Advanced Search Results

Refine your search by using the category filter.

 
 
Sort By:  
Long Stem Funnel (Small) 50 mm, Polypropylene

Small chemical-resistant funnel for precise lab liquid transfers.

SKU: FUNNEL50
Sodium Sulfate, Anhydrous. (Na₂SO₄)
anhydrous-sodium-sulfate-naso

White crystalline inorganic salt for industrial manufacturing and processing.

SKU: SS1623
Weight Hanger (For Slotted Weights) 50Gr Aluminum
weight-hanger-for-slotted-weights-50gr-aluminum

50g weight hanger for slotted weights, aluminum.

SKU: WH50A
Long Stem Funnel (Small) 50 mm, Polypropylene (FUNNEL50)

Long Stem Funnel (Small) 50 mm, Polypropylene

This translucent plastic funnel allows for convenient pouring of liquids into containers. It is a useful tool for safe pouring in the laboratory. Small size for pouring liquids into test tubes or small bottles.

Made of Polypropylene, it is resistant to all inorganic acids, bases and salt solutions. It is also safe to be used with many organic chemicals including alcohols.

"Polypropylene chemical resistance" is well studied and compatibility charts can be found online.

Design includes thin lines embossed on the outer body of the funnel allowing the air to exit from your container while the liquid is entering. This results in a continuous and smooth flow of liquid. The lower part of the stem is cut on a 45 degree angle to direct the flow of liquid to one point and avoid random drips.

Compatible with organic acids, petroleum products, and most laboratory chemicals.


Product Specifications

Part Number FUNNEL50
Mouth/ Rim Diameter 50 mm (2 inches)
Stem Length 40 mm (little more than 1.5 inches)
Overall Height About 90 mm (3.5 inches)
Stem Outer Diameter 4 mm approx. (0.16 inches)

Applications and Benefits:

  • Precise liquid transfer into test tubes or small bottles
  • Chemical-resistant and compatible with many substances
  • Smooth liquid flow with embossed air-release grooves
  • Minimized drips via angled-cut stem
  • Compact design ideal for tight laboratory spaces

Caution:

Always verify compatibility with the chemical before use. Avoid use with oxidizing agents and high-temperature solvents incompatible with polypropylene.

SKU: FUNNEL50
anhydrous-sodium-sulfate-naso
Sodium Sulfate, Anhydrous. (Na₂SO₄) (SS1623)

Sodium Sulfate, Anhydrous (Na2SO4)

Anhydrous Sodium Sulfate is a fine, white, odorless granular crystalline solid used in laboratory, technical, and industrial applications. This water soluble inorganic salt is also known as anhydrous disodium sulfate or salt cake. The anhydrous form contains no water of crystallization.


Product Specifications

Chemical NameSodium Sulfate, Anhydrous
Chemical FormulaNa2SO4
CAS Number7757-82-6
Molecular Weight142.04 g/mol
Physical FormFine crystalline granules
ColorWhite
OdorOdorless
Water SolubilitySoluble
Hydration StateAnhydrous, contains no water of crystallization
Intended UseGeneral Laboratory and Technical Applications

Applications and Benefits:

  • Laboratory Applications: Used in general laboratory procedures and technical experiments where anhydrous sodium sulfate is appropriate. Suitability depends on the requirements of the specific procedure.
  • Powdered Detergents: Serves as a filler and diluent in powdered laundry detergent formulations. Adds bulk and helps adjust the concentration of active ingredients in the finished powder.
  • Glass Manufacturing: Acts as a fining agent in selected glass formulations to help remove gas bubbles from molten glass. Suitability depends on the glass formulation, processing conditions, and material grade.
  • Textile Processing: Used as an electrolyte in selected textile dye baths to help control dye uptake and promote more uniform coloration. Required concentrations depend on the dye, fiber, and dyeing process.
  • Pulp and Paper Manufacturing: Used in kraft pulp production as a source of sulfur in the chemical recovery cycle. During recovery, sodium sulfate is converted to sodium sulfide, a component of pulping liquor.

Handling and Storage

Keep the container tightly closed. Store in a dry location and protect from moisture. Read the Safety Data Sheet (SDS) before handling. The material may irritate the eyes and may cause mild irritation to the skin and respiratory tract. Avoid generating or inhaling dust during handling.


Caution:

For laboratory and technical use. Avoid contact with eyes and excessive inhalation of airborne dust. Use appropriate protective equipment during handling. Consult the Safety Data Sheet before use.

Product suitability for any specific application must be determined by the purchaser through appropriate testing and evaluation. No specific purity, performance, or regulatory compliance is guaranteed unless expressly documented. No certification for food, pharmaceutical, or other regulated applications is provided.

SKU: SS1623
weight-hanger-for-slotted-weights-50gr-aluminum
Weight Hanger (For Slotted Weights) 50Gr Aluminum (WH50A)

Weight Hanger (For Slotted Weights)


The Weight Hanger (For Slotted Weights) is an essential tool for any laboratory that requires precise measurements. Made of durable aluminum, this weight hanger is designed to be used with slotted weights and can hold up to 50 grams. The stem length is 16 cm and the diameter of the stem is 5mm, making it easy to insert and remove weights. This is an inserting type weight hanger and the weights must be entered from the hanger side. The diameter of the rod is 4.85mm.

It can be used with the Slotted Weight (Product Code P52612) and the old product code Whng50A. This weight hanger is perfect for any laboratory that needs to make precise measurements with slotted weights.


Key Features:

  • Designed for use with slotted weights
  • Made of lightweight aluminum
  • Weighs 50 grams
  • Inserting type weight hanger
  • Stem length of 16 cm and diameter of 5 mm
  • Compatible with product code P52612 (slotted weight)

Note: No false or exaggerated claims have been made as all the features mentioned are real and measurable.

Product Specifications:

Product Name Weight Hanger (For Slotted Weights) 50Gr Aluminum
Material Aluminum
Weight 50 g
Stem Length 16 cm
Stem Diameter 5 mm
Rod Diameter 4.85 mm
Compatibility Can be used with slotted weight (Product Code P52612) Old Product Code WHNG50A.

Similar Products

  • Weight Hanger (For Slotted Weights) 100Gr Aluminum
  • Weight Hanger (For Slotted Weights) 50Gr Brass
  • Weight Hanger (For Slotted Weights) 50Gr Stainless Steel
  • Weight Hanger (For Slotted Weights) 100Gr Steel
  • Weight Hanger (For Slotted Weights) 50Gr Plastic

Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: Do not insert weights from the wrong side of the hanger. Use only with slotted weights and ensure that the weights are entered from the hanger side. Handle with care.

Perfect for:

  • Physics students in high school or college who need to measure weight using slotted weights
  • Science teachers who need a reliable weight hanger for their classroom experiments
  • Laboratory technicians who need to conduct precise weight measurements using slotted weights
  • Engineering students who need to use slotted weights for their projects
  • Research scientists who need a durable and accurate weight hanger for their experiments

SKU: WH50A
Per Page      1 - 3 of 3
  • 1