Advanced Search Results
Refine your search by using the category filter.
Highly conductive graphite rods for electrolysis and chemical experiments.
Versatile clamp for various rod diameters with chrome-plated screws.
High-purity, high-density spherical copper powder for enhanced conductivity and versatility.
Carbon Rods Set
Carbon Rods Set is a collection of five highly conductive and resistant to acidic and alkaline solutions graphite rods. These rods are an excellent alternative to platinum electrodes for some electrolysis experiments. Each graphite rod is approximately 9 inches (20 cm) long and about 5 mm in diameter. Alligator clips can be used for making wire connections. The price is for a set of five carbon rods, and the minimum order quantity is one set. Bulk discounts or bulk pricing apply to all orders of 10 sets and more. This set of carbon rods is perfect for electrolysis of reactive materials and chemical solutions and other compounds.
Key Features:
- Carbon Rods, Graphite Rods, and Carbon Electrode Rods included in set
- Highly conductive for efficient electrolysis
- Resistant to acidic and alkaline solutions for durability
- Suitable alternative to platinum electrodes for some experiments
- Each graphite rod is approximately 9 inches (20 cm) long and 5 mm in diameter
- Bulk discounts available for orders of 10 sets or more
Product Specifications:
| Product Name | Carbon Rods, Graphite Rods, Carbon Electrode Rods, Set Of 5 Graphite, Carbon, Electrode Carbon Rods |
| Features | Highly Conductive, Resistant To Acidic And Alkaline Solutions, Suitable Alternative To Platinum Electrodes For Some Electrolysis Experiments |
| Dimensions | Each Graphite Rod Is About 9 Inches (20 Cm) Long And About 5 Mm In Diameter |
| Recommended Use | May Be Used For Electrolysis Of Reactive Materials And Chemical Solutions And Other Compounds |
| Wire Connections | Alligator Clips Can Be Used For Making Wire Connections |
| Price | Price Is For A Set Of Five Carbon Rods. Minimum Order Quantity Is One Set. Bulk Discounts Or Bulk Pricing Apply To All Orders Of 10 Sets And More |
Similar Products
- Graphite Electrodes
- Carbon Fiber Rods
- Graphene Rods
- Carbon Nanotube Electrodes
- Carbon Ceramic Rods
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution:
These carbon and graphite rods are highly conductive and may pose a hazard if not handled properly. They are resistant to acidic and alkaline solutions, but caution should still be exercised when using them for electrolysis of reactive materials and chemical solutions. Alligator clips should be used for making wire connections. Keep out of reach of children.Perfect for:
- Chemistry students and teachers
- Science enthusiasts and hobbyists
- Researchers in the field of electrolysis
- Individuals looking for a cost-effective alternative to platinum electrodes
- Customers looking for bulk orders and discounts
- Anyone in need of highly conductive and resistant carbon rods
Cast Iron Powder, Thermal Spray
Cast iron powder used in the manufacturing of specialty alloys and as an ingredient in pyrotechnic mixtures. Also suitable for thermal spray applications, with recommendations to consider S1001 and S145C for such purposes. Engineered for industrial use with high metallic iron content and controlled granulation.
Product Specifications
| Metallic Iron | >90% |
| Total Carbon | 2.85% |
| Manganese | <1.0% |
| Silicon | <3.0% |
| Chromium | <1.0% |
| Granulation | Passing 20 mesh: 95-100%, Passing 100 mesh: 1% Max. |
Applications and Benefits:
- Manufacturing of specialty alloys
- Ingredient in pyrotechnic mixtures
- Thermal spray applications
- High iron content for industrial use
- Controlled granulation for specific needs
Caution:
Evaluate product suitability before large-scale use. For thermal spray applications, also consider S1001 and S145C. Store in a dry, cool place to maintain granulation and performance.
Citric Acid 99.5%, Fine Crystals, Food Grade
Citric Acid, anhydrous, USP, FCC, food grade. Widely used in the preparation of citrates, flavoring extracts, confections, and soft drinks. Functions as an acidifier, dispersing agent, and antioxidant in foods. Additional uses include water conditioning, detergent building, and cleaning or polishing stainless steel and other metals. Combustible but non-toxic. Very soluble in water and alcohol. CAS # [77-92-9], C6H8O7.
Product Specifications
| CAS Number | 77-92-9 |
| Chemical Formula | C6H8O7 |
| Grade | Food Grade (USP, FCC) |
| Synonyms | Beta-hydroxytricarballylic acid, Citralite, Hydroxytricarballylic acid |
| Solubility | Very soluble in water and alcohol |
Applications and Benefits:
- Preparation of citrates
- Flavoring extracts and confections
- Soft drinks acidifier
- Food antioxidant
- Water conditioning agent
- Detergent builder
- Cleaning and polishing stainless steel and metals
Caution:
Store in a dry, cool environment. Avoid ignition sources due to combustibility. Test for suitability in specific applications before use.
Clamp Holder, Right Angle (Bosshead)
The Clamp Holder, Right Angle (Bosshead) provides a sturdy, metal solution for joining two rods at 90° to create L or T configurations. Constructed from die‑cast zinc alloy with plated brass thumbscrews, it accommodates rods up to 18 mm in diameter and weighs 80 g, making it suitable for laboratory stands and workshop assemblies.
Product Specifications
| Product Name | Clamp Holder, Right Angle (Bosshead) |
| Product Type | Holder, Clamp, Right Angle, Bosshead |
| Material | Die‑cast zinc alloy with plated brass thumbscrews |
| Maximum Rod Diameter | 18 mm |
| Intended Use | Connecting two rods at right angles to form L or T shapes |
| Compatibility | Accepts or clamps to rods up to 18 mm diameter |
| Main Use | Attaching clamps to the vertical rod of a laboratory stand |
| Weight | 80 g |
| SKU | AS2063_01 |
| Caution | Clamp may break if excessive force is applied to the screw |
Applications and Benefits:
- Laboratory experiments requiring precise rod alignment
- Workshop assemblies where a right‑angle connection is needed
- Mounting additional clamps or accessories on a vertical stand rod
- Construction of L‑shaped or T‑shaped support structures in research setups
Key Features and Benefits
- Die‑cast zinc alloy provides high strength and corrosion resistance
- Plated brass thumbscrews ensure smooth adjustment and secure fastening
- Accepts rods up to 18 mm, covering most standard laboratory and workshop rods
- Compact L/T geometry enables versatile configuration options
- Lightweight (80 g) design simplifies handling and reduces overall load on stands
Caution:
Do not exceed recommended force limits on the thumbscrew; excessive torque may cause the clamp to fracture.
Clamp Holder, Right-Angle (Bosshead)
The Right-Angle Clamp Holder (Bosshead) is a versatile tool for laboratory use. Made of cast iron and painted black, this clamp holder features a large, easy-to-use thumbscrew. It measures 4.5 inches (~10cm) long and can support rods up to 3/4 inches (~15 millimeters) in diameter. This tool is perfect for securing laboratory equipment in a variety of positions and angles.
Product Specifications
| Product Type | Holder, Clamp, Right-Angle, Bosshead |
| Material | Cast Iron |
| Color | Black |
| Thumbscrew Size | Large, easy to use |
| Length | 4.5 inches (~10cm) |
| Rod Support Size | Up to 3/4 inches (~15 millimeters) |
Applications and Benefits:
- Science teachers
- Lab technicians
- University students in science programs
- High school students in science classes
- Industrial professionals in the manufacturing industry
- Anyone in need of a sturdy clamp for holding items at a right angle
Caution:
Ensure clamps are securely tightened before use to prevent equipment from slipping or falling.
Round Clamp (Bosshead)
This Round Clamp (Bosshead) is made of Zinc Die Cast and is fitted with Brass Chrome-Plated Thumb Screws. It is suitable for Rod Diameters from 9 mm to 16 mm. This versatile clamp can be used for a variety of purposes in laboratory settings, such as holding test tubes or other equipment in place. Its sturdy construction ensures that it can withstand regular use and provide reliable support.
Product Specifications:
| Product Type | Clamp, Round (Bosshead) |
| Shape | Round |
| Clamp Type | Bosshead Clamp |
| Material | Zinc Die Cast |
| Thumb Screws | Brass Chrome-Plated |
| Rod Diameter Compatibility | 9 mm to 16 mm |
| Additional Features | Fitted With Bosshead |
Similar Products
- Round Clamp with Chrome-Plated Screws
- Bosshead Clamp for Rods 9-16mm
- Round Bosshead Clamp with Brass Fittings
- Zinc Die Cast Round Clamp with Chrome-Plated Screws
- Bosshead Clamp with Adjustable Round Fittings
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: This product is intended for use with rod diameters between 9mm and 16mm only. Use with larger or smaller rods may result in damage or failure.
Perfect for:
- Science teachers
- Chemistry professors
- Lab technicians
- Physics students
- Engineering students
- Research scientists
Claisen Type Connecting Tubes
Claisen Type Connecting Tubes are essential components in any laboratory setting. These tubes are designed to connect various pieces of laboratory equipment, allowing for seamless experimentation and testing. The Claisen Type design ensures a secure and tight fit, preventing any leaks or spills. These tubes are made from high-quality materials, ensuring durability and longevity. Whether you're a student or a professional, Claisen Type Connecting Tubes are a must-have for any laboratory.
Product Specifications:
| Product Name: | Connecting Tubes |
| Type: | Claisen Type Tubes |
| Usage: | Connecting |
| Compatibility: | Claisen Connecting Tubes |
| Material: | Claisen Type Connecting Tubes |
| Size: | Claisen Type Connecting Tubes |
| Color: | Claisen Type |
Perfect For:
- Chemistry students and professionals
- Laboratory technicians and researchers
- Science educators and instructors
- Chemical manufacturers and suppliers
- Pharmaceutical companies and researchers
- Biotech companies and researchers
Copper Powder 99.3%, Mesh 325
Ultra-fine, high-purity copper powder made via water atomization and hydrogen reduction. Features spheroidal particles and clusters, offering higher conductivity and lower density. Suitable for metal injection molding and applications requiring high conductivity and purity. Typical applications include conductive inks, paints, pastes, thermal sprays, and sintered products. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will show conductivity when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.31% |
| Hydrogen Loss | 0.39% |
| Apparent Density | 2.97 g/cc |
| Mesh Size | 325 mesh |
| Sieve Analysis |
+60 Mesh: 0% -60/+80 Mesh: 0% -80/+100 Mesh: 0% -100/+140 Mesh: Trace -140/+200 Mesh: Trace -200/+325 Mesh: 0.6% -325 Mesh: 99.4% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Conductive inks, paints, and pastes
- Injection molding
- Thermal management
- EDM electrodes
- Antifouling paints
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder 99.5% - 99.9%
Ultra-fine, very high purity copper powder made via air atomization and hydrogen reduction. Features spherical particles with high conductivity and density. Recommended for diverse applications, including thick and thin film pastes, capacitor chips, end cap terminators, and thermal sprays. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will show conductivity when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.81% |
| Iron | 0.01% |
| Hydrogen Loss | 0.18% |
| Apparent Density | 4.89 g/cc |
| Sieve Analysis | +200 Mesh: 0% -200/+325 Mesh: 4.8% -325 Mesh: 95.2% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Capacitor chips
- End cap terminators
- Conductive inks, paints, and pastes
- Injection molding
- Electronics
- Thermal management
- EDM electrodes
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Dark Copper Powder 99.5% - 99.9%
Ultra-fine, very high purity copper powder made via air atomization and hydrogen reduction. Features spherical particles with high conductivity and density. Recommended for diverse applications, including thick and thin film pastes, capacitor chips, end cap terminators, and thermal sprays. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will show conductivity when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.81% |
| Iron | 0.01% |
| Hydrogen Loss | 0.18% |
| Apparent Density | 4.89 g/cc |
| Sieve Analysis | +200 Mesh: 0% -200/+325 Mesh: 4.8% -325 Mesh: 95.2% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Capacitor chips
- End cap terminators
- Conductive inks, paints, and pastes
- Injection molding
- Electronics
- Thermal management
- EDM electrodes
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
Copper Powder 99.8%, Electronic Grade, Mesh 325
Electronic grade, high-purity copper powder made via water atomization and hydrogen reduction. Features ultra-fine, spheroidal particles with high conductivity and low density. Recommended for a variety of applications where conductivity is crucial, including thick and thin film pastes, capacitor chips, and thermal sprays. Note: Pure copper powders may not exhibit conductivity under low-voltage tests but will conduct when compacted or mixed with oils or resins.
Product Specifications
| Purity | 99.85% |
| Hydrogen Loss | 0.19% |
| Apparent Density | 2.97 g/cc |
| Mesh Size | 325 mesh |
| Sieve Analysis | +60 Mesh: 0% -60/+80 Mesh: 0% -80/+100 Mesh: 0% -100/+140 Mesh: Trace -140/+200 Mesh: Trace -200/+325 Mesh: 0.6% -325 Mesh: 99.4% |
| HTS Code | 7406.10.0000 |
| NMFC | 30743 |
| CAS No. | 7440-50-8 |
Applications and Benefits:
- Thick and thin film pastes
- Capacitor chips
- End cap terminators
- Conductive inks, paints, and pastes
- Injection molding
- Electronics
- Thermal management
- EDM electrodes
- Thermal sprays
- Sintered alloys/products
- Brazing/soldering paste
Caution:
Handle with care. Refer to the SDS for detailed safety guidelines.
For MSDS Go to Downloads TabCU118SP Copper Powder, Fine, Spherical
Our specification guarantees that at least 80% of this powder are particles smaller than 44 micron. A typical analysis however shows that 88% of particles are smaller than 44 micron. Most particles are between 16 micron and 28 micron.
Applications include cold casting, 3-D printer filaments, metal clay, sintering, Green/ blue patina and rust effect, preventing mold in concrete, plaster,dry-wall, paint, adhesives and grout.
Also used in 3D printing process known as Selective Powder Deposition (SPD)
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features:
- High-purity, high-density spherical copper powder
- Provides high heat conductivity and electrical conductivity
- Suitable for various applications, including cold casting, 3-D printer filaments, metal clay, sintering, green/blue patina and rust effect, preventing mold in concrete, plaster, dry-wall, paint, adhesives, and grout
- Used in the 3D printing process known as Selective Powder Deposition (SPD)
- Particle size distribution with 88% of particles smaller than 44 micron
Product Specifications:
| Copper Purity | Over 99.5% |
| Hydrogen Loss | Less than 0.7% |
| Apparent Density | 4.5-5.5 g/cc |
| Typical Analysis | Copper > 99.5% Hydrogen Loss < 0.7% Apparent Density, g/cc: 4.5 - 5.5 Passing mesh 325 (44 micron): 80% ~ 88% |
Similar Products:
- Ultra-Fine Copper Powder
- High-Purity Copper Foil
- Copper Wire
- Copper Rod
- Copper Sheet
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for enhanced conductivity and versatility applications, including cold casting, 3-D printing, metal clay, and more.
Copper Powder CU112SP
CU112SP is a super fine, high density, high purity spherical copper powder that provides high heat conductivity and electrical conductivity properties to your products.
Our specification guarantees that at least 95% of this powder are particles smaller than 44 micron. A typical analysis however shows that 99.9% of particles are smaller than 44 micron. Most particles are between 10 micron and 22 micron.
HTS Code: 7406.10.0000.
NMFC: 30743
CAS: 7440-50-8
Applications include cold casting, 3-D printer filaments, metal clay, sintering, Green/ blue patina and rust effect, preventing mold in concrete, plaster,dry-wall, paint, adhesives and grout.
Also used in 3D printing process known as Selective Powder Deposition (SPD)
Old product code: CU155A
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features
- Super fine, spherical particles
- High density and purity
- Excellent thermal and electrical conductivity
- Consistent particle size distribution
- Versatile applications in industry and art
Product Specifications
| Particle Size | 95% < 44 microns |
| Purity | > 99.2% Copper |
| Apparent Density | 4.5 - 5.5 g/cc |
| Hydrogen Loss | < 0.7% |
| Mesh Passing | 99.9% through 325 (44 micron) |
Similar Products
- Fine silver powder, high conductivity
- Spherical bronze powder, 3D printing
- Fine aluminum powder, thermal conductivity
- High-purity zinc powder, corrosion resistance
- Spherical titanium powder, lightweight strength
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for 3D Printing Enthusiasts, Industrial Manufacturers, Electronics Professionals, Artists and Sculptors, Construction Material Suppliers
Copper Sulfate, Pentahydrate, 99.9%
Copper Sulfate (Copper (II) Sulfate; Copper Sulphate; Cupric Sulfate; Blue Vitriol; Blue Stone, Blue Copperas) CuSO4.5H2O. High-purity grade, 99.9%.
Product Specifications
| CAS Number | 7758-99-8 (CuSO4.5H2O) |
| Grade | 99.9% High Purity |
Applications and Benefits:
- Electroplating
- Feed additive
- Germicides
- Textile mordant
- Leather industry
- Pigments
- Electric batteries
- Copper salts
- Wood preservative
- Agricultural use (soil additive, pesticides, fungicide)
Caution:
Toxic by ingestion. Strong irritant. Handle with care.
Cork Borer With Plastic Handle, Set Of 6
The Cork Borer With Plastic Handle, Set Of 6 provides precise, clean‑edged holes in cork or similar materials. Each borer features a nickel‑plated brass tip and an ergonomically shaped plastic handle that is numbered for easy identification. The complete set (SKU P32101) weighs 112 g, offering durable, long‑lasting performance for laboratory applications.
Product Specifications
| Product Name | Cork Borer With Plastic Handle, Set Of 6 |
| Material | Nickel-Plated Brass, Plastic |
| Handle Type | Plastic |
| Number of Units | 6 |
| Handle and Punch | Yes |
| Numbered Handles | Yes |
| SKU | P32101 |
| Weight | 112 g |
Applications and Benefits:
- Science teachers and educators
- Students in science classes or labs
- Researchers in the scientific field
- Chemists and biologists
- Universities and colleges with science programs
- Laboratories and research facilities
Key Features and Benefits
- Precise holes with clean edges
- Durable and long-lasting
- Convenient plastic handle for easy grip and handling
- Numbered handles for identification purposes
Cotton Cellulose Paper
The Cotton Cellulose Paper is a highly absorbent paper made of 100% pure cotton. It can be used as both a chromatography paper and filter paper. As a high-quality filter paper, it can filter solids as small as 2.5 um. It can also be used as chromatography and electrophoresis paper with water and a variety of solvents. The paper comes in a 50cm x 50cm sheet folded for simplified shipping. This paper is perfect for those looking for a reliable and versatile option for their chromatography and filtration needs.
Product Specifications:
| Material | 100% pure cotton cellulose |
| Dimensions | 50cm x 50cm sheet, can be cut into 75 or more chromatography strips (3/4" x 6" or 2 cm x 15 cm) |
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: Handle the Cotton Cellulose Paper with care as it can filter solids as small as 2.5 um. Use appropriate protective gear when handling.
Perfect for:
- Scientists and researchers in the fields of chemistry and biology
- Lab technicians and professionals working in the pharmaceutical industry
- Students studying chromatography and electrophoresis
- Individuals conducting experiments and research in their home labs
Similar Products
- Cellulose Filter Paper
- High-Quality Chromatography Paper
- 100% Cotton Filter Paper
- Ultra-Fine Filter Paper
- Chromatography and Electrophoresis Paper
Aluminum Metal Cubes
These lightweight aluminum cubes are perfect for density comparison and experimentation. Made with precision machining, they are available in 10mm or 20mm sizes, and are an excellent addition to any laboratory or classroom.
Key Features
- Precision machining
- Lightweight aluminum material
- Available in 10mm or 20mm sizes
Product Specifications
| Material | Aluminum |
| Density | 2.7 g/cm3 |
| Size Options | 10mm or 20mm |
| Weight | Varies by size |
Perfect for:
- Science teachers and students
- Laboratory technicians
- Chemistry enthusiasts
- Physics enthusiasts
- Engineering students
- Metalworking hobbyists
Similar Products
- Copper Metal Cubes
- Brass Metal Cubes
- Titanium Metal Cubes
- Steel Metal Cubes
- Nickel Metal Cubes
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Caution: Handle with care. These cubes are made of aluminum, which can be a hazard if not handled properly. Keep out of reach of children and use appropriate safety equipment when conducting experiments.
Brass Metal Cubes
Looking for high-quality brass cubes for density comparison and experimentation? Look no further than our Brass Metal Cubes! Available in both 10mm and 20mm sizes, these precision machined cubes are made from top-quality brass material.
Key Features:
- Precision machining
- High-quality brass material
- Available in 10mm or 20mm sizes
Product Specifications:
| Material | Brass |
| Density | 8.4 g/cm3 |
| Size Options | 10mm or 20mm |
| Weight | Varies by size |
Similar Products:
- Copper Metal Cubes
- Aluminum Metal Cubes
- Titanium Metal Cubes
- Steel Metal Cubes
- Nickel Metal Cubes
CAUTION: Handle with care. These brass metal cubes are for experimentation and density comparison purposes only. Keep out of reach of children and avoid ingestion or inhalation. Similar products may have different properties and require research before use.
Perfect for:
- Science teachers and students
- Laboratory technicians
- Chemistry enthusiasts
- Researchers and scientists
- Engineering students
- College and university professors
Density Cubes, Metals Copper
These high-density copper cubes are for comparison and experimentation, available in 10mm or 20mm sizes, machined and made from copper material.
Product Specifications
| Material | Copper |
| Density | 8.96 g/cm3 |
| Size Options | 10mm or 20mm |
| Weight | Varies by size |
| Package Dimensions | 20 x 20 mm |
| Package Weight | 0.155 lb |
| Units per Package | 1 |
Applications and Benefits:
- Science enthusiasts
- Students studying density and material properties
- Teachers looking for hands-on classroom activities
- Researchers in materials science and engineering
Key Features and Benefits
- High-density copper material
- machined for accurate measurements
- Reusable transparent plastic case for storage
Caution:
High-density copper cubes may be hazardous if mishandled. Please use caution when handling and keep out of reach of children.
Density Cubes, Metals Iron
These iron cubes are designed for density experiments in the classroom or laboratory, available in 10mm or 20mm sizes, with precise measurements for accurate and consistent results, made from durable iron material. The cubes are packaged individually, with a weight of 0.135 lb, and are for science teachers, students, and researchers. The iron material provides a high density, making it for demonstrating density concepts.
Product Specifications
| Material: | Iron |
| Sizes: | 10mm or 20mm |
| Package Dimensions: | 20 x 20 mm |
| Weight: | 0.135 lb |
| Density: | 7.9 g/cm³ |
Applications and Benefits:
- For density experiments in the classroom or laboratory
- For science teachers, students, and researchers to demonstrate density concepts
- for hands-on learning and experimentation
Key Features and Benefits
- Iron material for high density and precise measurements
- Precise measurements for accurate and consistent results
- Reusable packaging for convenient storage
- Durable iron material for long-lasting use
Caution:
Handle with care, as iron can be sharp and heavy. Avoid touching sharp edges and keep out of reach of children.