Advanced Search Results
Refine your search by using the category filter.
Copper Powder 99.3%, Mesh 325
Ultra-fine, high-purity copper powder made via water atomization and hydrogen reduction. Features spheroidal particles and clusters, offering higher conductivity and lower density. Suitable for metal injection molding and applications requiring high conductivity and purity. Typical applications include conductive inks, paints, pastes, thermal sprays, and sintered products. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will show conductivity when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.31% |
| Hydrogen Loss | 0.39% |
| Apparent Density | 2.97 g/cc |
| Mesh Size | 325 mesh |
| Sieve Analysis |
+60 Mesh: 0% -60/+80 Mesh: 0% -80/+100 Mesh: 0% -100/+140 Mesh: Trace -140/+200 Mesh: Trace -200/+325 Mesh: 0.6% -325 Mesh: 99.4% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Conductive inks, paints, and pastes
- Injection molding
- Thermal management
- EDM electrodes
- Antifouling paints
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder 99.8%, Electronic Grade, Mesh 325
Electronic grade, high-purity copper powder made via water atomization and hydrogen reduction. Features ultra-fine, spheroidal particles with high conductivity and low density. Recommended for a variety of applications where conductivity is crucial, including thick and thin film pastes, capacitor chips, and thermal sprays. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will conduct when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.85% |
| Hydrogen Loss | 0.19% |
| Apparent Density | 2.97 g/cc |
| Mesh Size | 325 mesh |
| Sieve Analysis | +60 Mesh: 0% -60/+80 Mesh: 0% -80/+100 Mesh: 0% -100/+140 Mesh: Trace -140/+200 Mesh: Trace -200/+325 Mesh: 0.6% -325 Mesh: 99.4% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Capacitor chips
- End cap terminators
- Conductive inks, paints, and pastes
- Injection molding
- Electronics
- Thermal management
- EDM electrodes
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Jumper Wires Test Lead Set With Alligator Clips
Introducing our Jumper Wires Test Lead Set with Alligator Clips, a versatile and essential tool for any electronics enthusiast. This set includes 10 color-coded deluxe jumper test leads with 46-mm alligator clips, featuring 2 wires each in white, yellow, red, black, and green. Each wire measures 25cm in length and has an OD of 2mm with 10x0.1mm CCS wires.
What sets our Deluxe Jumper Test Leads apart is their larger alligator clips and high-grip PVC covering, making them easy to operate and handle. Whether you're a hobbyist or a professional, this set is a must-have for your electronics toolkit.
Key Features:
- Set of 10 jumper wires with alligator clips
- 5 different colors for easy identification
- 2mm OD and 10x0.1mm CCS wires with length of 25cm
- Deluxe version with larger alligator clips and high grip PVC covering
- Perfect for testing and prototyping electrical circuits
Product Specifications:
| Product Name | Jumper Wires, Test Lead Set With Alligator Clips, Set Of 10 Wires, 5 Colors |
| Included Wires | 2 White, 2 Yellow, 2 Red, 2 Black, 2 Green |
| Wire OD | 2mm |
| Wire Type | 10x0.1mm CCS wires |
| Wire Length | 25cm |
| Alligator Clips | 46-mm alligator clips |
| Additional Features | High grip PVC covering on deluxe jumper test leads |
Similar Products
- Deluxe Jumper Test Leads with Alligator Clips
- Color Coded Jumper Wires with Alligator Clips
- High Grip PVC Test Lead Set
- 10 Piece Alligator Clip Test Lead Set
- Color Coded Jumper Wires Set
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: Use with caution and follow proper safety procedures when handling jumper wires and test lead sets with alligator clips. Keep out of reach of children and avoid contact with water or other liquids. Do not use if wires are frayed or damaged. Use only as intended and follow manufacturer's instructions. Failure to do so may result in injury or damage to equipment.
Perfect for:
- Electronic hobbyists and DIY enthusiasts
- Electrical engineering students
- Professionals in the electronics industry
- Teachers and instructors of electronics courses
- Anyone who needs to make quick and reliable connections in electronic circuits
Lead Metal Wire, 5 Foot Coil
This lead (Pb) wire has a 1/8" diameter and is 5 feet long. Lead is a soft, heavy metal with a dull gray appearance that tarnishes when exposed to air. Freshly cut lead has a bluish-white luster. Highly malleable and ductile, lead is resistant to corrosion and has been used in pipes and containers for corrosive liquids like sulfuric acid. It is ideal for experimentation, practical use, or as a unique addition to a metal collection.
Product Specifications
| Material | Lead (Pb) |
| Length | 5 feet |
| Diameter | 1/8 inch |
| Key Properties |
Soft, malleable, ductile Corrosion-resistant Heavy metal Poor conductor of electricity |
Applications and Benefits:
- Experimentation and practical use
- Metal collection
- Containers for corrosive liquids
- Demonstration of malleability and ductility
Additional Information:
Lead metal is highly resistant to corrosion and has been historically used for pipes and containers. Handle with care due to its toxic nature. For further details, download the Safety Data Sheet.
- 1