pyrotechnics due to its bright flame when ignited.
• Use: Magnesium is frequently used in electrochemical cells as a very reactive metal, often as a negative electrode.

Applications:

• Electrovoltaic Cells (Galvanic Cells): You can use these metals to build simple electrovoltaic cells, where two different metals act as electrodes and a solution (electrolyte) allows ions to flow, generating electricity.
• Corrosion and Rusting Experiments: The set can be used to observe how different metals react with the environment (such as exposure to water or air).
• Electrolysis: These metals can be used in electrolysis experiments to separate chemical compounds into their elemental forms using an electrical current.

Key Features

• Set of 6 metal electrodes: iron, copper, zinc, aluminum, steel, magnesium
• Ideal for electrovoltaic cells and experiments
• Electrodes Aprox measure 127mm x 18mm x 1mm (5" x 1/2" x 1/32")
• Durable and reliable for laboratory use
• Suitable for chemistry and physics experiments
• Perfect for educators, students, and lab professionals

Product Specifications

Porcelain Mortar And Pestle

If you're looking for a high-quality mortar and pestle for your laboratory needs, look no further than this Porcelain Mortar and Pestle. With a diameter of 130 mm and a volume of 320 ml, this large-sized set is perfect for a variety of applications. Made from high-quality raw materials, the Anchor Brand Laboratory Porcelain is uniform and dense, providing stable mechanical strength and little permeability. When used properly, the glazed pieces can withstand temperatures of 1050?C, while the unglazed pieces can withstand temperatures of 1350?C. Whether you're grinding up herbs or mixing chemicals, this Porcelain Mortar and Pestle is an excellent choice.

Plastic Beakers, Griffin Style 100ml

These single-piece, molded translucent polypropylene plastic beakers are perfect for laboratory use. They feature raised numerical graduations on the outside and are resistant to most common acids, bases, and solvents. Additionally, they have a broad base for stability and pouring spouts. These beakers are autoclavable to 130 degrees C and do not have a meniscus.

Product Specifications:

Similar Products

• Griffin Style Plastic Beakers
• Plastic Graduated Cylinders
• Glass Beakers, Griffin Style
• Plastic Erlenmeyer Flasks
• Glass Graduated Cylinders

CAUTION: Autoclavable to 130 degrees C. Handle with care and follow proper safety procedures when using and handling hot beakers.

Perfect for:

• Science students and teachers
• Laboratory technicians
• Chemistry enthusiasts
• Research facilities
• Medical professionals
• Industrial labs

Plastic Beakers, Set Of 3 (Small, Medium, Large)

Looking for a versatile set of beakers for your lab? Look no further than this set of 3 plastic beakers! Made from durable plastic, these beakers come in small, medium, and large sizes, making them perfect for a variety of experiments and measurements. Whether you're a student, researcher, or hobbyist, these beakers are sure to come in handy.

Retort Stand

A retort stand is an essential piece of equipment in any laboratory. This particular retort stand is made of durable white plastic and comes with a stand to hold it securely in place. It is perfect for holding various types of glassware during experiments and can withstand high temperatures. The white color of the stand also makes it easy to spot any spills or leaks. Invest in this high-quality retort stand for your laboratory needs.

Spotting Plate, Porcelain, 12 Cavity Plate

This Porcelain Cavity Plate is perfect for observing color reactions and temporary storage of small specimens and solutions. It has 12 depressions that are 22mm in diameter and 8mm deep, making it ideal for use in semi-micro chemistry. The top and sides of the plate are glazed for durability and easy cleaning. Whether you are a professional chemist or a student, this spotting plate is a must-have in your laboratory equipment collection.

Test Tube Holder, Cross Pattern

The Test Tube Holder, Cross Pattern is an essential tool for any laboratory. Made from rolled brass strip with a spring clip, this holder is designed to handle test tubes ranging from 12 to 40 mm in outer diameter. The holder is mounted in a polished wooden handle, providing a comfortable grip during use. With an overall length of about 220mm, this holder is perfect for handling test tubes of various sizes. Whether you're a professional chemist or a student conducting experiments, the Test Tube Holder, Cross Pattern is a must-have tool for any laboratory.