Advanced Search Results
Refine your search by using the category filter.
Easily dispersed powder, modifies viscosity and rheology, nonionic agent.
Bromothymol Blue Solution 0.04%
Strong solution of Bromothymol Blue (also known as bromothymol sulfone phthalein, Bromthymol Blue, and BTB) is a chemical indicator for weak acids and bases. In the pH of 6.0 or lower, it is yellow. It changes color between the pH of 6 to 7.6 when it becomes completely blue at the pH 7.6. This is a prepared solution and is ready for use. May be used as an acid/base indicator or as a stain for cell walls or nuclei.
Product Specifications
| Concentration | 0.04% |
| pH Range | 6.0 (yellow) to 7.6 (blue) |
| Uses | Acid/base indicator, cell staining |
Applications and Benefits:
- Effective chemical indicator for weak acids and bases.
- Color transition for precise pH measurement in the range of 6.0-7.6.
- Useful as a stain for cell walls and nuclei in biological studies.
- Ready-to-use solution for laboratory applications.
Caution:
Use with care in laboratory settings. Follow standard safety protocols for handling chemicals.
Hydroxyethyl Cellulose HEC 250 HHBR
HEC (Hydroxyethylcellulose) is a nonionic thickener and rheology modifier for water-based products. It is commonly used in detergents, cleaners, shampoos, conditioners, body washes, lotions, paints, coatings, adhesives, and other aqueous formulations requiring viscosity control and stable flow properties. This grade of HEC with designation 250 HHBR offers delayed hydration along with enhanced resistance to biological and chemical degradation. The rheology characteristics of the HHBR grade help provide stable viscosity performance in surfactant-based and industrial aqueous systems. A 1% preparation of HEC250HHBR in water typically produces a viscosity of approximately 3400 to 5500 cps. HEC250HHBR is an off-white granular powder that disperses and dissolves in cold or hot water to form smooth clear solutions with pseudoplastic flow behavior. Chemically, it is cellulose ether modified with hydroxyethyl groups to provide thickening, stabilization, water retention, suspension, and rheology control properties. For cold or room temperature preparation, continuous agitation for approximately 30 minutes is recommended to achieve full hydration and uniform viscosity development. HEC complies with applicable U.S. Food and Drug Administration requirements for certain food-contact surface applications as specified in the Code of Federal Regulations, Title 21. This grade of HEC does not comply with USP/FCC requirements for pharmaceutical applications. Perfect for detergent formulators, coating manufacturers, adhesive producers, industrial manufacturers, and personal care developers.
Product Specifications
| Product Name | Hydroxyethyl Cellulose HEC 250 HHBR |
| CAS Number | 9004-62-0 |
| CAS Name | Cellulose, 2-hydroxyethyl ether |
| Appearance | Off-white granular powder |
| Moisture Content | 5% Max |
| pH of Solution | 6.0 to 8.5 |
| Particle Size | Passes U.S. Mesh 325 |
| Viscosity | 3400 to 5500 cps, 1% solution |
| Hydration | Delayed hydration grade |
| Preparation | Continuous agitation for approximately 30 minutes is recommended for cold or room temperature preparation. |
Applications and Benefits:
- Nonionic thickener and rheology modifier for water-based products.
- Provides viscosity control and stable flow properties in aqueous formulations.
- Delayed hydration grade for controlled dispersion and hydration.
- Enhanced resistance to biological and chemical degradation.
- Stable viscosity performance in surfactant-based and industrial aqueous systems.
- Disperses and dissolves in cold or hot water to form smooth clear solutions.
- Provides pseudoplastic flow behavior.
- Supports thickening, stabilization, water retention, suspension, and rheology control.
- Compatible with many surfactants, polymers, salts, and formulation additives.
- Suitable for formulations exposed to microbial growth conditions or long-term storage instability.
- Used in detergents and household cleaners.
- Used in shampoos, conditioners, body washes, lotions, and personal care products.
- Used in water-based paints and coatings.
- Used in adhesives and latex systems.
- Used in industrial aqueous formulations and pigment dispersions.
- Suitable for detergent formulators, coating manufacturers, adhesive producers, industrial manufacturers, and personal care developers.
Caution:
This grade of HEC does not comply with USP/FCC requirements for pharmaceutical applications. Review applicable regulatory requirements before use.
Hydroxyethyl Cellulose HEC 250 HX
HEC (Hydroxyethylcellulose) is a nonionic thickener and rheology modifier for water-based products. It is commonly used in paints, coatings, detergents, cleaners, shampoos, lotions, adhesives, and other aqueous formulations where viscosity control and smooth flow properties are desired. This grade of HEC with designation 250 HX is designed for delayed hydration and improved dispersion during mixing operations. The controlled hydration characteristics help reduce fisheyes and lump formation, making it easier to incorporate into water-based systems, especially in larger production batches. A 1% preparation of HEC250HX in water typically produces a viscosity of approximately 3400 to 5500 cps. HEC250HX is an off-white granular powder that disperses and dissolves in cold or hot water to form clear solutions with pseudoplastic flow behavior. Chemically, it is cellulose ether modified with hydroxyethyl groups to provide thickening, water retention, stabilization, suspension, and rheology control properties. For cold or room temperature preparation, continuous agitation for approximately 30 minutes is recommended to achieve full hydration and uniform viscosity development.
Product Specifications
| Moisture Content | 5% Max |
| pH of Solution | 6.0 to 8.5 |
| Particle Size | Passes U.S. Mesh 325 |
| Viscosity | 3400 to 5500 cps, 1% solution |
| CAS Number | 9004-62-0 |
| CAS Name | Cellulose, 2-hydroxyethyl ether |
| Appearance | Off-white granular powder |
| Hydration Profile | Delayed hydration grade for improved dispersion |
| Regulatory Status | Complies with applicable U.S. FDA requirements for certain food-contact surface applications as specified in CFR Title 21. Does not comply with USP/FCC requirements for pharmaceutical applications. |
Applications and Benefits:
- Designed for applications requiring easier dispersion and controlled viscosity build.
- Delayed hydration profile allows particles to separate more effectively before full thickening occurs.
- Helps improve mixing efficiency and minimize agglomeration.
- Compatible with many surfactants, polymers, salts, and formulation additives due to its nonionic nature.
- Used as a thickener, stabilizer, water retention aid, and suspension agent in water-based systems.
- Suitable for water-based paints and coatings.
- Suitable for detergents and household cleaners.
- Suitable for adhesives and latex systems.
- Suitable for personal care formulations, including shampoos and lotions.
- Suitable for pigment dispersions and industrial aqueous formulations.
- Perfect for coating manufacturers, detergent formulators, adhesive producers, industrial manufacturers, and personal care developers.
Caution:
For cold or room temperature preparation, continuous agitation for approximately 30 minutes is recommended to achieve full hydration and uniform viscosity development. This grade does not comply with USP/FCC requirements for pharmaceutical applications. Review the Safety Data Sheet before handling. ADD SDS LINK HERE
Iodine Solution (29 Ml., 1 Fl. Oz.)
Introducing our Iodine Solution, specifically designed for starch tests. This solution contains iodine and has a volume of 29 ml or 1 fl oz. It is perfect for laboratory use and can help in detecting the presence of starch in various materials. Use it to enhance your experiments and research with accurate results.
Product Specifications:
| Product Name | Iodine Solution (29 Ml., 1 Fl. Oz.) |
| Product Type | Solution |
| Intended Use | Iodine Solution For Starch Test. |
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for:
- Science teachers and students conducting starch tests
- Chemistry enthusiasts and professionals
- Medical professionals using iodine solution for disinfecting wounds
- Individuals with iodine deficiencies
- People looking for a reliable iodine supplement
- Lab technicians and researchers using iodine solution in experiments
Caution: Iodine solution is a hazardous substance and should be handled with care. Avoid contact with skin and eyes. Keep out of reach of children. Only use for intended purpose of starch test. If ingested, seek medical attention immediately.
For MSDS Go to Downloads TabPhenolphthalein
Phenolphthalein (C20H14O4) is an organic compound used as an acid-base indicator. It is prepared using alcohol as a solvent due to its poor solubility in water. The indicator has a visual transition interval that is colorless at pH 8.0, pink at 8.5 and red at pH 10.0.
Key Features:
- Organic compound
- Used as an acid-base indicator
- Colorless at pH 8.0, pink at pH 8.5, and red at pH 10.0
- Poorly soluble in water, typically prepared using alcohol as a solvent
Product Specifications:
| CAS No. | 7220-79-3 |
| Formula | C16H18ClN3S . 3H2O |
| Application | For use in histology, bacteriology (staining), compounding of blood stains, anti-fungus treatment on fish eggs. It can also be used as a protozoacide and a fungicide. |
Perfect for: laboratories, educational institutions, and research facilities.
Sodium C14-16 Olefin Sulfonate 40% Solution
AOS-40 is a 40% solution of sodium C14-16 alpha olefin sulfonate that offers high foaming power, good emulsification, skin mildness, and excellent lime soap dispersion. Perfect for sulfate-free personal care and detergent products. Recommended for use in personal care, household, industrial detergents, and car wash products.
Product Specifications
| CAS # | 68439-57-6 |
| pH (10% solution) | 7.0 - 9.0 |
| Active | 38.0% - 40.0% |
| Undulf(on)ated | 1.25% Max |
| Color (5% Active, 40mm) | 60 Klett Max |
Applications and Benefits:
- High foaming power with excellent lime soap dispersion.
- Skin mildness ideal for sulfate-free personal care products.
- Enhanced pH stability compared to alcohol sulfates.
- Effective in household, industrial detergents, and car wash products.
- Improved viscosity and foam characteristics for formulations.
Caution:
Use only as directed. Avoid direct contact with eyes. Store in a cool, dry place.
Sodium Silicate, Powder, High Alkaline (SSGD)
Sodium Silicate (Water Glass) is a fine, white, high alkaline powder with a SiO₂ to Na₂O ratio of 2. It dissolves quickly and easily in water to form a hazy, colorless colloidal solution with a pH of 11.5 for a 1% solution. SSGD is widely used in specialized non-flammable coatings, refractory cements, adhesives, binders, agriculture, detergents, and construction materials. This product is sensitive to moisture and should be stored in tightly closed containers.
Product Specifications
| Wt. Ratio SiO₂/Na₂O | 2 |
| % Na₂O | 27.0% |
| % SiO₂ | 54.00% |
| % H₂O | 18.00% |
| Density | 0.73 g/cm³ |
| Characteristics | Fine white powder |
| CAS Number | 1344-09-8 |
Applications and Benefits:
- Refractory cements for high-temperature applications
- Non-flammable coatings and adhesives
- Used in construction materials and detergents
- Agricultural uses for soil improvement and binding
- Forms a stable colloidal solution for various industrial purposes
Handling and Storage:
- Store in tightly closed containers to avoid moisture exposure
- Keep in a cool, dry place to maintain product integrity
Caution:
Handle with appropriate protective equipment. Avoid inhalation of dust and contact with skin or eyes. Consult SDS for detailed safety information.
Sodium Silicate, Powder, Low Alkaline (SSG)
DOWNLOAD SPECIFICATIONSSodium Silicate (Water Glass) is a fine, white powder with a SiO2 to Na2O ratio of 3.22, the same as SSO and SSN liquid sodium silicates. When dissolved, it forms a hazy, colorless colloidal solution. SSG sodium silicate is used in specialized refractory compounds and acid-resistant cements. It functions as a binder for powdered materials intended for use in high-temperature and/or acid-resistant cements and other applications.
Product Specifications
| Wt. Ratio SiO2/Na2O | 3.22 |
| % Na2O | 19.2% |
| % SiO2 | 61.8% |
| % H2O | 18.5% |
| Density | 0.70 g/cm³ |
| Total Aluminum | 13 ppm |
| Total Arsenic | 0.018 ppm |
| Total Cadmium | < 0.010 ppm |
| Total Lead | 0.407 ppm |
| Total Mercury | < 0.010 ppm |
| CAS Number | 1344-09-8 |
Applications and Benefits:
- Used in refractory compounds
- Binder for powdered materials
- Ideal for acid-resistant and high-temperature cements
- Forms a colloidal solution when dissolved
Caution:
Store in a cool, dry place. Avoid inhalation of dust and contact with eyes. Use appropriate protective equipment when handling.
Liquid Sodium Silicate (Water Glass) Solution (30–40%)
Liquid Sodium Silicate, also known as Water Glass, is a multi-purpose product with a variety of applications. It has a weight ratio of 3.22 and a 40 Baume density. It is commonly used as a foundry-grade, ceramic-grade, and carton adhesive-grade product. It can also be used as a deflocculant to prevent shrinkage of greenware, for surface application to create an instant antique look, to solidify and create an instant solid sand mold for metal castings, as a sealer for plaster and concrete surfaces, and as a treatment for wood to make it water-resistant and insect-free. When applied as a thin layer between surfaces to be bonded, it can also be used as an extraordinarily high-temperature adhesive and bonding agent. Note that liquid sodium silicate has a high alkaline level of 11.3 pH.
Product Specifications
| Chemical Name | Sodium Silicate Solution |
| Synonyms | Water Glass, Sodium Silicate Solution |
| CAS Number | 1344-09-8 |
| Wt. Ratio SiO2/Na2O | 3.22 |
| %Na2O | 8.9 |
| %SiO2 | 28.7 |
| Density @ 68°F (20°C) °Be' | 41.0 |
| Density @ 68°F (20°C) lb/gal | 11.6 |
| Density @ 68°F (20°C) g/cm3 | 1.38 |
| pH | 11.3 |
| Viscosity | 180 cP |
| Characteristics | Syrupy Liquid |
| Grade | Foundry-grade, ceramic-grade, carton adhesive-grade |
Applications and Benefits:
- Used as a foundry-grade binder for instant solid sand molds in metal castings.
- Can be diluted to lower concentrations as required
- Used in ceramic applications as a deflocculant to help prevent greenware shrinkage.
- Suitable for carton adhesive applications and other bonding uses.
- Can be applied to surfaces to create an instant antique look.
- Used as a sealer for plaster and concrete surfaces.
- Can be used as a wood treatment to improve water resistance and help deter insects.
- Functions as a high-temperature adhesive and bonding agent when applied in a thin layer between surfaces.
- Used in adhesives and binders, agriculture, cements and construction materials, detergents, drilling, geotechnical and mineral processing, manufacture of other chemicals, pulp and paper, textiles, and water treatment.
Caution:
Liquid sodium silicate has a high alkaline level of 11.3 pH. Use care when handling this product and wear gloves and eye protection to prevent the possibility of burns.
- 1