Advanced Search Results
Refine your search by using the category filter.
Wide-range dispersion for safe, effective less-lethal large-wildlife control.
Precision 50-mesh iron pellets for safe pyrotechnic and training rounds.
Steel Powder, Iron Powder, 250 Micron
Coarse steel powder (S100N) is produced from recycled black steel (construction steel) with improved features like dust-free, equal-size, and mostly spherical particles. It demonstrates strong magnetic attraction, has a high flow rate for dispensing from shakers, and is free from organic impurities such as cutting oil. This product is ideal for educational and industrial applications, including magnetism experiments, rust effect creation, and as a plant nutrient for iron supplementation.
Specifications
| Product Type | Recycled Black Steel (Construction Steel) |
| Particle Size | 250 Micron |
| Special Features | Dust-free, Spherical Particles, High Flow Rate |
| Magnetic Properties | Strong Magnetic Attraction |
| Organic Impurities | None |
| Carbon (C) | 0.8% - 1.2% |
| Manganese (Mn) | 0.35% - 1.2% |
| Silicon (Si) | 0.4% Minimum |
| Sulfur (S) | 0.05% Maximum |
| Phosphorus (P) | 0.05% Maximum |
Applications and Benefits:
- Used as iron filings for magnetism and electromagnetism experiments
- Preferred for educational use due to cleanliness and contamination-free particles
- Creates rust effects in sculptures, concrete, and structures
- Serves as a plant nutrient for iron supplementation
- High flow rate makes it suitable for dispensing from shakers
Caution:
This product may rust over time due to its recycled steel composition. Handle with care and review the Material Safety Data Sheet (MSDS) for safety precautions.
Brass Ball, 1" Solid
Brass Ball, 1" Solid is a high-quality ball made of brass that is perfect for physics experiments. It is a corrosion-resistant ball that provides excellent resistance to water and other corrosive agents. This ball is substantially lower in cost than other corrosion-resisting balls, making it an economical choice for many valve applications. The Grade 1000 brass balls are ideal for use in physics experiments and have the ability to resist the corrosive effects of fuel oil, gasoline, butane, dry carbon dioxide, benzene, lime-sulphur mixture, and similar chemical agents.
Key Features:
- 1" solid brass ball
- Excellent resistance to corrosion by water
- Lower cost compared to other corrosion-resisting balls
- Ability to resist corrosive effects of various chemical agents
- Grade 1000
- Great for physics experiments and valve applications requiring small-size balls
Product Specifications:
| Product Name | Brass Ball, 1" Solid |
| Material | Brass |
| Application | Physics Experiments, Valve Applications |
| Resistance | Excellent resistance to corrosion by water, fuel oil, gasoline, butane, dry carbon dioxide, benzene, lime-sulphur mixture and similar chemical agents |
| Grade | 1000 |
Similar Products
- Stainless Steel Ball, 1" Solid - Provides excellent resistance to corrosion and is frequently used in valve applications requiring small-size balls. Grade 1000.
- Aluminum Ball, 1" Solid - Lightweight and corrosion-resistant, ideal for use in physics experiments. Grade 1000.
- Titanium Ball, 1" Solid - Offers superior corrosion resistance and strength, suitable for use in harsh environments. Grade 1000.
- Chrome Steel Ball, 1" Solid - Provides high hardness and wear resistance, suitable for use in industrial applications. Grade 1000.
- Carbon Steel Ball, 1" Solid - Offers good strength and toughness, ideal for use in heavy-duty applications. Grade 1000.
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution Note: This product contains brass which may cause skin irritation or allergic reactions in some individuals. Please handle with care and use protective gloves if necessary.
Perfect for:
- Physics teachers and students
- Science enthusiasts
- Valve manufacturers
- Chemical processing plants
- Mechanical engineers
- Industrial equipment manufacturers
Brass Electrodes
These high‑purity brass electrodes are composed of a 65 % copper and 35 % zinc alloy, each weighing 16 g and measuring 19 mm × 125 mm. Stamped with the identification code “BS” and supplied in individual packaging, they are suited for detailed physical and chemical investigations of brass alloys.
Product Specifications
| Material | High purity brass |
| Dimensions | 19 mm × 125 mm (3/4 × 5 inches) |
| Weight | 16 g |
| Composition | ≈ 65 % copper, 35 % zinc |
| Identification Code | Stamped with “BS” |
| Caution | Metal electrodes have sharp edges. |
Applications and Benefits:
- Investigating the physical and chemical properties of brass alloys in chemistry labs.
- Demonstrating alloy composition and conductivity in educational settings.
- Adding to personal or institutional collections of metal specimens.
Key Features and Benefits
- High‑purity brass ensures consistent experimental results.
- Precise dimensions (19 mm × 125 mm) facilitate standardized testing.
- Clear “BS” identification code simplifies sample tracking.
- Individual packaging protects each electrode from contamination.
- Sharp‑edge caution highlighted for safe handling.
Caution:
Metal electrodes have sharp edges; handle with care to avoid injury.
Crucible Tongs 10" Stainless Steel
These Crucible Tongs are essential for handling hot crucibles and similar apparatus in laboratory settings. Made from stainless steel with corrugated tips, they provide a secure grip. The design includes a durable riveted joint and large finger openings for comfort. Their length is about 10" (254 mm), making them suitable for both professional and home labs.
Product Specifications
| Material: | Stainless Steel |
| Length: | 10" (254 mm) |
| Weight: | 1020 gr |
| Tip Type: | Corrugated |
| Joint Type: | Riveted |
Applications and Benefits:
- Handling hot crucibles and similar apparatus in laboratory settings
- for professional and home labs
Key Features:
- Secure grip due to corrugated tips
- Durable riveted joint
- Large finger openings for comfort
Caution:
Always exercise caution when handling hot apparatus and use appropriate protective equipment.
Crucible Tongs 8" Stainless Steel
These Crucible Tongs are essential for handling hot crucibles and similar apparatus in laboratory settings. Made from stainless steel with corrugated tips, they provide a secure grip. The design includes a durable riveted joint and large finger openings for comfort. Their length is about 200 mm, making them suitable for both professional and home labs. The weight of these tongs is approximately 100 grams, ensuring safe and easy handling of hot apparatus.
Product Specifications
| Material: | Stainless Steel |
| Length: | 200 mm |
| Weight: | 100 gr |
| Tip Type: | Corrugated |
| Joint Type: | Riveted |
| Grip Type: | Secure |
Applications and Benefits:
- Handling hot crucibles and similar apparatus in laboratory settings
- Safe and easy handling of hot apparatus
- for professional and home labs
Key Features and Benefits
- Durable stainless steel construction
- Corrugated tips for secure grip
- Durable riveted joint
- Large finger openings for comfort
Caution:
Always exercise caution when handling hot apparatus and use appropriate protective equipment.
Brass Metal Cubes
Looking for high-quality brass cubes for density comparison and experimentation? Look no further than our Brass Metal Cubes! Available in both 10mm and 20mm sizes, these precision machined cubes are made from top-quality brass material.
Key Features:
- Precision machining
- High-quality brass material
- Available in 10mm or 20mm sizes
Product Specifications:
| Material | Brass |
| Density | 8.4 g/cm3 |
| Size Options | 10mm or 20mm |
| Weight | Varies by size |
Similar Products:
- Copper Metal Cubes
- Aluminum Metal Cubes
- Titanium Metal Cubes
- Steel Metal Cubes
- Nickel Metal Cubes
CAUTION: Handle with care. These brass metal cubes are for experimentation and density comparison purposes only. Keep out of reach of children and avoid ingestion or inhalation. Similar products may have different properties and require research before use.
Perfect for:
- Science teachers and students
- Laboratory technicians
- Chemistry enthusiasts
- Researchers and scientists
- Engineering students
- College and university professors
Knife Switch Spdt (Brass Contacts And Steel Screws)
The Knife Switch Spdt (Brass Contacts And Steel Screws) is a versatile switch that is perfect for a variety of applications. This switch is made from high-quality materials, including brass contacts and steel screws, which ensure its durability and longevity. The knife switch design allows for easy operation and quick switching between circuits. Whether you're an electronics enthusiast or a professional electrician, the Knife Switch Spdt (Brass Contacts And Steel Screws) is a reliable and efficient choice for your needs.
Product Specifications:
| Product Name | Knife Switch Spdt (Brass Contacts And Steel Screws) |
| Type | Switch, Knife |
| Material | Brass, Steel |
| Contacts | Brass |
| Screws | Steel |
| Description | Knife Switch Spdt (Brass Contacts And Steel Screws) |
Perfect for:
- Electricians and electrical engineers
- DIY enthusiasts
- Industrial and manufacturing companies
- Schools and universities with electrical engineering programs
- Electronics hobbyists
- Research and development laboratories
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: This knife switch contains brass contacts and steel screws which may create a hazard if not handled properly. Please exercise caution when using this product.
MicroShield Fine Control 100
MicroShield Fine Control 100 is engineered to deliver a precise, non-lethal particle dispersion, using high-quality, 100 mesh iron pellets. Each pellet generates minimal impact, creating heat bursts and noise that effectively support wildlife control and safe training exercises. Made from recycled black construction steel, these coarse particles have a high flow rate suitable for dispensing from a shaker. The material is magnetically responsive and rusts naturally over time, making it ideal for environmental science experiments, art installations, and even plant nutrient applications.
The S100N model is an upgraded version, free of dust and with uniform, spherical particles. This premium composition makes it popular in educational settings, particularly in magnetism or electromagnetism experiments, as it is devoid of cutting oils and contaminants. This steel powder's chemical analysis ensures its purity and stability, with specific concentrations of carbon, manganese, and silicon to maintain consistent performance.
Key Features
- 100 mesh iron pellets for minimal impact dispersion
- Safe, non-lethal applications for wildlife and training
- High flow rate for controlled distribution from shakers
- Recycled construction steel; rusts naturally
- Dust-free, uniform, spherical particle design in S100N model
- Versatile in education, art, and plant nutrient uses
Product Specifications
| Material | Recycled black construction steel |
| Mesh Size | 100 mesh |
| Carbon | 0.8% - 1.2% |
| Manganese | 0.35% - 1.2% |
| Silicon | 0.4% Minimum |
| Sulfur | 0.05% Maximum |
| Phosphorus | 0.05% Maximum |
Perfect for wildlife control, training professionals, educators, artists, and agricultural experts
Here’s an table with suggested deterrent loads for several common shotgun gauges (12, 16, 20, and 28) using fine iron particles (100 mesh) for bird deterrent purposes. These configurations are generalized for typical effective ranges and use a combination of lower powder loads to create a wide, non-lethal dispersal pattern that is suitable for scaring birds.
Bird Deterrent Loads Using Iron Particles (100 Mesh) Across Various Gauges
| Gauge | Load Type | Iron Particle Load | Powder Charge | Estimated Velocity | Effective Range |
|---|---|---|---|---|---|
| 12 Gauge | Light Deterrent | 15 g (0.53 oz) | 16-18 gr (0.37-0.42 oz) | 250-300 m/s (820-984 ft/s) | 10-20 meters (33-66 ft) |
| Standard Deterrent | 20 g (0.71 oz) | 18-20 gr (0.42-0.46 oz) | 300-350 m/s (984-1148 ft/s) | 20-30 meters (66-98 ft) | |
| Heavy Deterrent | 25 g (0.88 oz) | 20-22 gr (0.46-0.5 oz) | 350-400 m/s (1148-1312 ft/s) | 30-40 meters (98-131 ft) | |
| 16 Gauge | Light Deterrent | 12 g (0.42 oz) | 14-16 gr (0.32-0.37 oz) | 230-280 m/s (754-919 ft/s) | 10-20 meters (33-66 ft) |
| Standard Deterrent | 18 g (0.63 oz) | 16-18 gr (0.37-0.42 oz) | 280-330 m/s (919-1083 ft/s) | 20-30 meters (66-98 ft) | |
| Heavy Deterrent | 22 g (0.78 oz) | 18-20 gr (0.42-0.46 oz) | 330-380 m/s (1083-1247 ft/s) | 30-40 meters (98-131 ft) | |
| 20 Gauge | Light Deterrent | 10 g (0.35 oz) | 12-14 gr (0.27-0.32 oz) | 220-270 m/s (722-886 ft/s) | 10-20 meters (33-66 ft) |
| Standard Deterrent | 15 g (0.53 oz) | 14-16 gr (0.32-0.37 oz) | 270-320 m/s (886-1050 ft/s) | 20-30 meters (66-98 ft) | |
| Heavy Deterrent | 18 g (0.63 oz) | 16-18 gr (0.37-0.42 oz) | 320-370 m/s (1050-1214 ft/s) | 30-40 meters (98-131 ft) | |
| 28 Gauge | Light Deterrent | 8 g (0.28 oz) | 10-12 gr (0.23-0.27 oz) | 210-260 m/s (689-853 ft/s) | 10-20 meters (33-66 ft) |
| Standard Deterrent | 10 g (0.35 oz) | 12-14 gr (0.27-0.32 oz) | 250-300 m/s (820-984 ft/s) | 20-30 meters (66-98 ft) | |
| Heavy Deterrent | 12 g (0.42 oz) | 14-16 gr (0.32-0.37 oz) | 300-350 m/s (984-1148 ft/s) | 30-40 meters (98-131 ft) |
Notes on Each Gauge:
- 12 Gauge: Best suited for moderate to heavy deterrent loads due to its higher capacity for both powder and particle loads, making it effective at longer ranges.
- 16 Gauge: A versatile option that offers a good balance between spread and range. Common in European hunting and bird deterrent contexts.
- 20 Gauge: Known for being lighter and easier to handle, making it suitable for closer-range deterrent applications.
- 28 Gauge: Ideal for short-range deterrent due to its lower recoil and capacity, typically for distances under 30 meters.
Important Considerations
- Testing and Customization: Load performance can vary based on powder type, shell type, and even environmental conditions. Testing in a controlled environment is essential.
- Safety First: Always consult a reloading manual and verify with experts, especially when using alternative materials like fine iron particles.
This table serves as a starting point; precise adjustments may be necessary depending on the equipment and specific needs. For more details on load specifications, consult reputable reloading sources or professional guidance.
For MSDS Go to Downloads Tab
MicroShield Max Disperse 16
MicroShield Max Disperse 16 is designed to deliver broad, safe, and effective wildlife control in various settings. These larger iron pellets, with a 16-mesh particle size, are engineered to disperse over a wide area, creating noise and low-impact deterrence suitable for agricultural and industrial applications. Built from a low-carbon magnesium steel alloy, each pellet measures approximately 0.8 to 1 millimeter in diameter, with about 95% of the particles forming individual spheres, while the remainder are spheroidal clusters. With an apparent density of 4.4 g/cc, this product is dependable for less-lethal control, helping manage wildlife presence safely and effectively.
Key Features
- 16 mesh-sized iron pellets for wide-area coverage
- Low-impact and less-lethal deterrence for wildlife control
- 0.8 to 1 mm diameter for controlled dispersion
- Constructed with low-carbon magnesium steel alloy
- Reliable for use in agricultural and industrial settings
- Apparent density of 4.4 g/cc for effective dispersal
Product Specifications
| Material | Low-carbon magnesium steel alloy |
| Mesh Size | 16 |
| Pellet Diameter | 0.8 - 1 mm |
| Apparent Density | 4.4 g/cc |
| Primary Use | Wildlife control in agricultural/industrial settings |
Perfect for agricultural professionals, industrial site managers, wildlife control agencies, environmental and conservation agencies, and rural facility managers.
16 mesh iron particles are optimized to deliver broader coverage with heavier particles (approx. 1.19 mm), achieving an enhanced deterrent effect over larger areas. The larger particle size maintains momentum over increased distances, ideal for settings where extended range is beneficial. Configurations are available across multiple shotgun gauges, ensuring consistent performance across both close and mid-range applications.
With careful calibration, each load type—light, standard, and heavy—incorporates powder charges specifically adjusted to produce controlled dispersal and impact, maximizing deterrence without harm. Below is a detailed table of specifications per gauge, suited to cover effective ranges as specified:
Bird Deterrent Loads Using 16 Mesh Iron Particles Across Various Gauges
| Gauge | Load Type | Iron Particle Load | Powder Charge | Estimated Velocity | Effective Range |
|---|---|---|---|---|---|
| 12 Gauge | Light Deterrent | 25 g (0.88 oz) | 12-14 gr (0.27-0.32 oz) | 200-250 m/s (656-820 ft/s) | 10-20 meters (33-66 ft) |
| Standard Deterrent | 30 g (1.06 oz) | 14-16 gr (0.32-0.37 oz) | 250-300 m/s (820-984 ft/s) | 20-30 meters (66-98 ft) | |
| Heavy Deterrent | 35 g (1.23 oz) | 16-18 gr (0.37-0.42 oz) | 300-350 m/s (984-1148 ft/s) | 30-40 meters (98-131 ft) | |
| 16 Gauge | Light Deterrent | 20 g (0.71 oz) | 10-12 gr (0.23-0.27 oz) | 180-230 m/s (591-755 ft/s) | 10-20 meters (33-66 ft) |
| Standard Deterrent | 24 g (0.85 oz) | 12-14 gr (0.27-0.32 oz) | 230-280 m/s (755-919 ft/s) | 20-30 meters (66-98 ft) | |
| Heavy Deterrent | 28 g (0.99 oz) | 14-16 gr (0.32-0.37 oz) | 280-330 m/s (919-1083 ft/s) | 30-40 meters (98-131 ft) | |
| 20 Gauge | Light Deterrent | 18 g (0.63 oz) | 8-10 gr (0.18-0.23 oz) | 170-220 m/s (558-722 ft/s) | 10-20 meters (33-66 ft) |
| Standard Deterrent | 20 g (0.71 oz) | 10-12 gr (0.23-0.27 oz) | 220-270 m/s (722-886 ft/s) | 20-30 meters (66-98 ft) | |
| Heavy Deterrent | 22 g (0.78 oz) | 12-14 gr (0.27-0.32 oz) | 270-320 m/s (886-1050 ft/s) | 30-40 meters (98-131 ft) | |
| 28 Gauge | Light Deterrent | 15 g (0.53 oz) | 6-8 gr (0.14-0.18 oz) | 160-210 m/s (525-689 ft/s) | 10-20 meters (33-66 ft) |
| Standard Deterrent | 18 g (0.63 oz) | 8-10 gr (0.18-0.23 oz) | 210-260 m/s (689-853 ft/s) | 20-30 meters (66-98 ft) | |
| Heavy Deterrent | 20 g (0.71 oz) | 10-12 gr (0.23-0.27 oz) | 260-310 m/s (853-1017 ft/s) | 30-40 meters (98-131 ft) |
Notes on Each Gauge:
- 12 Gauge: Best suited for moderate to heavy deterrent loads due to its higher capacity for both powder and particle loads, making it effective at longer ranges.
- 16 Gauge: A versatile option that offers a good balance between spread and range. Common in European hunting and bird deterrent contexts.
- 20 Gauge: Known for being lighter and easier to handle, making it suitable for closer-range deterrent applications.
- 28 Gauge: Ideal for short-range deterrent due to its lower recoil and capacity, typically for distances under 30 meters.
Important Considerations
- Testing and Customization: Load performance can vary based on powder type, shell type, and even environmental conditions. Testing in a controlled environment is essential.
- Safety First: Always consult a reloading manual and verify with experts, especially when using alternative materials like fine iron particles.
This table serves as a starting point; precise adjustments may be necessary depending on the equipment and specific needs. For more details on load specifications, consult reputable reloading sources or professional guidance.
MicroShield Balanced Impact 50
MicroShield Balanced Impact 50 is crafted to deliver a controlled, safe balance of heat and dispersion for pyrotechnic and training purposes. Designed with 50 mesh-sized iron pellets, it provides non-lethal applications with optimized safety in controlled environments, ideal for training rounds and pyrotechnics. Composed of small, durable steel spheres approximately 0.1 mm in diameter, these pellets feature a low-carbon magnesium alloy, enhancing their durability while reducing the likelihood of unintended ignition. With an apparent density of 4.3 g/cc, this spherical steel powder is approximately 95% individual spheres, with the remaining particles being either spheroid or clusters of multiple spheres. Its uniform, dark gray color ensures easy identification, while its particle size ensures consistent performance for less-lethal use.
Key Features
- 50 mesh iron pellet size for optimal control
- Low carbon magnesium alloy for reduced ignition risk
- Approximately 95% spherical individual particles
- Dark gray color for easy visual identification
- Perfect balance of heat generation and particle dispersion
Product Specifications
| Material | Low carbon magnesium steel alloy |
| Mesh Size | 50 mesh |
| Average Particle Diameter | 0.1 mm |
| Apparent Density | 4.3 g/cc |
| Color | Dark gray |
| Application | Pyrotechnic & non-lethal training rounds |
Perfect for military trainers, pyrotechnic makers, and less-lethal ammunition suppliers.
utilizing iron particles at a 50 mesh size (approx. 0.297 mm). This configuration optimizes particle spread and retention of kinetic energy to create an effective and humane deterrent for birds over varying ranges. The 50 mesh iron particles offer an improved balance between energy retention and dispersion compared to finer powders, resulting in enhanced coverage without compromising safety.
These loads are structured across multiple shotgun gauges to suit diverse operational needs, whether for close-proximity deterrence or extended reach applications. To provide control over the spread and distance, each load type—light, standard, and heavy—uses calibrated powder charges, maintaining a wide dispersal pattern that maximizes effectiveness while minimizing the risk of harm. The table below details recommended specifications across different gauges:
Bird Deterrent Loads Using 50 Mesh Iron Particles Across Various Gauges
| Gauge | Load Type | Iron Particle Load | Powder Charge | Estimated Velocity | Effective Range |
|---|---|---|---|---|---|
| 12 Gauge | Light Deterrent | 20 g (0.71 oz) | 14-16 gr (0.32-0.37 oz) | 230-280 m/s (754-919 ft/s) | 10-20 meters (33-66 ft) |
| Standard Deterrent | 24 g (0.85 oz) | 16-18 gr (0.37-0.42 oz) | 280-330 m/s (919-1083 ft/s) | 20-30 meters (66-98 ft) | |
| Heavy Deterrent | 28 g (0.99 oz) | 18-20 gr (0.42-0.46 oz) | 330-380 m/s (1083-1247 ft/s) | 30-40 meters (98-131 ft) | |
| 16 Gauge | Light Deterrent | 15 g (0.53 oz) | 12-14 gr (0.27-0.32 oz) | 210-260 m/s (689-853 ft/s) | 10-20 meters (33-66 ft) |
| Standard Deterrent | 18 g (0.63 oz) | 14-16 gr (0.32-0.37 oz) | 260-310 m/s (853-1017 ft/s) | 20-30 meters (66-98 ft) | |
| Heavy Deterrent | 22 g (0.78 oz) | 16-18 gr (0.37-0.42 oz) | 300-350 m/s (984-1148 ft/s) | 30-40 meters (98-131 ft) | |
| 20 Gauge | Light Deterrent | 12 g (0.42 oz) | 10-12 gr (0.23-0.27 oz) | 200-250 m/s (656-820 ft/s) | 10-20 meters (33-66 ft) |
| Standard Deterrent | 15 g (0.53 oz) | 12-14 gr (0.27-0.32 oz) | 250-300 m/s (820-984 ft/s) | 20-30 meters (66-98 ft) | |
| Heavy Deterrent | 18 g (0.63 oz) | 14-16 gr (0.32-0.37 oz) | 300-350 m/s (984-1148 ft/s) | 30-40 meters (98-131 ft) | |
| 28 Gauge | Light Deterrent | 10 g (0.35 oz) | 8-10 gr (0.18-0.23 oz) | 190-240 m/s (623-787 ft/s) | 10-20 meters (33-66 ft) |
| Standard Deterrent | 12 g (0.42 oz) | 10-12 gr (0.23-0.27 oz) | 240-290 m/s (787-951 ft/s) | 20-30 meters (66-98 ft) | |
| Heavy Deterrent | 15 g (0.53 oz) | 12-14 gr (0.27-0.32 oz) | 290-340 m/s (951-1115 ft/s) | 30-40 meters (98-131 ft) |
Notes on Each Gauge:
- 12 Gauge: Best suited for moderate to heavy deterrent loads due to its higher capacity for both powder and particle loads, making it effective at longer ranges.
- 16 Gauge: A versatile option that offers a good balance between spread and range. Common in European hunting and bird deterrent contexts.
- 20 Gauge: Known for being lighter and easier to handle, making it suitable for closer-range deterrent applications.
- 28 Gauge: Ideal for short-range deterrent due to its lower recoil and capacity, typically for distances under 30 meters.
Important Considerations
- Testing and Customization: Load performance can vary based on powder type, shell type, and even environmental conditions. Testing in a controlled environment is essential.
- Safety First: Always consult a reloading manual and verify with experts, especially when using alternative materials like fine iron particles.
This table serves as a starting point; precise adjustments may be necessary depending on the equipment and specific needs. For more details on load specifications, consult reputable reloading sources or professional guidance.
Stainless Steel Electrode
Our Stainless Steel Electrodes are made of grade 314 stainless steel alloy, which is highly resistant to corrosion due to the content of nickel and chromium in its composition. These electrodes are suitable for various applications that require corrosion-resistant properties, including marine and chemical industries, and are available in individual packaging for convenience and protection.
Product Specifications
| Material | Stainless Steel Alloy (Grade 314) |
| Corrosion Resistance | Highly resistant due to nickel and chromium content |
| Dimensions | 12 cm x 2 cm x 1 mm (5" x 3/4" x 0.359") |
| Weight | 18 grams |
| Packaging | Individual packaging |
| Applications | Suitable for various applications that require corrosion-resistant properties, including marine and chemical industries |
| SKU | SSFLAT |
Applications and Benefits
- Marine industry applications
- Chemical industry applications
- Any application requiring corrosion-resistant properties
Key Features and Benefits
- Corrosion-resistant stainless steel electrodes
- Made of grade 314 stainless steel alloy
- Highly resistant to corrosion due to nickel and chromium content
- Individual packaging for convenience and protection
Caution:
These electrodes are suitable for use in environments that are prone to corrosion, such as in marine or chemical industries. Please ensure proper safety measures are taken when handling and using these electrodes in such environments.
Small Steel Balls, 1/2 Inch
Polished, hardened steel balls with a diameter of 1/2 inch (about 12 millimeters) for mechanics and magnetism experiments. These balls can be used as a substitute for iron filings for studying the phenomenon of magnetic fields, as they form clusters and chains between unlike poles of magnets. Made of polished, hardened spheres.
Product Specifications
| Diameter | 1/2 inch (about 12 millimeters) |
| Material | Polished, hardened steel |
| Uses | Mechanics and magnetism experiments, substitute for iron filings for studying magnetic fields |
Note:
All dimensions listed are approximate and for general reference only. These products are not manufactured to scientific or precision-grade tolerances. Actual dimensions may vary up to ±5% from stated specifications due to manufacturing processes and environmental conditions. If your application requires exact measurements, please verify dimensions prior to buy.
Applications and Benefits:
- Mechanics and physics enthusiasts
- Science teachers and students
- Magnetism experimenters
- Individuals interested in studying magnetic fields
- People looking for a substitute for iron filings
- Anyone looking for high-quality, polished steel balls
Caution:
These steel balls are small and can pose a choking hazard. Keep out of reach of children and use with caution during experiments. Do not use near magnetic-sensitive electronics without proper shielding.
Steel Balls, 3/4" Diameter
Steel Balls 3/4" Diameter are small steel balls with a diameter of 3/4 inch (about 18 millimeters) that are commonly used in mechanics and magnetism experiments. These balls are a great substitute for iron filings when studying the phenomenon of magnetic fields, as they form clusters and chains between unlike poles of magnets. Made of polished, hardened spheres, these steel balls are durable and long-lasting. If you're looking for an interesting addition to your experiments or just need some high-quality steel balls, Steel Balls 3/4" Diameter are a great choice.
Product Specifications
| Product Name | Steel Balls 3/4" Diameter |
| Material | Steel |
| Diameter | 3/4" (approx. 18mm) |
| Usage | Mechanics and magnetism experiments, magnetic field demonstrations, substitute for iron filings |
Note:
All dimensions listed are approximate and for general reference only. These products are not manufactured to scientific or precision-grade tolerances. Actual dimensions may vary up to ±5% from stated specifications due to manufacturing processes and environmental conditions. If your application requires exact measurements, please verify dimensions prior to buy.
Applications and Benefits:
- Mechanics and engineering students
- Science enthusiasts
- Teachers and educators
- Research laboratories
- DIY enthusiasts
- Magnetism experimenters
Caution:
These steel balls are small, dense, and may pose a choking hazard or cause injury if misused. Keep away from children and use appropriate safety measures during experiments involving impact, magnetism, or motion.
Steel Balls, 1" (25mm)
Steel Balls, 1" (25mm) are solid steel spheres used in various fields such as mechanics, magnetism experiments, pendulum construction, and demonstrations of Newton's laws. These balls are made of high-quality steel, ensuring durability and consistency. Ideal for experiments and demonstrations requiring dense, uniform spheres.
Product Specifications
| Product Name | Steel Balls |
| Size | 1" (25mm) |
| Material | Steel |
| Usage | Mechanics and magnetism experiments, construction of pendulums, demonstration of Newton laws |
| Model | SBALL25 |
Note:
All dimensions listed are approximate and for general reference only. These products are not manufactured to scientific or precision-grade tolerances. Actual dimensions may vary up to ±5% from stated specifications due to manufacturing processes and environmental conditions. If your application requires exact measurements, please verify dimensions prior to buy.
Applications and Benefits:
- Mechanics enthusiasts
- Physics students
- Science teachers
- Engineering students
- Construction workers
- Magnetism experimenters
Caution:
Handle with care. Steel balls are dense and may cause injury or damage if dropped or used improperly. Keep away from children. Use protective equipment when applicable.
Steel Powder, Spherical Mesh 50
This product features low carbon magnesium steel alloy granules. With 95% of the particles shaped as individual spheres, the remaining balance includes spheroids and clusters. The dark gray color and the substantial bulk density of 4.3 g/cc make it ideal for various industrial applications.
Key Features
- Low carbon magnesium steel alloy
- 95% spherical particles
- Apparent bulk density: 4.3 g/cc
- Uniform dark gray color
- Particle diameter: ~0.1 mm
Product Specifications:
| Material | Low carbon magnesium steel alloy |
| Particle Shape | 95% spherical, balance spheroid/clusters |
| Color | Dark Gray |
| Particle Diameter | Approximately 0.1 millimeter |
| Bulk Density | 4.3 g/cc |
Similar Products
- Hardened steel beads, 0.1mm
- Gray spherical metal particles
- Low carbon steel shot, small
- Industrial-grade spheroid pellets
- Magnesium alloy spheres, dense
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for industrial manufacturers, metalworking workshops, automotive part producers, engineering research facilities, and aerospace materials suppliers.
Steel Powder, Iron Powder, Mesh 100
Coarse steel powder, mesh 100, is produced from recycled black steel (construction steel). It demonstrates strong magnetic attraction, high flow rate for dispensing from shakers, and is free from organic impurities such as cutting oils. This versatile iron powder is clean and preferred by educators for use in science experiments. It is also widely used for creating rust effects in sculptures and concrete, as well as a source of iron as a plant nutrient.
Specifications
| Material Source | Recycled black steel (construction steel) |
| Mesh Size | Mesh 100 |
| Magnetic Properties | Strong magnetic attraction |
| Organic Impurities | None |
| Carbon | 0.8% - 1.2% |
| Manganese | 0.35% - 1.2% |
| Silicon | 0.4% Minimum |
| Sulfur | 0.05% Maximum |
| Phosphorus | 0.05% Maximum |
Applications and Benefits:
- Used as iron filing for magnetism and electromagnetism experiments
- Preferred by educators for clean and contamination-free experiments
- Creates rust effects in sculptures, concrete, and structures
- Used as a plant nutrient for iron supplementation
- Strong magnetic properties for science and industrial applications
Caution:
This product is made from recycled steel and may rust over time. Handle with care. Review the Material Safety Data Sheet (MSDS) for proper handling and safety precautions.
Brass Weight Hanger
The Brass Weight Hanger is a stacking-style hanger designed to securely hold weights for various applications. With a stem diameter of 6 mm and a hook diameter of 3 mm, this hanger provides a reliable way to suspend weights during experiments or demonstrations. The stem height of 100 mm and an overall height of 145 mm make it suitable for accommodating a range of weights. The robust construction of the Brass Weight Hanger ensures its durability and longevity. Its stem is designed to comfortably hold at least 600 grams of different weights, making it versatile for a wide range of educational and scientific purposes.
Key Features:
- Stacking-style design
- 6 mm stem diameter, 3 mm hook diameter
- Stem height: 100 mm, Overall height: 145 mm
- Compatible with various slotted weights
- Suitable for weights up to 600 grams
Product Specifications:
| Specification | Value |
| Stem Diameter | 6 mm |
| Hook Diameter | 3 mm |
| Stem Height | 100 mm |
| Overall Height | 145 mm |
| Weight Compatibility | Up to 600 grams |
Similar Products:
- Stacking-style hanger with stem for weights
- Weight hanger with 6 mm stem and 3 mm hook
- Hanger for slotted weights with 100 mm stem
- Brass hanger compatible with various weights
- Sturdy weight hanger for educational use
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for educators, students, researchers, and professionals in educational and scientific fields.
Zinc Electrode, Flat, One Piece
The Zinc Electrode, Flat, One Piece is a high‑purity zinc sheet measuring 5 × ¾ in with a thickness range of 0.75 mm to 1 mm. It is stamped with the letters “Zn”, weighs 16 g, and is supplied as a single flat piece suitable for precise electricity and chemistry experiments as well as industrial die‑casting and alloy production.
Product Specifications
| Material | High‑purity Zinc Metal |
| Purity | High‑purity (≥99.9% Zn) |
| Identification | Stamped with letters “Zn” |
| Shape | Flat sheet |
| Dimensions | 5 × ¾ in (127 mm × 19 mm) |
| Thickness | 0.75 mm up to 1 mm |
| Weight | 16 g |
| Piece Count | One piece |
| Primary Applications | Electricity experiments, Chemistry experiments, Die‑casting, Metal collections, Alloy production (brass, nickel‑silver, commercial bronze) |
Applications and Benefits:
- Conduct controlled electrochemical reactions in laboratory electricity experiments
- Serve as a reactant or electrode in chemistry experiments requiring zinc
- Provide a reliable source material for zinc‑based die‑casting processes in automotive, electrical, and hardware industries
- Contribute zinc content for the production of alloys such as brass, nickel‑silver, and commercial bronze
- Suitable for inclusion in metal collection sets due to identifiable “Zn” stamping
Key Features and Benefits
- High‑purity zinc ensures consistent electrochemical performance
- Flat geometry and precise dimensions facilitate reproducible experimental setups
- Stamped “Zn” marking enables quick identification and inventory control
- Thickness range of 0.75 mm–1 mm balances mechanical strength with ease of handling
- Compact 5 × ¾ in size and 16 g weight allow easy storage and transport
- Malleable at 100 °C–150 °C, expanding usability for elevated‑temperature processes
- Compatible with a variety of industrial applications, including alloy formulation and die‑casting
Caution:
Zinc is brittle at ordinary temperatures but becomes malleable between 100 °C and 150 °C; handle with care, especially when working at elevated temperatures.
- 1