Advanced Search Results
Refine your search by using the category filter.
AK100 Silicone Fluid, 100 Cst
AK100 Silicone Oil is a non-reactive and viscous linear polydimethylsiloxane with a viscosity of approximately 100 mm²/s. This clear colorless liquid has outstanding properties that set it apart from organic materials like mineral oils. With applications ranging from lubricants and release agents to hydraulic fluids and heat-resistant lubricants, AK100 Silicone Oil is a versatile tool for industrial and commercial use.
Experience the outstanding performance of AK100 Silicone Oil for your industrial lubrication and release needs. Comparable to Wacker brand codes, our silicone fluid products are manufactured and marketed to chemical manufacturers, lubricant and fluid suppliers, and industrial and commercial users.
Product Specifications
| Chemical Name | Polydimethylsiloxane |
| Synonyms | Dimethylpolysiloxane, Dimethicone, Silicone oil, Silicone fluid |
| Molecular Formula | (C₂H₆OSi)ₙ |
| CAS Number | 63148-62-9 |
| Appearance | Clear colorless liquid |
| Density at 25ºC | Approx. 0.96 g/cm³ |
| Refractive Index | 1.401 - 1.405 g/cm³ |
| Flash Point | > 275ºC |
| Ignition Temperature | Approx. 450ºC |
| Surface Tension at 25ºC | 0.021 N/m |
| Viscosity, Dynamic at 25ºC | 100 mPa·s |
| Viscosity, Kinetic at 25ºC | Approx. 100 mm²/s |
| Volatile Content | 1.5% max |
Applications and Benefits:
- Industrial lubricant for machinery
- Release agent in molding operations
- Hydraulic fluid component
- Heat-resistant lubricant applications
- Chemical manufacturing processes
- Used by lubricant and fluid suppliers
- Commercial equipment lubrication
Caution:
Figures are intended as a guide and should not be used in preparing specifications. Always refer to SDS before use. ADD SDS LINK HERE
Dibutyl Phthalate (DBP)
Dibutyl phthalate is a man-made chemical added to plastics and other materials. It acts as a plasticizer, helping to keep plastics soft. Other uses include elastomers, lacquers, explosives, printing inks, resin solvents, perfume oil solvents, paper coatings, adhesives, nail polish, and solid rocket propellants. For laboratory and research use only. Read the Safety Data Sheet before ordering or using. DBP is banned for use in children's toys.
Product Specifications
| Appearance | Clear |
| Ester Content | 99.50 ≤ Value ≤ 100.00 wt% (Result: 99.53 wt%) |
| Water in Volatile Solvents | 0.000 ≤ Value ≤ 0.100 wt% (Result: 0.100%) |
| Acidity (as Phthalic Acid) | 0.000 ≤ Value ≤ 0.010 wt% (Result: 0.003 wt%) |
| Color | 0 ≤ Value ≤ 20 APHA (Result: 14 APHA) |
| Specific Gravity at 20°C | 1.047 ≤ Value ≤ 1.049 (Result: 1.047) |
| Refractive Index at 25°C | 1.49000 ≤ Value ≤ 1.49200 (Result: 1.49090) |
Applications and Benefits:
- Plasticizer for plastics
- Used in elastomers
- Lacquers and printing inks
- Resin and perfume oil solvents
- Paper coatings and adhesives
- Nail polish ingredient
- Solid rocket propellant
Caution:
For professional use only. Banned in children's toys. Handle with care and follow safety precautions.
Red Silicone Tubing, 1/16" ID x 3/16" OD
Flexible colored silicone elastomer tubing provides resilient performance for compact technical assemblies where visual identification and routing flexibility are required. Its non-reinforced construction allows easy handling in small-scale setups while supporting use with air and compatible general-purpose fluids.
Product Specifications
| Material | Silicone Rubber |
| Color | Red |
| Inside Diameter | 0.062" nominal |
| Nominal ID | 1/16" |
| Outside Diameter | 0.187" nominal |
| Nominal OD | 3/16" |
| Wall Thickness | Approx. 0.0625" |
| Nominal Wall | 1/16" |
| Durometer | 60 ±5 Shore A |
| Construction | Non-Reinforced |
| Metric ID | Approx. 1.57 mm |
| Metric OD | Approx. 4.75 mm |
| Metric Wall | Approx. 1.59 mm |
Applications and Benefits:
- Used with laboratory equipment requiring compact flexible tubing.
- Supports compatible fluid-transfer applications.
- Used as small air lines in technical assemblies.
- Suitable for instrumentation routing and connection tasks.
- Fits small pumps and compact flow systems.
- Supports prototyping where flexible tubing is required.
- Suitable for educational laboratory setups.
- Used in technical assemblies requiring non-reinforced silicone tubing.
- Provides flexibility and resilience for general-purpose silicone tubing applications.
- Provides red color identification for tubing runs.
- Provides good resistance to heat and environmental aging.
- Provides excellent resistance to ozone and UV exposure.
Caution:
Operating temperature, pressure rating, chemical compatibility, and regulatory compliance depend on the specific silicone formulation and application conditions. No FDA, USP, NSF, food-grade, medical-grade, platinum-cured, or peroxide-cured certification is claimed unless specifically provided with the product documentation.
Silicone Fluid, 1000 Cst
Silicone Oil with a viscosity of approximately 1000 mm²/s, featuring a linear, non-reactive polydimethylsiloxane structure. Offers exceptional performance compared to organic materials like mineral oils.
Product Specifications
| Appearance | Clear, colorless liquid |
| Density at 25ºC | Approx. 0.97 g/cm³ |
| Refractive Index | 1.401 - 1.405 |
| Flash Point | > 314ºC |
| Ignition Temperature | Approx. 450ºC |
| Surface Tension at 25ºC | 0.021 N/m |
| Viscosity, Dynamic at 25ºC | 1000 mPa.s |
| Viscosity, Kinetic at 25ºC | Approx. 1000 mm²/s |
| Volatile Content | 1.5% max. |
Applications and Benefits:
- Lubricant and anti-friction agent.
- Release agent for molds and high-performance digital-printing machines.
- Surface care and polish.
- Hydraulic and transformer fluids.
- Damping and diffusion pump fluids.
- Heat-resistant lubricant and dielectric fluid.
- Defoaming agent for oil, gas, and diesel applications.
- Automotive care, including paint applications.
- Light lubricant for treadmills, used alone or mixed with AK350.
Caution:
For industrial/professional use only. Refer to the SDS for safety guidelines.
Silicone Fluid, 350 Cst
Silicone Oil with a viscosity of approximately 350 mm²/s, featuring a linear, non-reactive polydimethylsiloxane structure. Offers exceptional performance compared to organic materials like mineral oils.
Product Specifications
| Density at 25ºC | Approx. 0.97 g/cm³ |
| Flash Point | > 300ºC |
| Ignition Temperature | Approx. 450ºC |
| Surface Tension at 25ºC | 0.021 N/m |
| VOC (Volatile Organic Content) | < 1.5% |
| Viscosity, Kinetic at 25ºC | Approx. 350 mm²/s |
Applications and Benefits:
- Lubricant and anti-friction agent.
- Release agent for molds and high-performance digital-printing machines.
- Surface care and polish.
- Hydraulic and transformer fluids.
- Damping and diffusion pump fluids.
- Heat-resistant lubricant and dielectric fluid.
- Defoaming agent for oil, gas, and diesel applications.
- Automotive care, including paint applications.
- Light lubricant suitable for spraying, including treadmill maintenance.
Caution:
For industrial/professional use only. No COA provided. Refer to the SDS for safety guidelines.
- 1