Advanced Search Results
Refine your search by using the category filter.
Spherical Copper Powder - 100 Mesh - 99.5% Cu
High-purity spherical copper powder consisting predominantly of spherical copper particles with a bright reddish-copper appearance. The 100 mesh grade is coarse relative to fine and ultra-fine copper powders. Because the particles are rounded and smooth, the powder flows freely, packs to a high tap density, and behaves consistently during die filling and dosing.
Calibrated microscopy of the current material shows that the mass is carried primarily by coarse spheres near the top of the 100 mesh cut, together with a population of smaller particles that contributes relatively little to the overall mass. This produces the characteristic appearance of larger spheres surrounded by finer particles. Practically all of the material passes through mesh 100 sieve, corresponding to an opening of approximately 150 microns, and the typical mass-median particle size is approximately 120 microns.
The coarse spherical morphology provides a lower specific surface area than fine or ultra-fine copper powder, contributing to improved storage stability and slower development of surface oxidation. Copper powder may exhibit limited electrical continuity when tested as loose powder because individual particles are not necessarily in continuous contact. Conductivity can increase substantially after compaction or when the powder is incorporated into a suitable resin, oil, polymer, or other matrix.
Product Specifications
| Product | Spherical Copper Powder |
| Assay | 99.5% Copper minimum |
| Current Lot Analysis | 99.95% Copper |
| Mesh Grade | 100 Mesh |
| 100 Mesh Sieve Opening | Approximately 150 microns |
| Typical Mass Median (Dv50) | Approximately 120 microns, based on image analysis |
| Particle Morphology | Predominantly spherical to near-spherical |
| Appearance | Reddish-copper metallic powder |
| Chemical Symbol | Cu |
| CAS Number | 7440-50-8 |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
Typical Particle Size Distribution
The values below are typical mass-based results obtained from calibrated optical image analysis of the current material. Percentages are cumulative and represent the share of total mass finer than each listed sieve opening. These values are provided as general guidance for particle-size selection and may vary from lot to lot.
| Sieve | Opening | Typical Cumulative % Passing by Mass |
| 100 Mesh | 150 microns | About 99% |
| 120 Mesh | 125 microns | About 64% |
| 140 Mesh | 106 microns | About 23% |
| 170 Mesh | 90 microns | About 12% |
| 200 Mesh | 75 microns | About 5% |
| 325 Mesh | 45 microns | About 1% |
Typical percentile sizes by mass are approximately Dv10 near 85 microns, Dv50 near 120 microns, and Dv90 near 135 microns. Most of the mass falls between approximately 105 and 150 microns, resulting in a coarse, relatively narrow particle-size distribution immediately below the 100 mesh opening. A finer particle population is present by particle count but contributes relatively little to total mass. These figures are derived from image analysis and are not a certified sieve analysis.
Particle Characteristics
- Predominantly spherical and near-spherical copper particles with smooth metallic surfaces.
- Free-flowing morphology supports even die filling and consistent dosing.
- Good packing characteristics and high tap density associated with spherical morphology.
- High metallic copper content of 99.5% minimum supports electrical and thermal conductivity after compaction or incorporation into a suitable matrix.
- Lower specific surface area than fine or ultrafine copper provides improved storage stability and slower surface oxidation.
- Coarse spherical particles carry most of the material mass, with a finer population present primarily by particle count.
- Material mass is concentrated near the upper end of the 100 mesh cut, with essentially all material passing 100 mesh.
- Bright reddish-copper metallic appearance.
- Suitable for formulations requiring metallic copper with a relatively coarse, controlled particle size.
Applications and Benefits:
- Powder metallurgy and press-and-sinter components.
- Sintered porous parts, including filters and self-lubricating bearings, where spherical morphology can provide controlled, interconnected porosity.
- Metal-filled polymers, resins, and epoxies.
- Thermally conductive compounds and gap fillers.
- Bulk metallic filler in compounded conductive pastes, adhesives, and sealants. This is a coarse-particle filler rather than a fine-line printing ink powder.
- Cold casting and metal-filled resin castings that can be sanded and polished to produce a metallic copper surface.
- Decorative metallic epoxy, resin, and coating finishes requiring a visible copper effect.
- Metal-bonded matrix and friction formulations using copper as a matrix metal.
- Copper-based brazing and joining formulations.
- Copper metal reagent for laboratory and research chemistry.
- Educational demonstrations involving metallic powders.
- High-density and specialty industrial filler applications.
Caution:
Fine metal powders should be handled carefully to minimize airborne dust. Avoid inhalation, unnecessary dust generation, and contact with incompatible materials or ignition sources. Refer to the current SDS for complete handling, storage, personal protection, and disposal information.
Miconazole Nitrate Micronized USP-43
Miconazole Nitrate Micronized USP-43 is a pharmaceutical-grade antifungal active ingredient (API) belonging to the imidazole class of antifungal compounds. It is commonly used in topical and mucosal antifungal formulations for pharmaceutical manufacturing, compounding, formulation development, and laboratory applications.
This material conforms to USP-43 specifications and is micronized to provide improved dispersion, enhanced uniformity, and smoother incorporation into topical and semi-solid formulations.
Miconazole Nitrate exhibits broad-spectrum antifungal activity against dermatophytes and yeasts through inhibition of ergosterol biosynthesis, an essential component of fungal cell membranes.
Key Applications
Pharmaceutical Formulations
- Topical antifungal creams and lotions
- Athlete’s foot (tinea pedis) formulations
- Ringworm (tinea corporis) products
- Jock itch (tinea cruris) products
- Vaginal antifungal creams and suppositories
- Antifungal sprays, powders, and gels
Compounding Pharmacy Use
- Custom antifungal creams and gels
- Combination dermatological formulations
Personal Care & Cosmeceutical Applications
- Medicated skincare products
- Antimicrobial topical formulations
Veterinary Applications
- Antifungal formulations for veterinary use
Research & Development
- Antifungal formulation development
- Pharmaceutical and academic research
Technical Information
Miconazole Nitrate inhibits the biosynthesis of ergosterol, an essential component of fungal cell membranes. This disruption compromises membrane integrity and contributes to antifungal activity in topical pharmaceutical systems.
Key Features:
- USP-43 pharmaceutical grade
- Micronized particle size for improved dispersion
- Consistent batch-to-batch quality
- Suitable for multiple topical dosage forms
- Broad-spectrum antifungal activity
This product is ideal for:
- Pharmaceutical manufacturers
- Contract manufacturing organizations (CMOs/CDMOs)
- Compounding pharmacies
- Cosmetic and personal care manufacturers
- Veterinary product manufacturers
- Universities and research laboratories
- Chemical distributors and resellers
Product Specifications
| Product Name | Miconazole Nitrate Micronized USP-43 |
| CAS Number | 22832-87-7 |
| EC Number | 245-256-6 |
| Grade | USP-43 |
| Chemical Class | Imidazole antifungal |
| Appearance | White to off-white crystalline powder |
| Assay | 98.0% – 102.0% (USP specification) |
| Typical Assay | 99.85% |
| Solubility | Slightly soluble in water; soluble in organic solvents such as ethanol, propylene glycol, PEG systems, and DMSO |
| Molecular Formula | C₁₈H₁₄Cl₄N₂O·HNO₃ |
| Molecular Weight | 479.14 g/mol |
| Particle Size | D90 = 10 µm |
| Melting Point | Approximately 178–182°C |
Quality & Compliance
- Manufactured in accordance with USP-43 specifications
- Packaged for pharmaceutical, compounding, and research applications
- Consistent batch-to-batch quality
Available Documentation:
Certificate of Analysis (CoA)
Safety Data Sheet (SDS)
Technical Data Sheet (TDS)
Packaging Options
Original material is manufactured in China and supplied in 25 kg fiber drums. Smaller repackaged quantities are available to support research, development, pilot-scale work, and formulation testing.
1oz – $49
1lb – $295
55lb (25 kg Drum) – $4495
Custom packaging and private labeling may be available upon request for research and industrial applications.
Formulation Considerations
Miconazole Nitrate is commonly incorporated into:
- Oil-in-water creams
- Gels and lotions
- Vaginal formulations
- Powder sprays and topical systems
Key formulation notes:
- Often pre-dispersed in propylene glycol or PEG systems
- Compatible with common emulsifiers and thickening agents
- Micronized particle size may improve formulation uniformity and dispersion
Why Buy From Chemical Store?
- Reliable supply of pharmaceutical-grade materials
- Flexible packaging for research and development applications
- Technical understanding of formulation applications
- Responsive support for documentation and compliance needs
- Ideal for both established manufacturers and small-scale developers
Related Products
To support antifungal formulation development, consider:
- Carbomers (gel base thickening agents)
- Emulsifiers (cream formulations)
- Propylene glycol (solvent and penetration enhancer)
- Preservatives and stabilizers
Storage & Handling
- Store in a cool, dry, well-ventilated area
- Protect from moisture and direct sunlight
- Keep container tightly closed
- Use appropriate PPE and avoid inhalation of dust
Refer to the SDS for complete safety and handling information.
Shipping Notice
Small quantities are typically shipped as non-regulated material for domestic ground transportation. Bulk quantities may require additional shipping review depending on destination, carrier requirements, and applicable regulations.
Regulatory & Usage Notice
This product is intended for:
- Pharmaceutical manufacturing
- Compounding applications
- Research and laboratory use
- Industrial formulation development
Not intended for direct consumer use or direct human consumption.
Buyers are responsible for ensuring compliance with all applicable local, state, federal, and international regulations regarding use, handling, formulation, labeling, and distribution.
Disclaimer
The information provided is believed to be accurate and reliable based on available supplier and internal documentation. Users are responsible for determining the suitability of this material for their specific application and for compliance with all applicable regulations.
PQASP - Cationic Hair Conditioning Base
PQASP is a cationic hair conditioning base intended for professional cosmetic and personal-care formulators.
According to the manufacturer's description, PQASP is a balanced, ready-to-use concentrate for producing high-quality cream rinses and hair conditioners at formulation levels as low as 3%.
The manufacturer describes PQASP as compatible with proteins, herbal extracts, esters, and other specialty ingredients. It is also described as a conditioning and softening agent for hair-care preparations, with mildness to the eyes, skin, and scalp. These performance and mildness claims have not been independently verified by Chemical Store.
Composition and Ingredients
PQASP is a formulated mixture containing the following ingredients:
| Ingredient | CAS Number | Concentration |
|---|---|---|
| Cetearyl Alcohol (Cetostearyl Alcohol) | 67762-27-0 | 63% |
| Stearalkonium Chloride (Stearyldimethylbenzylammonium Chloride) | 122-19-0 | 10-20% |
| PEG-40 Castor Oil (Ethoxylated Castor Oil) | 61791-12-6 | 10-20% |
Composition Note: The supporting Safety Data Sheet identifies Stearalkonium Chloride at 15%. The concentration ranges shown above reflect the available ingredient information and should not be interpreted as exact lot-specific analytical results.
Product Information
| Product Name: | PQASP Cationic Hair Conditioning Base |
| Product Codes: | STAD1002, PQASP |
| CAS Number: | Mixture |
| Grade: | Cosmetic / Personal-Care Formulation Raw Material |
| Appearance: | Off-white to pale yellow waxy flakes / solid |
| Product Type: | Cationic Conditioning Base |
| Primary Function: | Hair Conditioning and Softening Agent |
Applications and Recommended Uses
PQASP is intended for professional formulation and development of cosmetic and personal-care products, including:
- Hair conditioners and cream rinses
- Hair detangling formulations
- Antistatic hair-care products
- Conditioning emulsions
- Hair softening formulations
- Cosmetic and personal-care formulation development
- Laboratory research and product evaluation
Formulation Information
According to the manufacturer, PQASP may be incorporated into hair-conditioning formulations at concentrations as low as 3%. Actual usage levels should be determined through formulation development, compatibility testing, and finished-product performance evaluation.
Compatibility with individual ingredients, preservatives, fragrances, and other formulation components should be evaluated before commercial production.
Professional Use and Regulatory Information
This product is intended for professional formulators, manufacturers, laboratories, researchers, and other knowledgeable users familiar with the handling and application of cosmetic raw materials.
PQASP is supplied as a formulation ingredient and not as a finished consumer cosmetic product. Customers are responsible for evaluating its suitability for their intended applications and ensuring that finished formulations comply with applicable regulatory requirements.
Safety and Handling Information
Review the current Safety Data Sheet (SDS), available product specifications, and lot-specific Certificate of Analysis (COA), where available, before handling or using this material.
Purchasers are responsible for appropriate handling, storage, use, disposal, formulation testing, and regulatory compliance.
Important Notice: By purchasing this product, the buyer acknowledges responsibility for determining its suitability for the intended application and for implementing appropriate safety measures.
English 