Español Advanced Search Results
Refine your search by using the category filter.
High-purity, high-density spherical copper powder for enhanced conductivity and versatility.
Fast chemical reactions, hydrogen gas production, wood stains, iron-based chemicals.
Copper Granules, Mesh 20 (Coarse Copper Powder)
Coarse copper powder made of solid metallic high-purity copper metal. Particles are nearly equal in size, appearing as metallic spherical crystals. Recommended for wood inlay, art, and industrial applications requiring solid round multi-side balls. Granular copper is also used in laboratories for sulfur removal from environmental samples.
Product Specifications
| Copper | 99.84% |
| Apparent Density | 5.29 g/cc |
| Sieve Analysis (Typical) | +20 mesh: 0% -20/+30 mesh: 100% -30/+40 mesh: 0.0% -40 mesh: 0.0% |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Wood inlay projects
- Artistic applications
- Industrial uses requiring solid multi-side balls
- Sulfur removal from environmental samples in laboratories
Caution:
Handle with appropriate safety measures. Refer to the SDS for detailed safety guidelines.
Copper Powder 99+%, Mesh 200
High-purity copper powder made via water atomization and hydrogen reduction. Features very fine, irregular particles and clusters with relatively lower density. Recommended for applications requiring high purity and conductivity, including diamond wheels, sintering, and chemical reactions. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will conduct when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.3% |
| Hydrogen Loss | 0.39% |
| Apparent Density | 2.6 - 2.8 g/cc |
| Mesh Size | 200 mesh |
| Sieve Analysis |
+100 Mesh: Trace +140 Mesh: 1% Max +200 Mesh: 3% Max +325 Mesh: Balance -325 Mesh: 90% Min |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Conductive inks, paints, and pastes
- Injection molding
- Thermal management
- EDM electrodes
- Antifouling paints
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
- Diamond wheels
- Chemical reactions
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder 99.3%, General Purpose, 150 Mesh
The most popular and widely used copper powder, produced by the water atomization method followed by hydrogen reduction. This general-purpose copper powder has diverse applications, including the production of copper compounds, use as a catalyst in chemical formulations, abrasive wheels, carbon brushes, and more. It is important to note that pure copper powders may not exhibit continuity or conductivity under low-voltage multimeter tests due to air gaps and weak particle contacts but will show conductivity under higher voltage, when compacted, or mixed with oils/resins to form a paste.
Product Specifications
| Purity | 99.3% |
| Apparent Density | 2.7 g/cc |
| Nominal Mesh | -140 |
| -325 Mesh Ratio | > 50% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Production of copper compounds
- Catalyst in chemical formulations
- Abrasive wheels
- Carbon brushes
- Electronics and electrical applications
- Decorative and protective coatings
- Brazing and general-purpose industrial use
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder 99.3%, Mesh 325
Ultra-fine, high-purity copper powder made via water atomization and hydrogen reduction. Features spheroidal particles and clusters, offering higher conductivity and lower density. Suitable for metal injection molding and applications requiring high conductivity and purity. Typical applications include conductive inks, paints, pastes, thermal sprays, and sintered products. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will show conductivity when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.31% |
| Hydrogen Loss | 0.39% |
| Apparent Density | 2.97 g/cc |
| Mesh Size | 325 mesh |
| Sieve Analysis |
+60 Mesh: 0% -60/+80 Mesh: 0% -80/+100 Mesh: 0% -100/+140 Mesh: Trace -140/+200 Mesh: Trace -200/+325 Mesh: 0.6% -325 Mesh: 99.4% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Conductive inks, paints, and pastes
- Injection molding
- Thermal management
- EDM electrodes
- Antifouling paints
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder 99.5% - 99.9%
Ultra-fine, very high purity copper powder made via air atomization and hydrogen reduction. Features spherical particles with high conductivity and density. Recommended for diverse applications, including thick and thin film pastes, capacitor chips, end cap terminators, and thermal sprays. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will show conductivity when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.81% |
| Iron | 0.01% |
| Hydrogen Loss | 0.18% |
| Apparent Density | 4.89 g/cc |
| Sieve Analysis | +200 Mesh: 0% -200/+325 Mesh: 4.8% -325 Mesh: 95.2% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Capacitor chips
- End cap terminators
- Conductive inks, paints, and pastes
- Injection molding
- Electronics
- Thermal management
- EDM electrodes
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder 99.8%, Electronic Grade, Mesh 325
Electronic grade, high-purity copper powder made via water atomization and hydrogen reduction. Features ultra-fine, spheroidal particles with high conductivity and low density. Recommended for a variety of applications where conductivity is crucial, including thick and thin film pastes, capacitor chips, and thermal sprays. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will conduct when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.85% |
| Hydrogen Loss | 0.19% |
| Apparent Density | 2.97 g/cc |
| Mesh Size | 325 mesh |
| Sieve Analysis | +60 Mesh: 0% -60/+80 Mesh: 0% -80/+100 Mesh: 0% -100/+140 Mesh: Trace -140/+200 Mesh: Trace -200/+325 Mesh: 0.6% -325 Mesh: 99.4% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Capacitor chips
- End cap terminators
- Conductive inks, paints, and pastes
- Injection molding
- Electronics
- Thermal management
- EDM electrodes
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder > 99% (150 - 325 Mesh)
General-purpose, highly pure (>99%) copper powder made from electrolytic copper. Granular copper with a mesh size of 150 - 325. Known for its excellent electrical and thermal conductivities, this product finds use in the electrical and electronic industries. Additional applications include self-lubricating bearings, brazing, cold soldering, and mechanical plating. It is also used for antifouling paints, decorative and protective coatings, printing inks, medals, medallions, metal-plastic decorative products, and various chemical and medical purposes.
Product Specifications
| Purity | >99% |
| Mesh Size | 150 - 325 |
| Screen Analysis |
+60: 0.0% -60/+100: 0.7% -100/+200: 89.7% -200/+325: 9.1% -325: 0.5% |
Applications and Benefits:
- Electrical and electronic applications
- Self-lubricating bearings
- Brazing and cold soldering
- Mechanical plating
- Antifouling paints and decorative coatings
- Printing inks
- Medals, medallions, and metal-plastic decorative products
- Chemical and medical purposes
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
For MSDS Go to Downloads TabCU118SP Copper Powder, Fine, Spherical
Our specification guarantees that at least 80% of this powder are particles smaller than 44 micron. A typical analysis however shows that 88% of particles are smaller than 44 micron. Most particles are between 16 micron and 28 micron.
Applications include cold casting, 3-D printer filaments, metal clay, sintering, Green/ blue patina and rust effect, preventing mold in concrete, plaster,dry-wall, paint, adhesives and grout.
Also used in 3D printing process known as Selective Powder Deposition (SPD)
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features:
- High-purity, high-density spherical copper powder
- Provides high heat conductivity and electrical conductivity
- Suitable for various applications, including cold casting, 3-D printer filaments, metal clay, sintering, green/blue patina and rust effect, preventing mold in concrete, plaster, dry-wall, paint, adhesives, and grout
- Used in the 3D printing process known as Selective Powder Deposition (SPD)
- Particle size distribution with 88% of particles smaller than 44 micron
Product Specifications:
| Copper Purity | Over 99.5% |
| Hydrogen Loss | Less than 0.7% |
| Apparent Density | 4.5-5.5 g/cc |
| Typical Analysis | Copper > 99.5% Hydrogen Loss < 0.7% Apparent Density, g/cc: 4.5 - 5.5 Passing mesh 325 (44 micron): 80% ~ 88% |
Similar Products:
- Ultra-Fine Copper Powder
- High-Purity Copper Foil
- Copper Wire
- Copper Rod
- Copper Sheet
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for enhanced conductivity and versatility applications, including cold casting, 3-D printing, metal clay, and more.
For MSDS ClickCU7005F Copper Powder
Copper Powder offers exceptional metallic shine, ideal for metallic inks and paints. Compatible with most resins and conductive for ink creation.
For more details, visit the CU7005F product data sheet.
Key Features
- Exceptional metallic shine
- Art-grade pigment quality
- Compatible with various resins
- Usable with drying oils like linseed
- Enables creation of conductive inks
Product Specifications
| Type | Copper Powder |
| Use | Metallic Inks, Paints |
| Compatibility | Polyurethane, Polyacrylic, Polyester |
| Conductivity | Suitable for Conductive Inks |
| Pigment Quality | Art Grade |
Similar Products
- Metallic-shine gold powder for inks
- Silver pigment powder, art-grade
- Bronze powder, resin-compatible
- Reflective aluminum powder, versatile
- Artistic brass powder for painting
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Artists, Paint Manufacturers, and DIY Craft Enthusiasts
Copper Powder CU112SP
CU112SP is a super fine, high density, high purity spherical copper powder that provides high heat conductivity and electrical conductivity properties to your products.
Our specification guarantees that at least 95% of this powder are particles smaller than 44 micron. A typical analysis however shows that 99.9% of particles are smaller than 44 micron. Most particles are between 10 micron and 22 micron.
HTS Code: 7406.10.0000.
NMFC: 30743
CAS: 7440-50-8
Applications include cold casting, 3-D printer filaments, metal clay, sintering, Green/ blue patina and rust effect, preventing mold in concrete, plaster,dry-wall, paint, adhesives and grout.
Also used in 3D printing process known as Selective Powder Deposition (SPD)
Old product code: CU155A
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features
- Super fine, spherical particles
- High density and purity
- Excellent thermal and electrical conductivity
- Consistent particle size distribution
- Versatile applications in industry and art
Product Specifications
| Particle Size | 95% < 44 microns |
| Purity | > 99.2% Copper |
| Apparent Density | 4.5 - 5.5 g/cc |
| Hydrogen Loss | < 0.7% |
| Mesh Passing | 99.9% through 325 (44 micron) |
Similar Products
- Fine silver powder, high conductivity
- Spherical bronze powder, 3D printing
- Fine aluminum powder, thermal conductivity
- High-purity zinc powder, corrosion resistance
- Spherical titanium powder, lightweight strength
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for 3D Printing Enthusiasts, Industrial Manufacturers, Electronics Professionals, Artists and Sculptors, Construction Material Suppliers
For MSDS Click or Go to Downloads TabHighly pure (>99%) electrolytic copper in a granular form, Copper Filings are versatile for various industrial, chemical, and artistic applications. Mesh 25 - 325 suitable for electrical and thermal conductivities.
Key Features
- Highly pure electrolytic copper
- Excellent electrical and thermal conductivities
- Versatile mesh size from 25 - 325
- Useful in a wide range of applications
- Effective for coatings, brazing, and soldering
Product Specifications
| Material | Copper >99% Purity |
| Mesh Size | 25 - 325 |
| Form | Granular Mixed Grain |
| Applications | Electrical, Mechanical, Decorative |
Similar Products
- High conductivity copper mesh
- Electrical grade copper pellets
- Thermal conductive copper strips
- Fine copper powder for coating
- Brazing grade copper granules
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Electrical Engineers, Industrial Manufacturers, Artists and Craftsmen, Chemical Technicians, Medical Equipment Manufacturers
Copper Tube 24" Long, Od: 1/8" (3.1 Mm) Copper
These versatile copper tubes are perfect for industrial applications requiring high conductivity and resistance to corrosion. They are commonly used in induction heaters and for hot liquid transfer. The tube is 24" long with an outer diameter of 1/8" (3.1 mm), making it a convenient size for a variety of projects.
Key Features:
- High purity copper powder
- Largest grains in comparison to our other copper powder products
- Darker in color than our other copper powder products
Product Specifications:
| Purity | 99.87% |
| Hydrogen Loss | 0.21% |
| Apparent Density | 2.57g/cc |
| Sieve Analysis | Typical |
| 40 Mesh | 0% |
| -40/100 Mesh | 90.4% |
| -100/140 Mesh | 9% |
| -140 Mesh | 0.6% |
Similar Products
- Copper Tube 12" Long, Od: 1/4" (6.35 Mm)
- Copper Tube 36" Long, Od: 1/2" (12.7 Mm)
- Copper Coil 50' Long, Od: 3/8" (9.53 Mm)
- Copper Sheet 24" x 36", Thickness: 0.032" (0.81 Mm)
- Copper Wire 100' Long, Gauge: 14
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: Please refer to the Safety Data Sheet for Copper Powder before use.
Perfect for:
- Industrial applications
- Manufacturing processes
- Research and development
The target audience for this product is individuals or companies involved in industrial applications, manufacturing processes, and research and development. They are likely to have a technical background and require high purity copper powder for their work. The language and tone of the description should be informative and technical, providing detailed information about the product specifications and key features. It should also highlight the product's versatility and potential applications in various industries.
Copper Tube 36" Long, Od: 3/16" (4.8 Mm)
Copper Tube 36" Long, Od: 3/16" (4.8 Mm) is a versatile copper tube that can be used in a variety of heating applications. These tubes are perfect for making induction heaters, Buzz-wire game projects, water heaters, and for the transfer of hot gases or liquids.
Available in 3 different lengths and thicknesses, copper tubes are a reliable and durable option for any heating project.
Key Features:
- 36" long copper tube
- Outer diameter of 3/16" (4.8 mm)
- Versatile for various heating applications
- Suitable for use in induction heaters, Buzz-wire game project, water heaters, and transfer of hot gases or liquids
- Available in 3 different lengths and thicknesses
- High-quality copper material ensures durability and longevity
Product Specifications:
| Product Name: | Copper Tube 36" Long, Od: 3/16" (4.8 Mm) |
| Length: | 36 inches |
| Outer Diameter: | 3/16" (4.8 mm) |
| Material: | Copper |
| Common Uses: | Induction heaters, Buzz-wire game project, water heaters, transfer of hot gases or liquids |
Similar Products
- Brass Tube 36" Long, OD: 1/4" (6.35 mm) - Ideal for plumbing and decorative purposes.
- Aluminum Tube 36" Long, OD: 1/2" (12.7 mm) - Lightweight and corrosion-resistant, perfect for HVAC systems.
- Stainless Steel Tube 36" Long, OD: 3/8" (9.53 mm) - Durable and heat-resistant, suitable for high-pressure and high-temperature applications.
- PVC Tube 36" Long, OD: 1" (25.4 mm) - Non-corrosive and easy to install, great for water and drainage systems.
- Titanium Tube 36" Long, OD: 1/8" (3.17 mm) - Strong and lightweight, ideal for aerospace and marine applications.
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: Copper tubes may conduct electricity and should not be used in electrical applications. Use appropriate safety measures when handling hot gases or liquids.
Perfect for:
- DIY enthusiasts who want to create their own induction heaters or Buzz-wire game projects
- Plumbers and HVAC technicians who need copper tubes for water heaters and transfer of hot gases or liquids
- Manufacturers who require copper tubes for their heating applications
- Students and educators who want to teach or learn about the properties and uses of copper tubes
- Homeowners who want to upgrade their heating systems with high-quality copper tubes
- Construction professionals who need copper tubes for their building projects
Copper Tube 48" Long, O.D.: 1/4" (6.2 Mm)
Upgrade your projects with copper tubes for hot liquid transfer. These reliable copper tubes can be used in various applications such as induction heaters, Buzz-wire game projects, water heaters, and transfer of hot gases or liquids. The copper tube is 48 inches long and has an outer diameter of 1/4 inch (6.2 mm).
Key Features
- Reliable copper tubes
- Suitable for hot liquid transfer
- Can be used in various applications
Product Specifications:
| Length | 48 inches |
| Outer Diameter | 1/4 inch (6.2 mm) |
Similar Products
- Copper Tube 36" Long, O.D.: 1/4" (6.2 Mm)
- Copper Tube 60" Long, O.D.: 1/4" (6.2 Mm)
- Copper Tube 48" Long, O.D.: 3/8" (9.5 Mm)
- Copper Tube 48" Long, O.D.: 1/2" (12.7 Mm)
- Copper Tube 48" Long, O.D.: 5/8" (15.9 Mm)
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for: DIY enthusiasts and professionals looking for reliable copper tubes for hot liquid transfer.
CAUTION: Handle with care when using copper tubes for hot liquid transfer to avoid burns or scalds.
For MSDS Go to Downloads TabSafety Data Sheet for Copper Powder
CU41, Copper Powder, Mesh 40 (Coarse)
High purity atomized copper powder -40/ 100 US Mesh has the largest grains compared with our other copper powder products. It is also usually darker in color. Minimum purity: 99.0%. Typical Apparent Density: 2.4. Nominal Mesh: -40/ 100. HTS Code: 7406.10.0000. NMFC: 30743. CAS: 7440-50-8. Typical Analysis: Copper: 99.87%, Hydrogen Loss: 0.21%, Apparent Density: 2.57 g/cc. Sieve Analysis: 40 mesh 0%, -40/ 100 mesh 90.4%, -100/ 140 mesh 9%, -140 mesh 0.6%.
Key Features
- High purity, minimum 99.0%
- Coarse grain size, -40/ 100 US Mesh
- Dark color, distinct appearance
- Apparent Density: 2.57 g/cc
- Comprehensive sieve analysis included
Product Specifications
| Purity | 99.87% |
| Hydrogen Loss | 0.21% |
| Apparent Density | 2.57 g/cc |
| Mesh Size | >40 mesh 0% -40/ 100 mesh 90.4% -100/ 140 mesh 9% -140 mesh 0.6% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS Number | 7440-50-8 |
Similar Products
- Fine grain, 99% pure copper powder
- Medium grain, dark copper powder
- High-density, fine copper powder
- Coarse, 98% pure copper flakes
- Atomized, spherical copper granules
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for Industrial Manufacturers, Metal Fabrication Professionals, Chemical Industry Experts, Research and Development Teams, Specialty Alloy Producers
Fine Iron Filings By Weight Filings, Bulk
Looking for a high-quality iron filing product that is perfect for experimentation with magnetic fields? Look no further than Fine Iron Filings Bulk! This product comes in a convenient shaker with a screw cap for safe-keeping and allows you to easily visualize 3D magnetic fields. It's ideal for classroom demonstrations and home studies, making it perfect for students, educators, hobbyists, and anyone interested in exploring the fascinating properties of magnets.
Key Features:
- Ideal for experimentation with magnetic fields
- Allows you to visualize 3D magnetic fields
- Perfect for classroom demonstrations and home studies
Key Features:
- Ideal for experimentation with magnetic fields
- Allows you to visualize 3D magnetic fields
- Perfect for classroom demonstrations and home studies
High-quality iron filing product that comes in a convenient shaker with a screw cap for safe-keeping. These filings are perfect for experimentation with magnetic fields, allowing you to visualize 3D magnetic fields with ease. Is perfect for students, educators, hobbyists, and anyone interested in exploring the fascinating properties of magnets. With its easy-to-use shaker and screw cap, you can experiment with magnetic fields at home or in the classroom.
Product Specifications:
| Product Name | Fine Iron Filings |
| Type | Bulk Filings |
| Packaging | Convenient shaker with screw cap |
| Ideal For | Experimentation with magnetic fields, visualizing 3D magnetic fields, classroom demonstrations, home studies |
| Suitable For | Students, educators, hobbyists, anyone interested in exploring the properties of magnets |
Similar Products
- Coarse Iron Filings By Weight Filings, Bulk Coarse Iron Filings Bulk
- Iron Powder for Magnetic Slime Making
- Magnetic Levitation Kit with Iron Filings
- Iron Filings in Oil Suspension for Magnetic Field Demonstrations
- Magnetic Field Viewer Film for Visualizing Magnetic Fields
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: Fine Iron Filings may pose a hazard if ingested or inhaled. Keep out of reach of children and avoid contact with eyes. Use in a well-ventilated area and wear protective gear if necessary. Follow all safety guidelines and precautions when experimenting with magnetic fields.
Perfect for:
- Students
- Educators
- Hobbyists
- Science enthusiasts
Visualize 3D Magnetic Fields
Looking for an easy and convenient way to experiment with magnetic fields? Look no further than Fine Iron Filings! Our high-quality iron filing product comes in a handy shaker with a screw cap for safe-keeping. With Fine Iron Filings, you can easily visualize 3D magnetic fields and explore the fascinating properties of magnets.
Key Features:
- Ideal for experimentation with magnetic fields
- Allows you to visualize 3D magnetic fields
- Perfect for classroom demonstrations and home studies
Whether you're a student, educator, hobbyist, or just someone interested in science, Fine Iron Filings is the perfect product for you. With its easy-to-use shaker and screw cap, you can experiment with magnetic fields at home or in the classroom.
Fine Iron Powder Acid Soluble
Fine Iron Powder is a high-quality, acid-soluble powder ideal for facilitating quick chemical reactions. Its versatility makes it an excellent choice for various applications, including the production of hydrogen gas, wood stains, Iron Sulfate (Ferrous Sulfate), and other iron-based chemicals. The powder exhibits exceptional solubility in diluted sulfuric acid, diluted hydrochloric acid, and diluted acetic acid (Vinegar), ensuring efficient reactions and desired outcomes.
Key Features:
- Facilitates quick chemical reactions
- Enables hydrogen gas production
- Ideal for wood stains
- Suitable for iron-based chemical production
- Highly soluble in diluted acids
Product Specifications:
| Specification | Details |
| Particle Size | Fine |
| Solubility | Acid Soluble |
| Applications | Chemical Reactions, Hydrogen Gas Production, Wood Stains, Iron-Based Chemicals |
Similar Products:
- Iron Filings for Chemical Reactions
- Iron Powder for Metallurgical Applications
- Fine Metal Powders for Industrial Use
- Iron Sulfate for Water Treatment
- Iron-Based Catalysts for Chemical Synthesis
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: If cautions, hazards, or warnings don't exist, this section will be hidden.
Perfect for chemists, chemical manufacturers, industrial researchers, and professionals seeking effective iron-based solutions.
High Purity Iron Powder for Seed Cleaning (300SC)
300SC is a fine, high-purity iron powder with spheroidal and irregular easy-flow particles, specifically designed for industrial seed cleaning applications. Qualified and tested for optimal performance in seed cleaning processes.
Product Specifications
| Iron Content | 99+% |
| Carbon | 0.00% |
| Oxygen | 0.05% |
| Sulfur | 0.006% |
| Phosphorus | 0.001% |
| Particle Size Distribution |
+200 Mesh (75 microns): Trace -200 +325 Mesh (45 microns): 3% -325 Mesh: Balance |
Applications and Benefits:
- Industrial seed cleaning applications
- Spheroidal particles for easy flow and efficiency
- High-purity material ensures effective performance
Additional Information:
Qualified for industrial seed cleaning use only. For further details, download the Safety Data Sheet.
Iron Powder, High Purity, Hydrogen Reduced
High-purity, hydrogen-reduced, highly reactive, fine iron powder with a high surface area. Suitable for chemical reactions, magnetism experiments, and making magnetic paints. All particles are 150 microns or smaller.
Product Specifications
| Iron Content | >98% |
| Acid Insolubility | 0.0031 |
| H2-Loss | 0.009 |
| Apparent Density (HALL) | 2.41 G/CC |
| Particle Size Distribution | +80 Mesh: Trace -80/+100 Mesh: 0.8% -100/+140 Mesh: 14.6% -140/+200 Mesh: 25.8% -200/+325 Mesh: 30.3% -325 Mesh: 28.5% |
| HTS Number | 7205.21.0000 |
| CAS Number | 7439-89-6 |
Applications and Benefits:
- Chemical reactions
- Magnetism experiments
- Making magnetic paints
Additional Information:
For further details, visit the following resources:
Iron Powder, Coarse, Mesh 20
IRON12 is a special coarse iron powder with a spongy flake structure, produced from high-purity iron ore by hydrogen reduction. It is ideal for ground remediation, permeable reactive barriers, and filtration of specific air or gas contaminants. Additionally, it serves as a high-purity iron source for chemical reactions. Apparent density ranges from 1 to 1.5 g/cc.
Product Specifications
| Particle Size | Mesh 20 |
| Apparent Density | 1 - 1.5 g/cc |
| Screen Analysis | +20 Mesh: Trace - 2.0% -20 +60 Mesh: 30.0% - 70.0% -60 +100 Mesh: 10.0% - 35.0% -325 Mesh: Up to 12% |
Applications and Benefits:
- Ground remediation
- Permeable reactive barriers
- Filtration of air or gas contaminants
- Source of high-purity iron for chemical reactions